From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Thu, 19 Jul 2018 10:41:36 -0300 Subject: [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support In-Reply-To: <20180718013602.26574-1-peng.fan@nxp.com> References: <20180718013602.26574-1-peng.fan@nxp.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Peng, On Tue, Jul 17, 2018 at 10:35 PM, Peng Fan wrote: > This patchset is to upstream i.MX8QXP and mek board support, with some > drivers update to support i.MX8QXP. The information about the processor > could be found > https://www.nxp.com/products/processors-and-microcontrollers/applications-processors/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X > > The architecture of i.MX8QXP is different from i.MX6/7/8M, inside i.MX8QXP, > there is a dedicated processor(SCU) used for power/clock/pin/ > pad/resource management/thermal and etc. I understand you are adding MX8QXP support in this series, but what happened to the previous MX8M one? I think we should get MX8M supported in U-Boot first. Also, in order to test this series we need a README file. Please prepare one so that we can test it. I hope you have managed to get rid of the custom mkimage by now :-) Thanks