From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Wed, 4 Jul 2012 14:35:32 -0300
Subject: [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
In-Reply-To: <CAOMZO5AKS1cJ_fqvYfP09DVoM7MQoLRm6CL=s38tW2dBKv0k1w@mail.gmail.com>
References: <334319B2EBE0B144BAE1402B79D82DC5D31358D5@srvpegasus>
	<CAOMZO5AKS1cJ_fqvYfP09DVoM7MQoLRm6CL=s38tW2dBKv0k1w@mail.gmail.com>
Message-ID: <CAOMZO5DUgaeF3f=9_2yqiPOPnO+2LzvdneGhh2fGDVGuGtwxVg@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wed, Jul 4, 2012 at 2:31 PM, Fabio Estevam <festevam@gmail.com> wrote:

> Take a look at Freescale U-boot as a reference:
> http://opensource.freescale.com/git?p=imx/uboot-imx.git;a=blob;f=board/freescale/mx35_3stack/flash_header.S;h=b662669f80061be18787eafea6eb3668786b6224;hb=329240314138de1fb8d3d08531e0c3408482972f

Just to clarify: this file has the RAM settings for two versions of
the board. Earlier mx35pdk came with mDDR and the more recent boards
have DDR2. Most likely your mx35pdk has DDR2 populated, do the values
you need to use are:

//DDR2 init
DCDGEN(2, 4, 0xB8001010, 0x00000304)
DCDGEN(3, 4, 0xB8001010, 0x0000030C)
DCDGEN(4, 4, 0xB8001004, 0x007ffc3f)
DCDGEN(5, 4, 0xB8001000, 0x92220000)
DCDGEN(6, 4, 0x80000400, 0x12345678)
DCDGEN(7, 4, 0xB8001000, 0xA2220000)
DCDGEN(8, 4, 0x80000000, 0x87654321)
DCDGEN(9, 4, 0x80000000, 0x87654321)
DCDGEN(10, 4, 0xB8001000, 0xB2220000)
DCDGEN(11, 1, 0x80000233, 0xda)
DCDGEN(12, 1, 0x82000780, 0xda)
DCDGEN(13, 1, 0x82000400, 0xda)
DCDGEN(14, 4, 0xB8001000, 0x82226080)
DCDGEN(15, 4, 0xB8001004, 0x007ffc3f)
DCDGEN(16, 4, 0xB800100C, 0x007ffc3f)
DCDGEN(17, 4, 0xB8001010, 0x00000304)
DCDGEN(18, 4, 0xB8001008, 0x00002000)

You just need to convert these values into the proper syntax for imximage.cfg.