From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Estevam <festevam@gmail.com>
Date: Thu, 16 May 2019 23:21:01 -0300
Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
In-Reply-To: <20190516234910.3f3edc48@jawa>
References: <CAOMZO5C-9R1mxEwmxUG3n_DUymXy-S23vU589yzZ=sq63T6+Mg@mail.gmail.com>
 <CAOMZO5AnScYwFW8Y0EiZJRthHJkdWHfswcbDBVRxqKA35pQ-jA@mail.gmail.com>
 <20190516234910.3f3edc48@jawa>
Message-ID: <CAOMZO5DcF2TBLoMT0u2YWOdH=m7gX80uX88X_RjU9Zx-pZf+iw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Lukasz,

On Thu, May 16, 2019 at 6:49 PM Lukasz Majewski <lukma@denx.de> wrote:

> Please find following repository with DM/DTS conversion for TPC70 imx6q
> board (it also has SPL DM conversion working - board boots from SD
> card and eMMC):
>
> https://github.com/lmajewski/u-boot-dfu/commits/DM-SPL-TPC70
>
> My guess is that you need the pinctrl DM support in SPL, to make the
> card detect pin working.
>
> &pinctrl_usdhc4 {
>         u-boot,dm-spl;
> };
>
> &pinctrl_usdhc2 {
>         u-boot,dm-spl;
> };
>
> &gpio2 {
>         u-boot,dm-spl;
> };
>
> And also the pinctrl-imx6q.c fix to:
>
> static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info
> __section(".data");

I tried your suggestions and now it dies even earlier:

U-Boot SPL 2019.07-rc1-00427-g504bf790da-dirty (May 16 2019 - 23:17:43 -0300)
### ERROR ### Please RESET the board ###

Thanks