Yes, I'm connecting a USB to serial device to the host (ubuntu 11.04) and I want that serial port on my VM .
I tried the solution you have suggested but still same problem , can not see the virtual serial port (ttyACM0) on VM but I could see on the HOST .
The following is the line I have tried .
RAW = [ type = "kvm",
data = "<devices><serial type=\"dev\"><source path=\"/dev/ttyACM0\"/><target port=\"0\"/></serial><console type=\"pty\" tty=\"/dev/pts/5\"><source path=\"/dev/pts/5\"/><target port=\"0\"/></console></devices>" ]
On Mon, Sep 12, 2011 at 12:35 PM, bala suru <balaqemu@gmail.com> wrote:I am not sure what you are trying to do.
> But I need to connect a some USB device which will create a virtual
> serialport called /dev/ttyACM0, I cloud not see this on the Vm running ..
>
> This XML format I used
> RAW = [ type = "kvm",
> data = "<devices><serial type=\"pty\"><source
> path=\"/dev/pts/5\"/><target port=\"0\"/></serial><console type=\"pty\"
> tty=\"/dev/pts/5\"><source path=\"/dev/pts/5\"/><target
> port=\"0\"/></console></devices>" ]
Are you attaching a USB serial device to the host and you would like
to connect that to the VM's serial port? In that case you can try
this domain XML:
<serial type="dev">
<source path="/dev/ttyACM0" />
<target port="0" />
</serial>
Stefan