Hi,
Thanks a lot , it resolved my problem .. I could get the data inside VM .

regards
Bala

On Tue, Sep 13, 2011 at 10:53 AM, Stefan Hajnoczi <stefanha@gmail.com>wrote:

> On Tue, Sep 13, 2011 at 5:59 AM, bala suru <balaqemu@gmail.com> wrote:
> > Yes, I'm connecting a USB to serial device to the host (ubuntu 11.04) and
> I
> > want that serial port on my VM .
> > I tried the solution you have suggested but still same problem , can  not
> > see the virtual serial port (ttyACM0) on VM but I could see on the HOST .
> >
> > The following is the line  I have tried .
> >  RAW = [ type = "kvm",
> >           data = "<devices><serial type=\"dev\"><source
> > path=\"/dev/ttyACM0\"/><target port=\"0\"/></serial><console type=\"pty\"
> > tty=\"/dev/pts/5\"><source path=\"/dev/pts/5\"/><target
> > port=\"0\"/></console></devices>" ]
>
> Inside the guest you will see a regular serial port (/dev/ttyS0).  The
> guest does not know that you're using /dev/ttyACM0 on the host, but
> that should not matter.
>
> Stefan
>