From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.9 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D080BC32750 for ; Fri, 2 Aug 2019 08:38:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 973192184E for ; Fri, 2 Aug 2019 08:38:59 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=amarulasolutions.com header.i=@amarulasolutions.com header.b="lDaGPq2a" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2404345AbfHBIi6 (ORCPT ); Fri, 2 Aug 2019 04:38:58 -0400 Received: from mail-wr1-f67.google.com ([209.85.221.67]:37148 "EHLO mail-wr1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730760AbfHBIi4 (ORCPT ); Fri, 2 Aug 2019 04:38:56 -0400 Received: by mail-wr1-f67.google.com with SMTP id n9so51211599wrr.4 for ; Fri, 02 Aug 2019 01:38:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=+iXBn34HynqrHicAiwBa6v98yy2VQgCDtn1EBQNd1fE=; b=lDaGPq2aIDC3X6y0L4RlVBc9UtQzyaCH7c4RyIw4+kQ3CeROdzOd1ALnm+8Wl2ImMA LuUoWqB6hawiSQ9+28zvk1/4aytgqVeQ+EoFGVzlp8oshTK6P7s2EkVP2w2DpC8YLTGJ tHvwNjgv8Hq0QI2QRsLR/tMidQ7KiCYfzNx5A= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=+iXBn34HynqrHicAiwBa6v98yy2VQgCDtn1EBQNd1fE=; b=aV0g/PEuXuZkwaSIMdT+eQiaezmSlvzxGySJ18H0aZOP4Uq9vqIlQPcdKkiUAP1J1F XoVmZaxpmwSZ8PdmQgwriWT6u0w2y2XMPGYVFgNyo1BRJUhhro5nb0+KS8jfwBSr79V2 MUtC1Z81cAZZl+Y451riMguKVvhzGBXpYkRPJSqabBIqokxRVNCAv6ojwlEsJ/EHCSgg lTZ7d5TWPKVsi1fRR9rkaTmjodU4404KqWXls3URKiZK7zchfzya0yb6zJmfnoG6JWuJ qfSLYN9pAydKp3J5eglpYA05uJir5Y6VUK5JtuIAYjBWMZEI18pDL5E08ifkAal3XeHr kL+A== X-Gm-Message-State: APjAAAV8A6DeKNJ7uHPFiTNTgQ6o7RYPcN6LXITaERrRG8y+pcUr9IsV H8fTIRcLhZ9SAEFWXayvgc+iriT0qgsCabM2XjvJGA== X-Google-Smtp-Source: APXvYqzPTfFfr4+PBZpi0wN6zYi3eiaD5NksRlFCZ759oq+VHHsiaYTeww6nlG/OMMGpLv/2X6CZWqDhh6i4/Dk99e4= X-Received: by 2002:adf:f050:: with SMTP id t16mr137018637wro.99.1564735132710; Fri, 02 Aug 2019 01:38:52 -0700 (PDT) MIME-Version: 1.0 References: <20190625144930.5hegt6bkzqzykjid@flea> <20190703114933.u3x4ej3v7ocewvif@flea> <20190711100100.cty3s6rs3w27low6@flea> <20190720065830.zn3txpyduakywcva@flea> <20190720093202.6fn6xmhvsgawscnu@flea> <20190724090513.vqnlmya3nqkl6pmu@flea> In-Reply-To: From: Michael Nazzareno Trimarchi Date: Fri, 2 Aug 2019 10:38:40 +0200 Message-ID: Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI To: Maxime Ripard Cc: Jagan Teki , David Airlie , Daniel Vetter , Chen-Yu Tsai , Michael Turquette , Rob Herring , Mark Rutland , linux-arm-kernel , linux-kernel , linux-clk , dri-devel , devicetree , linux-amarula , linux-sunxi Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Maxime On Mon, Jul 29, 2019 at 8:59 AM Michael Nazzareno Trimarchi wrote: > > Hi > > On Wed, Jul 24, 2019 at 11:05 AM Maxime Ripard > wrote: > > > > On Mon, Jul 22, 2019 at 03:51:04PM +0530, Jagan Teki wrote: > > > Hi Maxime, > > > > > > On Sat, Jul 20, 2019 at 3:02 PM Maxime Ripard wrote: > > > > > > > > On Sat, Jul 20, 2019 at 12:46:27PM +0530, Jagan Teki wrote: > > > > > On Sat, Jul 20, 2019 at 12:28 PM Maxime Ripard > > > > > wrote: > > > > > > > > > > > > On Thu, Jul 11, 2019 at 07:43:16PM +0200, Michael Nazzareno Trimarchi wrote: > > > > > > > > > tcon-pixel clock is the rate that you want to achive on display side > > > > > > > > > and if you have 4 lanes 32bit or lanes and different bit number that > > > > > > > > > you need to have a clock that is able to put outside bits and speed > > > > > > > > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of > > > > > > > > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of > > > > > > > > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of > > > > > > > > > the display. > > > > > > > > > > > > > > > > So this is what the issue is then? > > > > > > > > > > > > > > > > This one does make sense, and you should just change the rate in the > > > > > > > > call to clk_set_rate in sun4i_tcon0_mode_set_cpu. > > > > > > > > > > > > > > > > I'm still wondering why that hasn't been brought up in either the > > > > > > > > discussion or the commit log before though. > > > > > > > > > > > > > > > Something like this? > > > > > > > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 20 +++++++++++--------- > > > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 -- > > > > > > > 2 files changed, 11 insertions(+), 11 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > index 64c43ee6bd92..42560d5c327c 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct > > > > > > > drm_display_mode *mode, > > > > > > > } > > > > > > > > > > > > > > static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > > > > > > > - const struct drm_display_mode *mode) > > > > > > > + const struct drm_display_mode *mode, > > > > > > > + u32 tcon_mul) > > > > > > > { > > > > > > > /* Configure the dot clock */ > > > > > > > - clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); > > > > > > > + clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000); > > > > > > > > > > > > > > /* Set the resolution */ > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, > > > > > > > @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format); > > > > > > > u8 lanes = device->lanes; > > > > > > > u32 block_space, start_delay; > > > > > > > - u32 tcon_div; > > > > > > > + u32 tcon_div, tcon_mul; > > > > > > > > > > > > > > - tcon->dclk_min_div = SUN6I_DSI_TCON_DIV; > > > > > > > - tcon->dclk_max_div = SUN6I_DSI_TCON_DIV; > > > > > > > + tcon->dclk_min_div = 4; > > > > > > > + tcon->dclk_max_div = 127; > > > > > > > > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + tcon_mul = bpp / lanes; > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > */ > > > > > > > regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div); > > > > > > > tcon_div &= GENMASK(6, 0); > > > > > > > - block_space = mode->htotal * bpp / (tcon_div * lanes); > > > > > > > + block_space = mode->htotal * tcon_div * tcon_mul; > > > > > > > block_space -= mode->hdisplay + 40; > > > > > > > > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG, > > > > > > > @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 7; > > > > > > > tcon->dclk_max_div = 7; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 6; > > > > > > > tcon->dclk_max_div = 127; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, connector); > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > index 5c3ad5be0690..a07090579f84 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > @@ -13,8 +13,6 @@ > > > > > > > #include > > > > > > > #include > > > > > > > > > > > > > > -#define SUN6I_DSI_TCON_DIV 4 > > > > > > > - > > > > > > > struct sun6i_dsi { > > > > > > > struct drm_connector connector; > > > > > > > struct drm_encoder encoder; > > > > > > > > > > > > I had more something like this in mind: > > > > > > http://code.bulix.org/nlp5a4-803511 > > > > > > > > > > Worth to look at it. was it working on your panel? meanwhile I will check it. > > > > > > > > I haven't tested it. > > > > > > > > > We have updated with below change [1], seems working on but is > > > > > actually checking the each divider as before start with 4... till 127. > > > > > > > > > > This new approach, is start looking the best divider from 4.. based on > > > > > the idea vs rounded it will ended up best divider like [2] > > > > > > > > But why? > > > > > > > > I mean, it's not like it's the first time I'm asking this... > > > > > > > > If the issue is what Micheal described, then the divider has nothing > > > > to do with it. We've had that discussion over and over again. > > > > > > This is what Michael is mentioned in above mail "tcon-pixel clock is > > > the rate that you want to achive on display side and if you have 4 > > > lanes 32bit or lanes and different bit number that you need to have > > > a clock that is able to put outside bits and speed equal to > > > pixel-clock * bits / lanes. so If you want a pixel-clock of 40 mhz > > > and you have 32bits and 4 lanes you need to have a clock of 40 * 32 > > > / 4 in no-burst mode. " > > > > Yeah, so we need to change the clock rate. > > > > > He is trying to manage the bpp/lanes into dclk_mul (in last mail) > > > and it can multiply with pixel clock which is rate argument in > > > sun4i_dclk_round_rate. > > > > > > The solution I have mentioned in dclk_min, max is bpp/lanes also > > > multiple rate in dotclock sun4i_dclk_round_rate. > > > > > > In both cases the overall pll_rate depends on dividers, the one that I > > > have on this patch is based on BSP and the Michael one is more generic > > > way so-that it can not to touch other functionalities and looping > > > dividers to find the best one. > > > > > > If dclk_min/max is bpp/lanes then dotclock directly using divider 6 > > > (assuming 24-bit and 4 lanes) and return the pll_rate and divider 6 > > > associated. > > > > > > if dclk_mul is bpp/lanes, on Michael new change, the dividers start > > > with 4 and end with 127 but the constant ideal rate which rate * > > > bpp/lanes but the loop from sun4i_dclk_round_rate computed the divider > > > as 6 only, ie what I'm mentioned on the above mail. > > > > We've been over this a couple of times already. > > > > The clock is generated like this: > > > > PLL -> TCON Module Clock -> TCON DCLK > > > > You want the TCON DCLK to be at the pixel clock rate * bpp / > > lanes. Fine, that makes sense. > > > > Except that the patch you've sent, instead of changing the rate > > itself, changes the ratio between the module clock and DCLK. > > > > And this is where the issue lies. First, from a logical viewpoint, it > > doesn't make sense. If you want to change the clock rate, then just do > > it. Don't hack around the multipliers trying to fall back to something > > that works for you. > > > > Then, the ratio itself needs to be set to 4. This is the part that > > we've discussed way too many times already, but in the Allwinner BSP, > > that ratio is hardcoded to 4, and we've had panels that need it at > > that value. > > > > So, what you want to do is to have: > > > > TCON DCLK = pixel clock * bpp / lanes > > TCON Module Clock = DCLK * 4 > > PLL = Module Clock * Module Clock Divider (which I believe is 1 in most cases) > > pll-mipi 1 1 1 178200000 > 0 0 50000 > tcon0 2 2 1 178200000 > 0 0 50000 > tcon-pixel-clock 1 1 1 29700000 > 0 0 50000 > > This is an english problem from my side: > tcon-pixel-clock is DCLK > tcon0 must be tcon-pixel-clock * bpp / lanes because the logic need to > put a bit every cycle. > > One solution can be: > - set_rate_exclusive to tcon0 and calculate as display pixel clock * > bpp / lanes > - calculate the tcon-pixel-clock using all divider > > Problem is that the function that calculate tcon-pixel-clock does not > have any constrain on the ideal value. What you are > suggesting is not correct in my opinion or I'm not following your > suggesstion. What I know is that if we have a pixel-clock > of dvi display of 50Mhz and we have 4 lanes 32bit we need a clock in > the logic of 400Mhz (this is the ideal throughtput). > So tcon-pixel-clock is 50mhz and tcon0 is 400Mhz. > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 94f24c5e2dc5..ffb7906054e5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -338,8 +338,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon, u32 block_space, start_delay; u32 tcon_div; - tcon->dclk_min_div = bpp/lanes; - tcon->dclk_max_div = bpp/lanes; + tcon->dclk_min_div = 4; + tcon->dclk_max_div = 127; + clk_set_rate_exclusive(tcon->sclk0, mode->crtc_clock * 1000 * bpp / lanes); sun4i_tcon0_mode_set_common(tcon, mode); Something like this on top of jagan proposal Michael > Michael > > > > > > So you want to increase the PLL. Fortunately for use, this is exactly > > what a call to clk_set_rate will end up doing. > > > > Maxime > > > > -- > > Maxime Ripard, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > > > -- > | Michael Nazzareno Trimarchi Amarula Solutions BV | > | COO - Founder Cruquiuskade 47 | > | +31(0)851119172 Amsterdam 1018 AM NL | > | [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Nazzareno Trimarchi Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Date: Fri, 2 Aug 2019 10:38:40 +0200 Message-ID: References: <20190625144930.5hegt6bkzqzykjid@flea> <20190703114933.u3x4ej3v7ocewvif@flea> <20190711100100.cty3s6rs3w27low6@flea> <20190720065830.zn3txpyduakywcva@flea> <20190720093202.6fn6xmhvsgawscnu@flea> <20190724090513.vqnlmya3nqkl6pmu@flea> Reply-To: michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard Cc: Jagan Teki , David Airlie , Daniel Vetter , Chen-Yu Tsai , Michael Turquette , Rob Herring , Mark Rutland , linux-arm-kernel , linux-kernel , linux-clk , dri-devel , devicetree , linux-amarula , linux-sunxi List-Id: devicetree@vger.kernel.org Hi Maxime On Mon, Jul 29, 2019 at 8:59 AM Michael Nazzareno Trimarchi wrote: > > Hi > > On Wed, Jul 24, 2019 at 11:05 AM Maxime Ripard > wrote: > > > > On Mon, Jul 22, 2019 at 03:51:04PM +0530, Jagan Teki wrote: > > > Hi Maxime, > > > > > > On Sat, Jul 20, 2019 at 3:02 PM Maxime Ripard wrote: > > > > > > > > On Sat, Jul 20, 2019 at 12:46:27PM +0530, Jagan Teki wrote: > > > > > On Sat, Jul 20, 2019 at 12:28 PM Maxime Ripard > > > > > wrote: > > > > > > > > > > > > On Thu, Jul 11, 2019 at 07:43:16PM +0200, Michael Nazzareno Trimarchi wrote: > > > > > > > > > tcon-pixel clock is the rate that you want to achive on display side > > > > > > > > > and if you have 4 lanes 32bit or lanes and different bit number that > > > > > > > > > you need to have a clock that is able to put outside bits and speed > > > > > > > > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of > > > > > > > > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of > > > > > > > > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of > > > > > > > > > the display. > > > > > > > > > > > > > > > > So this is what the issue is then? > > > > > > > > > > > > > > > > This one does make sense, and you should just change the rate in the > > > > > > > > call to clk_set_rate in sun4i_tcon0_mode_set_cpu. > > > > > > > > > > > > > > > > I'm still wondering why that hasn't been brought up in either the > > > > > > > > discussion or the commit log before though. > > > > > > > > > > > > > > > Something like this? > > > > > > > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 20 +++++++++++--------- > > > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 -- > > > > > > > 2 files changed, 11 insertions(+), 11 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > index 64c43ee6bd92..42560d5c327c 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct > > > > > > > drm_display_mode *mode, > > > > > > > } > > > > > > > > > > > > > > static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > > > > > > > - const struct drm_display_mode *mode) > > > > > > > + const struct drm_display_mode *mode, > > > > > > > + u32 tcon_mul) > > > > > > > { > > > > > > > /* Configure the dot clock */ > > > > > > > - clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); > > > > > > > + clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000); > > > > > > > > > > > > > > /* Set the resolution */ > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, > > > > > > > @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format); > > > > > > > u8 lanes = device->lanes; > > > > > > > u32 block_space, start_delay; > > > > > > > - u32 tcon_div; > > > > > > > + u32 tcon_div, tcon_mul; > > > > > > > > > > > > > > - tcon->dclk_min_div = SUN6I_DSI_TCON_DIV; > > > > > > > - tcon->dclk_max_div = SUN6I_DSI_TCON_DIV; > > > > > > > + tcon->dclk_min_div = 4; > > > > > > > + tcon->dclk_max_div = 127; > > > > > > > > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + tcon_mul = bpp / lanes; > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > */ > > > > > > > regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div); > > > > > > > tcon_div &= GENMASK(6, 0); > > > > > > > - block_space = mode->htotal * bpp / (tcon_div * lanes); > > > > > > > + block_space = mode->htotal * tcon_div * tcon_mul; > > > > > > > block_space -= mode->hdisplay + 40; > > > > > > > > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG, > > > > > > > @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 7; > > > > > > > tcon->dclk_max_div = 7; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 6; > > > > > > > tcon->dclk_max_div = 127; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, connector); > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > index 5c3ad5be0690..a07090579f84 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > @@ -13,8 +13,6 @@ > > > > > > > #include > > > > > > > #include > > > > > > > > > > > > > > -#define SUN6I_DSI_TCON_DIV 4 > > > > > > > - > > > > > > > struct sun6i_dsi { > > > > > > > struct drm_connector connector; > > > > > > > struct drm_encoder encoder; > > > > > > > > > > > > I had more something like this in mind: > > > > > > http://code.bulix.org/nlp5a4-803511 > > > > > > > > > > Worth to look at it. was it working on your panel? meanwhile I will check it. > > > > > > > > I haven't tested it. > > > > > > > > > We have updated with below change [1], seems working on but is > > > > > actually checking the each divider as before start with 4... till 127. > > > > > > > > > > This new approach, is start looking the best divider from 4.. based on > > > > > the idea vs rounded it will ended up best divider like [2] > > > > > > > > But why? > > > > > > > > I mean, it's not like it's the first time I'm asking this... > > > > > > > > If the issue is what Micheal described, then the divider has nothing > > > > to do with it. We've had that discussion over and over again. > > > > > > This is what Michael is mentioned in above mail "tcon-pixel clock is > > > the rate that you want to achive on display side and if you have 4 > > > lanes 32bit or lanes and different bit number that you need to have > > > a clock that is able to put outside bits and speed equal to > > > pixel-clock * bits / lanes. so If you want a pixel-clock of 40 mhz > > > and you have 32bits and 4 lanes you need to have a clock of 40 * 32 > > > / 4 in no-burst mode. " > > > > Yeah, so we need to change the clock rate. > > > > > He is trying to manage the bpp/lanes into dclk_mul (in last mail) > > > and it can multiply with pixel clock which is rate argument in > > > sun4i_dclk_round_rate. > > > > > > The solution I have mentioned in dclk_min, max is bpp/lanes also > > > multiple rate in dotclock sun4i_dclk_round_rate. > > > > > > In both cases the overall pll_rate depends on dividers, the one that I > > > have on this patch is based on BSP and the Michael one is more generic > > > way so-that it can not to touch other functionalities and looping > > > dividers to find the best one. > > > > > > If dclk_min/max is bpp/lanes then dotclock directly using divider 6 > > > (assuming 24-bit and 4 lanes) and return the pll_rate and divider 6 > > > associated. > > > > > > if dclk_mul is bpp/lanes, on Michael new change, the dividers start > > > with 4 and end with 127 but the constant ideal rate which rate * > > > bpp/lanes but the loop from sun4i_dclk_round_rate computed the divider > > > as 6 only, ie what I'm mentioned on the above mail. > > > > We've been over this a couple of times already. > > > > The clock is generated like this: > > > > PLL -> TCON Module Clock -> TCON DCLK > > > > You want the TCON DCLK to be at the pixel clock rate * bpp / > > lanes. Fine, that makes sense. > > > > Except that the patch you've sent, instead of changing the rate > > itself, changes the ratio between the module clock and DCLK. > > > > And this is where the issue lies. First, from a logical viewpoint, it > > doesn't make sense. If you want to change the clock rate, then just do > > it. Don't hack around the multipliers trying to fall back to something > > that works for you. > > > > Then, the ratio itself needs to be set to 4. This is the part that > > we've discussed way too many times already, but in the Allwinner BSP, > > that ratio is hardcoded to 4, and we've had panels that need it at > > that value. > > > > So, what you want to do is to have: > > > > TCON DCLK = pixel clock * bpp / lanes > > TCON Module Clock = DCLK * 4 > > PLL = Module Clock * Module Clock Divider (which I believe is 1 in most cases) > > pll-mipi 1 1 1 178200000 > 0 0 50000 > tcon0 2 2 1 178200000 > 0 0 50000 > tcon-pixel-clock 1 1 1 29700000 > 0 0 50000 > > This is an english problem from my side: > tcon-pixel-clock is DCLK > tcon0 must be tcon-pixel-clock * bpp / lanes because the logic need to > put a bit every cycle. > > One solution can be: > - set_rate_exclusive to tcon0 and calculate as display pixel clock * > bpp / lanes > - calculate the tcon-pixel-clock using all divider > > Problem is that the function that calculate tcon-pixel-clock does not > have any constrain on the ideal value. What you are > suggesting is not correct in my opinion or I'm not following your > suggesstion. What I know is that if we have a pixel-clock > of dvi display of 50Mhz and we have 4 lanes 32bit we need a clock in > the logic of 400Mhz (this is the ideal throughtput). > So tcon-pixel-clock is 50mhz and tcon0 is 400Mhz. > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 94f24c5e2dc5..ffb7906054e5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -338,8 +338,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon, u32 block_space, start_delay; u32 tcon_div; - tcon->dclk_min_div = bpp/lanes; - tcon->dclk_max_div = bpp/lanes; + tcon->dclk_min_div = 4; + tcon->dclk_max_div = 127; + clk_set_rate_exclusive(tcon->sclk0, mode->crtc_clock * 1000 * bpp / lanes); sun4i_tcon0_mode_set_common(tcon, mode); Something like this on top of jagan proposal Michael > Michael > > > > > > So you want to increase the PLL. Fortunately for use, this is exactly > > what a call to clk_set_rate will end up doing. > > > > Maxime > > > > -- > > Maxime Ripard, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > > > -- > | Michael Nazzareno Trimarchi Amarula Solutions BV | > | COO - Founder Cruquiuskade 47 | > | +31(0)851119172 Amsterdam 1018 AM NL | > | [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 74C4CC433FF for ; Fri, 2 Aug 2019 08:39:09 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4927F2184E for ; Fri, 2 Aug 2019 08:39:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="oCqs0qHk"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=amarulasolutions.com header.i=@amarulasolutions.com header.b="lDaGPq2a" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4927F2184E Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amarulasolutions.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:To:Subject:Message-ID:Date:From: In-Reply-To:References:MIME-Version:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=f8QRBGwo1zfNX97uEbYBojxVkfq4ORDouEHCcRd0czw=; b=oCqs0qHkP0fvGw 7r2MFfcsNfXSwGydPxRW0mkpcXDP4TPZEkh4TNnRthUY35YyROrzzOtfAD/A4noaByA5aAJzTLHm8 n0yJRfZ8ES4Gqr8mb2qRCUXmaEYFH1HbghEiE50Vs7h4AciHjpyxmrQEmTLRXNmoJOKzf8Efhuu9a xHQP0fN9dZ3CP/VBZfgpVJDktx58PWnOUmK0XEFCqoOHFd0SYbBZu8GJ2j1Lf/SYPBkLuSM2192uW opal066eB0LS47JRzQHwL9pV68Fh/qkgVpTCcOyWYwQ19zjmU55bsXK/WDzvKsLLL4m9F7412p9lN kpgrkaep3Zw47CSLr7sA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1htT5X-0006Fc-DP; Fri, 02 Aug 2019 08:38:59 +0000 Received: from mail-wr1-x444.google.com ([2a00:1450:4864:20::444]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1htT5T-0006EF-1m for linux-arm-kernel@lists.infradead.org; Fri, 02 Aug 2019 08:38:57 +0000 Received: by mail-wr1-x444.google.com with SMTP id f9so76260258wre.12 for ; Fri, 02 Aug 2019 01:38:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=+iXBn34HynqrHicAiwBa6v98yy2VQgCDtn1EBQNd1fE=; b=lDaGPq2aIDC3X6y0L4RlVBc9UtQzyaCH7c4RyIw4+kQ3CeROdzOd1ALnm+8Wl2ImMA LuUoWqB6hawiSQ9+28zvk1/4aytgqVeQ+EoFGVzlp8oshTK6P7s2EkVP2w2DpC8YLTGJ tHvwNjgv8Hq0QI2QRsLR/tMidQ7KiCYfzNx5A= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=+iXBn34HynqrHicAiwBa6v98yy2VQgCDtn1EBQNd1fE=; b=tj9m9eOUjIT1R1muR0qqdg6v5vg+qbsGz4JCjvrru2dezPgKlv9TBzeXhY6d0Cqoyx Sj0VgWAQ1elhuxUZIBKH4OrXB+wFlZ0M38fTSqm9M5MpM9zaWSFty1A3ZyfctSlJmG0f +rarUQw4w1XL10ILHIVAIjfhba0FDZMJiW0/cXM7rKfDI3TlPn3lb54fPf6+qynTWUhB w0vh3PAniSmrNW8iAgBtGZBlhBguuO7+Y0fgrbxJKnOCAS2MoTQxXQKwGty9sPMmlNNF Hzl0p74dX/0NsfvwTS90nq0pkazkwNa7amtLo0zxcVw7UDiW7si3zfs3qa3LLQAhoBDO ZxSQ== X-Gm-Message-State: APjAAAX/TZKjkyGJ3jT7d/OOcUiDcVbMFmqXh+nb+i+SlKAQB8rxrtLt 8Mhgai0ewS7kB3zTYELaq0RjXQ3ZG1jvVj7BcNwCpw== X-Google-Smtp-Source: APXvYqzPTfFfr4+PBZpi0wN6zYi3eiaD5NksRlFCZ759oq+VHHsiaYTeww6nlG/OMMGpLv/2X6CZWqDhh6i4/Dk99e4= X-Received: by 2002:adf:f050:: with SMTP id t16mr137018637wro.99.1564735132710; Fri, 02 Aug 2019 01:38:52 -0700 (PDT) MIME-Version: 1.0 References: <20190625144930.5hegt6bkzqzykjid@flea> <20190703114933.u3x4ej3v7ocewvif@flea> <20190711100100.cty3s6rs3w27low6@flea> <20190720065830.zn3txpyduakywcva@flea> <20190720093202.6fn6xmhvsgawscnu@flea> <20190724090513.vqnlmya3nqkl6pmu@flea> In-Reply-To: From: Michael Nazzareno Trimarchi Date: Fri, 2 Aug 2019 10:38:40 +0200 Message-ID: Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI To: Maxime Ripard X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190802_013855_531020_165550E1 X-CRM114-Status: GOOD ( 49.11 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , devicetree , David Airlie , Michael Turquette , linux-sunxi , linux-kernel , dri-devel , Chen-Yu Tsai , Rob Herring , Jagan Teki , Daniel Vetter , linux-amarula , linux-clk , linux-arm-kernel Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Maxime On Mon, Jul 29, 2019 at 8:59 AM Michael Nazzareno Trimarchi wrote: > > Hi > > On Wed, Jul 24, 2019 at 11:05 AM Maxime Ripard > wrote: > > > > On Mon, Jul 22, 2019 at 03:51:04PM +0530, Jagan Teki wrote: > > > Hi Maxime, > > > > > > On Sat, Jul 20, 2019 at 3:02 PM Maxime Ripard wrote: > > > > > > > > On Sat, Jul 20, 2019 at 12:46:27PM +0530, Jagan Teki wrote: > > > > > On Sat, Jul 20, 2019 at 12:28 PM Maxime Ripard > > > > > wrote: > > > > > > > > > > > > On Thu, Jul 11, 2019 at 07:43:16PM +0200, Michael Nazzareno Trimarchi wrote: > > > > > > > > > tcon-pixel clock is the rate that you want to achive on display side > > > > > > > > > and if you have 4 lanes 32bit or lanes and different bit number that > > > > > > > > > you need to have a clock that is able to put outside bits and speed > > > > > > > > > equal to pixel-clock * bits / lanes. so If you want a pixel-clock of > > > > > > > > > 40 mhz and you have 32bits and 4 lanes you need to have a clock of > > > > > > > > > 40 * 32 / 4 in no-burst mode. I think that this is done but most of > > > > > > > > > the display. > > > > > > > > > > > > > > > > So this is what the issue is then? > > > > > > > > > > > > > > > > This one does make sense, and you should just change the rate in the > > > > > > > > call to clk_set_rate in sun4i_tcon0_mode_set_cpu. > > > > > > > > > > > > > > > > I'm still wondering why that hasn't been brought up in either the > > > > > > > > discussion or the commit log before though. > > > > > > > > > > > > > > > Something like this? > > > > > > > > > > > > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 20 +++++++++++--------- > > > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 -- > > > > > > > 2 files changed, 11 insertions(+), 11 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > index 64c43ee6bd92..42560d5c327c 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > > > > > > > @@ -263,10 +263,11 @@ static int sun4i_tcon_get_clk_delay(const struct > > > > > > > drm_display_mode *mode, > > > > > > > } > > > > > > > > > > > > > > static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > > > > > > > - const struct drm_display_mode *mode) > > > > > > > + const struct drm_display_mode *mode, > > > > > > > + u32 tcon_mul) > > > > > > > { > > > > > > > /* Configure the dot clock */ > > > > > > > - clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); > > > > > > > + clk_set_rate(tcon->dclk, mode->crtc_clock * tcon_mul * 1000); > > > > > > > > > > > > > > /* Set the resolution */ > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, > > > > > > > @@ -335,12 +336,13 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format); > > > > > > > u8 lanes = device->lanes; > > > > > > > u32 block_space, start_delay; > > > > > > > - u32 tcon_div; > > > > > > > + u32 tcon_div, tcon_mul; > > > > > > > > > > > > > > - tcon->dclk_min_div = SUN6I_DSI_TCON_DIV; > > > > > > > - tcon->dclk_max_div = SUN6I_DSI_TCON_DIV; > > > > > > > + tcon->dclk_min_div = 4; > > > > > > > + tcon->dclk_max_div = 127; > > > > > > > > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + tcon_mul = bpp / lanes; > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, tcon_mul); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -366,7 +368,7 @@ static void sun4i_tcon0_mode_set_cpu(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > */ > > > > > > > regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div); > > > > > > > tcon_div &= GENMASK(6, 0); > > > > > > > - block_space = mode->htotal * bpp / (tcon_div * lanes); > > > > > > > + block_space = mode->htotal * tcon_div * tcon_mul; > > > > > > > block_space -= mode->hdisplay + 40; > > > > > > > > > > > > > > regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG, > > > > > > > @@ -408,7 +410,7 @@ static void sun4i_tcon0_mode_set_lvds(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 7; > > > > > > > tcon->dclk_max_div = 7; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder)); > > > > > > > @@ -487,7 +489,7 @@ static void sun4i_tcon0_mode_set_rgb(struct > > > > > > > sun4i_tcon *tcon, > > > > > > > > > > > > > > tcon->dclk_min_div = 6; > > > > > > > tcon->dclk_max_div = 127; > > > > > > > - sun4i_tcon0_mode_set_common(tcon, mode); > > > > > > > + sun4i_tcon0_mode_set_common(tcon, mode, 1); > > > > > > > > > > > > > > /* Set dithering if needed */ > > > > > > > sun4i_tcon0_mode_set_dithering(tcon, connector); > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > index 5c3ad5be0690..a07090579f84 100644 > > > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > > > > > @@ -13,8 +13,6 @@ > > > > > > > #include > > > > > > > #include > > > > > > > > > > > > > > -#define SUN6I_DSI_TCON_DIV 4 > > > > > > > - > > > > > > > struct sun6i_dsi { > > > > > > > struct drm_connector connector; > > > > > > > struct drm_encoder encoder; > > > > > > > > > > > > I had more something like this in mind: > > > > > > http://code.bulix.org/nlp5a4-803511 > > > > > > > > > > Worth to look at it. was it working on your panel? meanwhile I will check it. > > > > > > > > I haven't tested it. > > > > > > > > > We have updated with below change [1], seems working on but is > > > > > actually checking the each divider as before start with 4... till 127. > > > > > > > > > > This new approach, is start looking the best divider from 4.. based on > > > > > the idea vs rounded it will ended up best divider like [2] > > > > > > > > But why? > > > > > > > > I mean, it's not like it's the first time I'm asking this... > > > > > > > > If the issue is what Micheal described, then the divider has nothing > > > > to do with it. We've had that discussion over and over again. > > > > > > This is what Michael is mentioned in above mail "tcon-pixel clock is > > > the rate that you want to achive on display side and if you have 4 > > > lanes 32bit or lanes and different bit number that you need to have > > > a clock that is able to put outside bits and speed equal to > > > pixel-clock * bits / lanes. so If you want a pixel-clock of 40 mhz > > > and you have 32bits and 4 lanes you need to have a clock of 40 * 32 > > > / 4 in no-burst mode. " > > > > Yeah, so we need to change the clock rate. > > > > > He is trying to manage the bpp/lanes into dclk_mul (in last mail) > > > and it can multiply with pixel clock which is rate argument in > > > sun4i_dclk_round_rate. > > > > > > The solution I have mentioned in dclk_min, max is bpp/lanes also > > > multiple rate in dotclock sun4i_dclk_round_rate. > > > > > > In both cases the overall pll_rate depends on dividers, the one that I > > > have on this patch is based on BSP and the Michael one is more generic > > > way so-that it can not to touch other functionalities and looping > > > dividers to find the best one. > > > > > > If dclk_min/max is bpp/lanes then dotclock directly using divider 6 > > > (assuming 24-bit and 4 lanes) and return the pll_rate and divider 6 > > > associated. > > > > > > if dclk_mul is bpp/lanes, on Michael new change, the dividers start > > > with 4 and end with 127 but the constant ideal rate which rate * > > > bpp/lanes but the loop from sun4i_dclk_round_rate computed the divider > > > as 6 only, ie what I'm mentioned on the above mail. > > > > We've been over this a couple of times already. > > > > The clock is generated like this: > > > > PLL -> TCON Module Clock -> TCON DCLK > > > > You want the TCON DCLK to be at the pixel clock rate * bpp / > > lanes. Fine, that makes sense. > > > > Except that the patch you've sent, instead of changing the rate > > itself, changes the ratio between the module clock and DCLK. > > > > And this is where the issue lies. First, from a logical viewpoint, it > > doesn't make sense. If you want to change the clock rate, then just do > > it. Don't hack around the multipliers trying to fall back to something > > that works for you. > > > > Then, the ratio itself needs to be set to 4. This is the part that > > we've discussed way too many times already, but in the Allwinner BSP, > > that ratio is hardcoded to 4, and we've had panels that need it at > > that value. > > > > So, what you want to do is to have: > > > > TCON DCLK = pixel clock * bpp / lanes > > TCON Module Clock = DCLK * 4 > > PLL = Module Clock * Module Clock Divider (which I believe is 1 in most cases) > > pll-mipi 1 1 1 178200000 > 0 0 50000 > tcon0 2 2 1 178200000 > 0 0 50000 > tcon-pixel-clock 1 1 1 29700000 > 0 0 50000 > > This is an english problem from my side: > tcon-pixel-clock is DCLK > tcon0 must be tcon-pixel-clock * bpp / lanes because the logic need to > put a bit every cycle. > > One solution can be: > - set_rate_exclusive to tcon0 and calculate as display pixel clock * > bpp / lanes > - calculate the tcon-pixel-clock using all divider > > Problem is that the function that calculate tcon-pixel-clock does not > have any constrain on the ideal value. What you are > suggesting is not correct in my opinion or I'm not following your > suggesstion. What I know is that if we have a pixel-clock > of dvi display of 50Mhz and we have 4 lanes 32bit we need a clock in > the logic of 400Mhz (this is the ideal throughtput). > So tcon-pixel-clock is 50mhz and tcon0 is 400Mhz. > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 94f24c5e2dc5..ffb7906054e5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -338,8 +338,9 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon, u32 block_space, start_delay; u32 tcon_div; - tcon->dclk_min_div = bpp/lanes; - tcon->dclk_max_div = bpp/lanes; + tcon->dclk_min_div = 4; + tcon->dclk_max_div = 127; + clk_set_rate_exclusive(tcon->sclk0, mode->crtc_clock * 1000 * bpp / lanes); sun4i_tcon0_mode_set_common(tcon, mode); Something like this on top of jagan proposal Michael > Michael > > > > > > So you want to increase the PLL. Fortunately for use, this is exactly > > what a call to clk_set_rate will end up doing. > > > > Maxime > > > > -- > > Maxime Ripard, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > > > -- > | Michael Nazzareno Trimarchi Amarula Solutions BV | > | COO - Founder Cruquiuskade 47 | > | +31(0)851119172 Amsterdam 1018 AM NL | > | [`as] http://www.amarulasolutions.com | -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel