From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1041034AbdDUO2A (ORCPT ); Fri, 21 Apr 2017 10:28:00 -0400 Received: from mail-wr0-f195.google.com ([209.85.128.195]:35658 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1041017AbdDUO14 (ORCPT ); Fri, 21 Apr 2017 10:27:56 -0400 MIME-Version: 1.0 In-Reply-To: References: <20170306131442.GC6999@kuha.fi.intel.com> <696552a7-c36a-1d73-9517-543907e9da39@gmail.com> <20170308135853.GH6999@kuha.fi.intel.com> <68817c44-d880-581a-e9f5-12845b9215eb@gmail.com>

<20170419112323.GD24062@kuha.fi.intel.com> <20170419151401.GA14036@roeck-us.net> <20170420122417.GB4769@kuha.fi.intel.com> From: Rajaram R Date: Fri, 21 Apr 2017 19:57:52 +0530 Message-ID: Subject: Re: [PATCH v17 2/3] usb: USB Type-C connector class To: Badhri Jagan Sridharan Cc: Heikki Krogerus , Guenter Roeck , Oliver Neukum , Mats Karrman , Greg KH , Felipe Balbi , LKML , USB Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Apr 21, 2017 at 1:16 AM, Badhri Jagan Sridharan wrote: > Thanks for the responses :) > > So seems like we have a plan. > > In Type-C connector class the checks for TYPEC_PWR_MODE_PD > and pd_revision for both the port and the partner will be removed in > power_role_store and the data_role_store and will be delegated > to the low level drivers. It is important to remember what USB Type-C provide is mechanisms for "TRYing" to become a particular role and not guaranteeing. With what device combination do you fore see we could get the desired role with this change ? > > TCPM code will issue hard reset in tcpm_dr_set and tcpm_pr_set if > current_role is not same as the preferred_role. > > I am going to make changes in my local kernel code base to start > making the corresponding changes in userspace. > Should I post-back the local kernel changes or Heikki and Geunter > you are planning to upload them ? > > Thanks for the support !! > Badhri. > > On Thu, Apr 20, 2017 at 5:24 AM, Heikki Krogerus > wrote: >> On Wed, Apr 19, 2017 at 10:22:47AM -0700, Badhri Jagan Sridharan wrote: >>> On Wed, Apr 19, 2017 at 8:14 AM, Guenter Roeck wrote: >>> > On Wed, Apr 19, 2017 at 07:45:00AM -0700, Badhri Jagan Sridharan wrote: >>> >> On Wed, Apr 19, 2017 at 4:23 AM, Heikki Krogerus >>> >> wrote: >>> >> > Hi, >>> >> > >>> >> > On Tue, Apr 18, 2017 at 11:52:33AM -0700, Badhri Jagan Sridharan wrote: >>> >> >> Hi Heikki, >>> >> >> >>> >> >> I have a question regarding the preferred_role node. >>> >> >> >>> >> >> +What: /sys/class/typec//preferred_role >>> >> >> +Date: March 2017 >>> >> >> +Contact: Heikki Krogerus >>> >> >> +Description: >>> >> >> + The user space can notify the driver about the preferred role. >>> >> >> + It should be handled as enabling of Try.SRC or Try.SNK, as >>> >> >> + defined in USB Type-C specification, in the port drivers. By >>> >> >> + default the preferred role should come from the platform. >>> >> >> + >>> >> >> + Valid values: source, sink, none (to remove preference) >>> >> >> >>> >> >> What is the expected behavior when the userspace changes the >>> >> >> preferred_role node when the port is in connected state ? >>> >> >> >>> >> >> 1. the state machine re-resolves the port roles right away based on >>> >> >> the new state machine in place ? (or) >>> >> > >>> >> > No! There are separate attributes for sending role swap requests. >>> >> >>> >> Right. But, that might not be helpful in cases when PD is not implemented. >>> >> and Implementing PD is not mandatory according the spec :/ >>> >> >>> >> FYI quoting from the Type-C specification release(page 24), >>> >> role swaps are not limited to devices that only support PD. >>> >> >>> >> "Two independent set of mechanisms are defined to allow a USB Type-C >>> >> DRP to functionally swap power and data roles. When USB PD is >>> >> supported, power and data role swapping is performed as a subsequent >>> >> step following the initial connection process. For non-PD implementations, >>> >> power/data role swapping can optionally be dealt with as part of the initial >>> >> connection process." >>> >> >>> >> But, the current interface definition actually prevents current/data role >>> >> swaps for non-pd devices. >>> >> >>> >>> > This is correct for the attribute definition, but it is not implemented >>> > that way. Writing the attribute is only read-only for non-DRP ports. >>> >>> i.e. tcpm_dr_set/tcpm_pr_set at tcpm.c would return EINVAL when type >>> is not TYPEC_PORT_DRP, is that what you are referring to ? >>> >>> if (port->typec_caps.type != TYPEC_PORT_DRP) { >>> ret = -EINVAL; >>> goto port_unlock; >>> } >>> >>> I do agree that this is actually correct. I am referring to the case >>> where port is >>> dual-role-power and dual-role-data but NOT PD capable. >>> >>> > Given the standard, I would consider that to be intentional; it might >>> > make sense to update the description accordingly. >>> > >>> > How about implementing a mechanism in the dr_set and pr_set code in tcpm >>> > which would handle that situation ? Something along the line of >>> > >>> > if (!port->pd_capable && connected && current role != desired role) { >>> > reset_port(); >>> > goto done; >>> > } >>> >>> By "desired role" you are referring to preferred_role right ? >>> >>> If so yes, That's a good idea as well and it might work as long as >>> type-c connector >>> class allows the call to reach tcpm code :) But the current connector >>> class code does >>> not allow that because the power_role and data_role nodes are defined that way. >> >> Well, the data_role does not limit the requests from reaching the low >> level drivers, but.. >> >>> port->cap->pd_revision and the port->pwr_opmode check in the below code >>> stub have to removed/refactored to make current_role/data_role writes to >>> reach the tcpm code. >>> >>> +static ssize_t power_role_store(struct device *dev, >>> + struct device_attribute *attr, >>> + const char *buf, size_t size) >>> +{ >>> + struct typec_port *port = to_typec_port(dev); >>> + int ret = size; >>> + >>> + if (!port->cap->pd_revision) { >>> + dev_dbg(dev, "USB Power Delivery not supported\n"); >>> + return -EOPNOTSUPP; >>> + } >>> + >>> + if (!port->cap->pr_set) { >>> + dev_dbg(dev, "power role swapping not supported\n"); >>> + return -EOPNOTSUPP; >>> + } >>> + >>> + if (port->pwr_opmode != TYPEC_PWR_MODE_PD) { >>> + dev_dbg(dev, "partner unable to swap power role\n"); >>> + return -EIO; >>> + } >>> + >>> + ret = sysfs_match_string(typec_roles, buf); >>> + if (ret < 0) >>> + return ret; >>> + >>> + ret = port->cap->pr_set(port->cap, ret); >>> + if (ret) >>> + return ret; >>> + >>> + return size; >>> +} >> >> .. yes. The power_role_store() does indeed need to be refactored. The >> PD requirement should only be applied to Type-C spec versions < 1.2, >> or removed completely. I would be happy to leave the checks to the low >> level drivers. >> >> >> Thanks, >> >> -- >> heikki > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html