All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pravin Shelar <pshelar@ovn.org>
To: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>,
	ovs dev <dev@openvswitch.org>, Andy Zhou <azhou@ovn.org>
Subject: Re: [PATCH net-next v1 1/3] net: openvswitch: expand the meters number supported
Date: Wed, 1 Apr 2020 14:12:18 -0700	[thread overview]
Message-ID: <CAOrHB_AE11g1_giQwLq4B9U6yJ6awDE18iDvg15PtZDbQ3h5yg@mail.gmail.com> (raw)
In-Reply-To: <CAMDZJNWHaQ_fYPdjC0hhQZbr_vXReDXeA5TgFNHy8SG79SzU1g@mail.gmail.com>

Ok, thanks.

On Wed, Apr 1, 2020 at 3:50 AM Tonghao Zhang <xiangxia.m.yue@gmail.com> wrote:
>
> On Tue, Mar 31, 2020 at 11:57 AM Pravin Shelar <pshelar@ovn.org> wrote:
> >
> > On Sun, Mar 29, 2020 at 5:35 PM Tonghao Zhang <xiangxia.m.yue@gmail.com> wrote:
> > >
> > > On Mon, Mar 30, 2020 at 12:46 AM Pravin Shelar <pshelar@ovn.org> wrote:
> > > >
> > > > On Sat, Mar 28, 2020 at 8:46 AM <xiangxia.m.yue@gmail.com> wrote:
> > > > >
> > > > > From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> > > > >
> > > > > In kernel datapath of Open vSwitch, there are only 1024
> > > > > buckets of meter in one dp. If installing more than 1024
> > > > > (e.g. 8192) meters, it may lead to the performance drop.
> > > > > But in some case, for example, Open vSwitch used as edge
> > > > > gateway, there should be 200,000+ at least, meters used for
> > > > > IP address bandwidth limitation.
> > > > >
> > > > > [Open vSwitch userspace datapath has this issue too.]
> > > > >
> > > > > For more scalable meter, this patch expands the buckets
> > > > > when necessary, so we can install more meters in the datapath.
> > > > >
> > > > > * Introducing the struct *dp_meter_instance*, it's easy to
> > > > >   expand meter though change the *ti* point in the struct
> > > > >   *dp_meter_table*.
> > > > > * Using kvmalloc_array instead of kmalloc_array.
> > > > >
> > > > Thanks for working on this, I have couple of comments.
> > > >
> > > > > Cc: Pravin B Shelar <pshelar@ovn.org>
> > > > > Cc: Andy Zhou <azhou@ovn.org>
> > > > > Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> > > > > ---
> > > > >  net/openvswitch/datapath.h |   2 +-
> > > > >  net/openvswitch/meter.c    | 168 ++++++++++++++++++++++++++++++-------
> > > > >  net/openvswitch/meter.h    |  17 +++-
> > > > >  3 files changed, 153 insertions(+), 34 deletions(-)
> > > > >
> > > > > diff --git a/net/openvswitch/datapath.h b/net/openvswitch/datapath.h
> > > > > index e239a46c2f94..785105578448 100644
> > > > > --- a/net/openvswitch/datapath.h
> > > > > +++ b/net/openvswitch/datapath.h
> > > > > @@ -82,7 +82,7 @@ struct datapath {
> > > > >         u32 max_headroom;
> > > > >
> > > > >         /* Switch meters. */
> > > > > -       struct hlist_head *meters;
> > > > > +       struct dp_meter_table *meters;
> > > > >  };
> > > > >
> > > > >  /**
> > > > > diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c
> > > > > index 5010d1ddd4bd..98003b201b45 100644
> > > > > --- a/net/openvswitch/meter.c
> > > > > +++ b/net/openvswitch/meter.c
> > > > > @@ -47,40 +47,136 @@ static void ovs_meter_free(struct dp_meter *meter)
> > > > >         kfree_rcu(meter, rcu);
> > > > >  }
> > > > >
> > > > > -static struct hlist_head *meter_hash_bucket(const struct datapath *dp,
> > > > > +static struct hlist_head *meter_hash_bucket(struct dp_meter_instance *ti,
> > > > >                                             u32 meter_id)
> > > > >  {
> > > > > -       return &dp->meters[meter_id & (METER_HASH_BUCKETS - 1)];
> > > > > +       u32 hash = jhash_1word(meter_id, ti->hash_seed);
> > > > > +
> > > > I do not see any need to hash meter-id, can you explain it.
> > > >
> > > > > +       return &ti->buckets[hash & (ti->n_buckets - 1)];
> > > > >  }
> > > > >
> > > > >  /* Call with ovs_mutex or RCU read lock. */
> > > > > -static struct dp_meter *lookup_meter(const struct datapath *dp,
> > > > > +static struct dp_meter *lookup_meter(const struct dp_meter_table *tbl,
> > > > >                                      u32 meter_id)
> > > > >  {
> > > > > +       struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
> > > > >         struct dp_meter *meter;
> > > > >         struct hlist_head *head;
> > > > >
> > > > > -       head = meter_hash_bucket(dp, meter_id);
> > > > > -       hlist_for_each_entry_rcu(meter, head, dp_hash_node,
> > > > > -                               lockdep_ovsl_is_held()) {
> > > > > +       head = meter_hash_bucket(ti, meter_id);
> > > > > +       hlist_for_each_entry_rcu(meter, head, hash_node[ti->node_ver],
> > > > > +                                lockdep_ovsl_is_held()) {
> > > > >                 if (meter->id == meter_id)
> > > > >                         return meter;
> > > > >         }
> > > > > +
> > > > This patch is expanding meter table linearly with number meters added
> > > > to datapath. so I do not see need to have hash table. it can be a
> > > > simple array. This would also improve lookup efficiency.
> > > > For hash collision we could find next free slot in array. let me know
> > > > what do you think about this approach.
> > > Hi Pravin
> > > If we use the simple array, when inserting the meter, for hash collision, we can
> > > find next free slot, but one case, when there are many meters in the array.
> > > we may find many slot for the free slot.
> > > And when we lookup the meter, for hash collision, we may find many
> > > array slots, and
> > > then find it, or that meter does not exist in the array, In that case,
> > > there may be a lookup performance
> > > drop.
> > >
> > I was thinking that users can insure that there are no hash collision,
> > but time complexity of negative case is expensive. so I am fine with
> > the hash table.
> Hi Pravi
> I check again the meter implementation of ovs, ovs-vswitchd use the id-pool to
> get a valid meter-id which passed to kernel, so there is no hash collision. You
> are right. we use the single array is the better solution.
> > > For hash meter-id in meter_hash_bucket, I am not 100% sure it is
> > > useful. it just update
> > > hash_seed when expand meters. For performance, we can remove it. Thanks.
> > ok.
> >
> > > > >         return NULL;
> > > > >  }
> > > > >
> > > > > -static void attach_meter(struct datapath *dp, struct dp_meter *meter)
> > > > > +static struct dp_meter_instance *dp_meter_instance_alloc(const int size)
> > > > > +{
> > > > > +       struct dp_meter_instance *ti;
> > > > > +       int i;
> > > > > +
> > > > > +       ti = kmalloc(sizeof(*ti), GFP_KERNEL);
> > > > > +       if (!ti)
> > > > > +               return NULL;
> > > > > +
> > > > > +       ti->buckets = kvmalloc_array(size, sizeof(struct hlist_head),
> > > > > +                                    GFP_KERNEL);
> > > > > +       if (!ti->buckets) {
> > > > > +               kfree(ti);
> > > > > +               return NULL;
> > > > > +       }
> > > > > +
> > > > > +       for (i = 0; i < size; i++)
> > > > > +               INIT_HLIST_HEAD(&ti->buckets[i]);
> > > > > +
> > > > > +       ti->n_buckets = size;
> > > > > +       ti->node_ver = 0;
> > > > > +       get_random_bytes(&ti->hash_seed, sizeof(u32));
> > > > > +
> > > > > +       return ti;
> > > > > +}
> > > > > +
> > > > > +static void dp_meter_instance_free_rcu(struct rcu_head *rcu)
> > > > >  {
> > > > > -       struct hlist_head *head = meter_hash_bucket(dp, meter->id);
> > > > > +       struct dp_meter_instance *ti;
> > > > >
> > > > > -       hlist_add_head_rcu(&meter->dp_hash_node, head);
> > > > > +       ti = container_of(rcu, struct dp_meter_instance, rcu);
> > > > > +       kvfree(ti->buckets);
> > > > > +       kfree(ti);
> > > > >  }
> > > > >
> > > > > -static void detach_meter(struct dp_meter *meter)
> > > > > +static void dp_meter_instance_insert(struct dp_meter_instance *ti,
> > > > > +                                    struct dp_meter *meter)
> > > > > +{
> > > > > +       struct hlist_head *head = meter_hash_bucket(ti, meter->id);
> > > > > +
> > > > > +       hlist_add_head_rcu(&meter->hash_node[ti->node_ver], head);
> > > > > +}
> > > > > +
> > > > > +static void dp_meter_instance_remove(struct dp_meter_instance *ti,
> > > > > +                                    struct dp_meter *meter)
> > > > >  {
> > > > > +       hlist_del_rcu(&meter->hash_node[ti->node_ver]);
> > > > > +}
> > > > > +
> > > > > +static struct dp_meter_instance *
> > > > > +dp_meter_instance_expand(struct dp_meter_instance *ti)
> > > > > +{
> > > > > +       struct dp_meter_instance *new_ti;
> > > > > +       int i;
> > > > > +
> > > > > +       new_ti = dp_meter_instance_alloc(ti->n_buckets * 2);
> > > > > +       if (!new_ti)
> > > > > +               return NULL;
> > > > > +
> > > > > +       new_ti->node_ver = !ti->node_ver;
> > > > > +
> > > > > +       for (i = 0; i < ti->n_buckets; i++) {
> > > > > +               struct hlist_head *head = &ti->buckets[i];
> > > > > +               struct dp_meter *meter;
> > > > > +
> > > > > +               hlist_for_each_entry_rcu(meter, head, hash_node[ti->node_ver],
> > > > > +                                        lockdep_ovsl_is_held())
> > > > > +                       dp_meter_instance_insert(new_ti, meter);
> > > > > +       }
> > > > > +
> > > > > +       return new_ti;
> > > > > +}
> > > > > +
> > > > > +static void attach_meter(struct dp_meter_table *tbl, struct dp_meter *meter)
> > > > > +{
> > > > > +       struct dp_meter_instance *new_ti;
> > > > > +       struct dp_meter_instance *ti;
> > > > > +
> > > > > +       ti = rcu_dereference_ovsl(tbl->ti);
> > > > > +       dp_meter_instance_insert(ti, meter);
> > > > > +
> > > > > +       /* operate the counter safely, because called with ovs_lock. */
> > > > > +       tbl->count++;
> > > > > +
> > > > > +       if (tbl->count > ti->n_buckets) {
> > > > > +               new_ti = dp_meter_instance_expand(ti);
> > > > > +
> > > >
> > > >
> > > > > +               if (new_ti) {
> > > > > +                       rcu_assign_pointer(tbl->ti, new_ti);
> > > > > +                       call_rcu(&ti->rcu, dp_meter_instance_free_rcu);
> > > > > +               }
> > > > > +       }
> > > > > +}
> > > > > +
> > > > > +static void detach_meter(struct dp_meter_table *tbl, struct dp_meter *meter)
> > > > > +{
> > > > > +       struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
> > > > > +
> > > > >         ASSERT_OVSL();
> > > > > -       if (meter)
> > > > > -               hlist_del_rcu(&meter->dp_hash_node);
> > > > > +       if (meter) {
> > > > > +               /* operate the counter safely, because called with ovs_lock. */
> > > > > +               tbl->count--;
> > > > > +               dp_meter_instance_remove(ti, meter);
> > > > > +       }
> > > > >  }
> > > > >
> > > > >  static struct sk_buff *
> > > > > @@ -303,9 +399,9 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info)
> > > > >         meter_id = nla_get_u32(a[OVS_METER_ATTR_ID]);
> > > > >
> > > > >         /* Cannot fail after this. */
> > > > > -       old_meter = lookup_meter(dp, meter_id);
> > > > > -       detach_meter(old_meter);
> > > > > -       attach_meter(dp, meter);
> > > > > +       old_meter = lookup_meter(dp->meters, meter_id);
> > > > > +       detach_meter(dp->meters, old_meter);
> > > > > +       attach_meter(dp->meters, meter);
> > > > >         ovs_unlock();
> > > > >
> > > > >         /* Build response with the meter_id and stats from
> > > > > @@ -365,7 +461,7 @@ static int ovs_meter_cmd_get(struct sk_buff *skb, struct genl_info *info)
> > > > >         }
> > > > >
> > > > >         /* Locate meter, copy stats. */
> > > > > -       meter = lookup_meter(dp, meter_id);
> > > > > +       meter = lookup_meter(dp->meters, meter_id);
> > > > >         if (!meter) {
> > > > >                 err = -ENOENT;
> > > > >                 goto exit_unlock;
> > > > > @@ -416,13 +512,13 @@ static int ovs_meter_cmd_del(struct sk_buff *skb, struct genl_info *info)
> > > > >                 goto exit_unlock;
> > > > >         }
> > > > >
> > > > > -       old_meter = lookup_meter(dp, meter_id);
> > > > > +       old_meter = lookup_meter(dp->meters, meter_id);
> > > > >         if (old_meter) {
> > > > >                 spin_lock_bh(&old_meter->lock);
> > > > >                 err = ovs_meter_cmd_reply_stats(reply, meter_id, old_meter);
> > > > >                 WARN_ON(err);
> > > > >                 spin_unlock_bh(&old_meter->lock);
> > > > > -               detach_meter(old_meter);
> > > > > +               detach_meter(dp->meters, old_meter);
> > > > >         }
> > > > >         ovs_unlock();
> > > > >         ovs_meter_free(old_meter);
> > > > > @@ -452,7 +548,7 @@ bool ovs_meter_execute(struct datapath *dp, struct sk_buff *skb,
> > > > >         int i, band_exceeded_max = -1;
> > > > >         u32 band_exceeded_rate = 0;
> > > > >
> > > > > -       meter = lookup_meter(dp, meter_id);
> > > > > +       meter = lookup_meter(dp->meters, meter_id);
> > > > >         /* Do not drop the packet when there is no meter. */
> > > > >         if (!meter)
> > > > >                 return false;
> > > > > @@ -570,32 +666,44 @@ struct genl_family dp_meter_genl_family __ro_after_init = {
> > > > >
> > > > >  int ovs_meters_init(struct datapath *dp)
> > > > >  {
> > > > > -       int i;
> > > > > +       struct dp_meter_instance *ti;
> > > > > +       struct dp_meter_table *tbl;
> > > > >
> > > > > -       dp->meters = kmalloc_array(METER_HASH_BUCKETS,
> > > > > -                                  sizeof(struct hlist_head), GFP_KERNEL);
> > > > > +       tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
> > > > > +       if (!tbl)
> > > > > +               return -ENOMEM;
> > > > >
> > > > > -       if (!dp->meters)
> > > > > +       tbl->count = 0;
> > > > > +
> > > > > +       ti = dp_meter_instance_alloc(METER_HASH_BUCKETS);
> > > > > +       if (!ti) {
> > > > > +               kfree(tbl);
> > > > >                 return -ENOMEM;
> > > > > +       }
> > > > >
> > > > > -       for (i = 0; i < METER_HASH_BUCKETS; i++)
> > > > > -               INIT_HLIST_HEAD(&dp->meters[i]);
> > > > > +       rcu_assign_pointer(tbl->ti, ti);
> > > > > +       dp->meters = tbl;
> > > > >
> > > > >         return 0;
> > > > >  }
> > > > >
> > > > >  void ovs_meters_exit(struct datapath *dp)
> > > > >  {
> > > > > +       struct dp_meter_table *tbl = dp->meters;
> > > > > +       struct dp_meter_instance *ti = rcu_dereference_ovsl(tbl->ti);
> > > > >         int i;
> > > > >
> > > > > -       for (i = 0; i < METER_HASH_BUCKETS; i++) {
> > > > > -               struct hlist_head *head = &dp->meters[i];
> > > > > +       for (i = 0; i < ti->n_buckets; i++) {
> > > > > +               struct hlist_head *head = &ti->buckets[i];
> > > > >                 struct dp_meter *meter;
> > > > >                 struct hlist_node *n;
> > > > >
> > > > > -               hlist_for_each_entry_safe(meter, n, head, dp_hash_node)
> > > > > -                       kfree(meter);
> > > > > +               hlist_for_each_entry_safe(meter, n, head,
> > > > > +                                         hash_node[ti->node_ver])
> > > > > +                       ovs_meter_free(meter);
> > > > >         }
> > > > >
> > > > > -       kfree(dp->meters);
> > > > > +       kvfree(ti->buckets);
> > > > > +       kfree(ti);
> > > > > +       kfree(tbl);
> > > > >  }
> > > > > diff --git a/net/openvswitch/meter.h b/net/openvswitch/meter.h
> > > > > index f645913870bd..bc84796d7d4d 100644
> > > > > --- a/net/openvswitch/meter.h
> > > > > +++ b/net/openvswitch/meter.h
> > > > > @@ -30,9 +30,7 @@ struct dp_meter_band {
> > > > >  struct dp_meter {
> > > > >         spinlock_t lock;    /* Per meter lock */
> > > > >         struct rcu_head rcu;
> > > > > -       struct hlist_node dp_hash_node; /*Element in datapath->meters
> > > > > -                                        * hash table.
> > > > > -                                        */
> > > > > +       struct hlist_node hash_node[2];
> > > > >         u32 id;
> > > > >         u16 kbps:1, keep_stats:1;
> > > > >         u16 n_bands;
> > > > > @@ -42,6 +40,19 @@ struct dp_meter {
> > > > >         struct dp_meter_band bands[];
> > > > >  };
> > > > >
> > > > > +struct dp_meter_instance {
> > > > > +       struct hlist_head *buckets;
> > > > > +       struct rcu_head rcu;
> > > > > +       u32 n_buckets;
> > > > > +       u32 hash_seed;
> > > > > +       u8 node_ver;
> > > > > +};
> > > > > +
> > > > > +struct dp_meter_table {
> > > > > +       struct dp_meter_instance __rcu *ti;
> > > > > +       u32 count;
> > > > > +};
> > > > > +
> > > > >  extern struct genl_family dp_meter_genl_family;
> > > > >  int ovs_meters_init(struct datapath *dp);
> > > > >  void ovs_meters_exit(struct datapath *dp);
> > > > > --
> > > > > 2.23.0
> > > > >
> > >
> > >
> > >
> > > --
> > > Best regards, Tonghao
>
>
>
> --
> Best regards, Tonghao

  reply	other threads:[~2020-04-01 21:12 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-23 13:10 [PATCH net-next v1 1/3] net: openvswitch: expand the meters number supported xiangxia.m.yue
2020-03-23 13:10 ` [PATCH net-next v1 2/3] net: openvswitch: set max limitation to meters xiangxia.m.yue
2020-03-23 13:10 ` [PATCH net-next v1 3/3] net: openvswitch: remove the unnecessary check xiangxia.m.yue
2020-03-29 16:46 ` [PATCH net-next v1 1/3] net: openvswitch: expand the meters number supported Pravin Shelar
2020-03-30  0:34   ` Tonghao Zhang
2020-03-31  3:57     ` Pravin Shelar
2020-04-01 10:50       ` Tonghao Zhang
2020-04-01 21:12         ` Pravin Shelar [this message]
2020-04-08 15:09         ` [ovs-dev] " William Tu
2020-04-08 15:59           ` Tonghao Zhang
2020-04-08 16:01             ` Tonghao Zhang
2020-04-09 21:41             ` William Tu
2020-04-09 23:29               ` Tonghao Zhang
2020-04-11  8:14                 ` Pravin Shelar
2020-04-16 10:16 ` [PATCH net-next v2 0/5] expand meter tables and fix bug xiangxia.m.yue
2020-04-16 10:16   ` [PATCH net-next v2 1/5] net: openvswitch: expand the meters supported number xiangxia.m.yue
2020-04-19 17:29     ` Pravin Shelar
2020-04-20  0:23       ` Tonghao Zhang
2020-04-20 21:43         ` Pravin Shelar
2020-04-16 10:17   ` [PATCH net-next v2 2/5] net: openvswitch: set max limitation to meters xiangxia.m.yue
2020-04-19 17:30     ` Pravin Shelar
2020-04-20  0:28       ` Tonghao Zhang
2020-04-20 21:44         ` Pravin Shelar
2020-04-16 10:17   ` [PATCH net-next v2 3/5] net: openvswitch: remove the unnecessary check xiangxia.m.yue
2020-04-16 10:17   ` [PATCH net-next v2 4/5] net: openvswitch: make EINVAL return value more obvious xiangxia.m.yue
2020-04-16 10:17   ` [PATCH net-next v2 5/5] net: openvswitch: use u64 for meter bucket xiangxia.m.yue
2020-04-18 22:39   ` [PATCH net-next v2 0/5] expand meter tables and fix bug David Miller
2020-04-22 17:08 ` [PATCH net-next v3 " xiangxia.m.yue
2020-04-22 17:08   ` [PATCH net-next v3 1/5] net: openvswitch: expand the meters supported number xiangxia.m.yue
2020-04-23  3:54     ` Pravin Shelar
2020-04-22 17:08   ` [PATCH net-next v3 2/5] net: openvswitch: set max limitation to meters xiangxia.m.yue
2020-04-23  3:54     ` Pravin Shelar
2020-04-22 17:08   ` [PATCH net-next v3 3/5] net: openvswitch: remove the unnecessary check xiangxia.m.yue
2020-04-23  3:54     ` Pravin Shelar
2020-04-22 17:08   ` [PATCH net-next v3 4/5] net: openvswitch: make EINVAL return value more obvious xiangxia.m.yue
2020-04-23  3:54     ` Pravin Shelar
2020-04-22 17:09   ` [PATCH net-next v3 5/5] net: openvswitch: use u64 for meter bucket xiangxia.m.yue
2020-04-23  3:54     ` Pravin Shelar
2020-04-23 19:45   ` [PATCH net-next v3 0/5] expand meter tables and fix bug David Miller
2020-04-23 19:49     ` David Miller
2020-04-23 22:56       ` Tonghao Zhang
2020-04-24  0:08 ` [PATCH net-next v4 " xiangxia.m.yue
2020-04-24  0:08   ` [PATCH net-next v4 1/5] net: openvswitch: expand the meters supported number xiangxia.m.yue
2020-04-24  0:08   ` [PATCH net-next v4 2/5] net: openvswitch: set max limitation to meters xiangxia.m.yue
2020-04-24  0:08   ` [PATCH net-next v4 3/5] net: openvswitch: remove the unnecessary check xiangxia.m.yue
2020-04-24  0:08   ` [PATCH net-next v4 4/5] net: openvswitch: make EINVAL return value more obvious xiangxia.m.yue
2020-04-24  0:08   ` [PATCH net-next v4 5/5] net: openvswitch: use u64 for meter bucket xiangxia.m.yue
2020-04-24  1:29   ` [PATCH net-next v4 0/5] expand meter tables and fix bug David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAOrHB_AE11g1_giQwLq4B9U6yJ6awDE18iDvg15PtZDbQ3h5yg@mail.gmail.com \
    --to=pshelar@ovn.org \
    --cc=azhou@ovn.org \
    --cc=dev@openvswitch.org \
    --cc=netdev@vger.kernel.org \
    --cc=xiangxia.m.yue@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.