From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-vw0-f46.google.com ([209.85.212.46]:43944 "EHLO mail-vw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750781Ab1GYInX (ORCPT ); Mon, 25 Jul 2011 04:43:23 -0400 Received: by vws1 with SMTP id 1so2804170vws.19 for ; Mon, 25 Jul 2011 01:43:23 -0700 (PDT) MIME-Version: 1.0 Date: Mon, 25 Jul 2011 16:43:21 +0800 Message-ID: Subject: Parallel CMOS Image Sensor with UART Control Interface From: James To: linux-media@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-media-owner@vger.kernel.org List-ID: Dear all, Does anyone came across a v4l2 Linux Device Driver for an Image Sensor that uses Parallel CMOS H/V and can only be control by UART interface instead of the common I2C or SPI interface? A similar sensor is the STMicroelectronics VL5510 Image Sensor although it support all 3 types of control interface. (http://www.st.com/internet/automotive/product/178477.jsp) Most or all the drivers found I found under drivers/media/video uses the I2C or SPI interface instead I'm new to writing driver and need a reference v4l2 driver for this type of image sensor to work with OMAP3530 ISP port on Gumstix's Overo board. I just need a very simple v4l2 driver that can extract the image from the sensor and control over it via the UART control interface. Any help is very much appreciated. Thanks in adv. -- Regards, James