From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Bojan_Bui=C4=87?= Date: Thu, 21 Nov 2013 16:20:20 +0100 Subject: [U-Boot] (no subject) In-Reply-To: References: <528D649C.1030701@boundarydevices.com> <528DC59C.6020907@denx.de> <528E1B4E.7080706@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I found address of register HW_RTC_WATCHDOG_SET: 0x8005C054 I need write to that register value 0x054 ? Bojan 2013/11/21 Bojan Bui? > Sorry for many questions, but I work once with 8 bit ATmega 8 > microcontroler and nothing more :( > > In manual I found this : > > HW_RTC_WATCHDOG 0x050 > HW_RTC_WATCHDOG_SET 0x054 > HW_RTC_WATCHDOG_CLR 0x058 > HW_RTC_WATCHDOG_TOG 0x05C > > > and now I do not know which register i need setup to enable watchdog ? > 0x054? Which value i need write to that register ? > > Bojan > > > > 2013/11/21 Stefano Babic > >> On 21/11/2013 15:01, Bojan Bui? wrote: >> > Which register I need set up for hard. watchdog ? >> > >> >> Please read carefully Chapter 23 amn 23.8.6 in the User Manuaal, you >> will find answer to all your question. >> >> Best regards, >> Stefano Babic >> >> -- >> ===================================================================== >> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel >> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de >> ===================================================================== >> > > > > -- > Bojan Bui? > > > -- Bojan Bui?