From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?UTF-8?Q?Bojan_Bui=C4=87?= <bojan.buic@gmail.com>
Date: Thu, 21 Nov 2013 16:08:35 +0100
Subject: [U-Boot] (no subject)
In-Reply-To: <528E1B4E.7080706@denx.de>
References: <CAP8r_=BJdRNRisEgmFmPcGbyOtpta69DtveY6iFgOqdocDy+zg@mail.gmail.com>
	<528D649C.1030701@boundarydevices.com>
	<CAP8r_=CGeWBfWCQR+V-=dq24HsutPXku5ysJn9NGWS9OKmP3Vg@mail.gmail.com>
	<528DC59C.6020907@denx.de>
	<CAP8r_=Bj081t5P_2fJCgzoiqy2Q_6P0VtDqAVUAnyu17=iogBQ@mail.gmail.com>
	<528E1B4E.7080706@denx.de>
Message-ID: <CAP8r_=CXZPH0kiCk08A=RiLq8LvQwYz6qCUu7WkFnA9aZ_Hohw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Sorry for many questions, but I work once with 8 bit ATmega 8
microcontroler and nothing more :(

In manual I found this :

HW_RTC_WATCHDOG 0x050
HW_RTC_WATCHDOG_SET 0x054
HW_RTC_WATCHDOG_CLR 0x058
HW_RTC_WATCHDOG_TOG 0x05C


and now I do not know which register i need setup to enable watchdog ?
0x054? Which value i need write to that register ?

Bojan



2013/11/21 Stefano Babic <sbabic@denx.de>

> On 21/11/2013 15:01, Bojan Bui? wrote:
> > Which register I need set up for hard. watchdog ?
> >
>
> Please read carefully Chapter 23 amn 23.8.6 in the User Manuaal, you
> will find answer to all your question.
>
> Best regards,
> Stefano Babic
>
> --
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> =====================================================================
>



-- 
Bojan Bui?