sorry, format did not look fine, please use attachment. On Mon, Aug 14, 2017 at 11:24 AM, Wang Shilong wrote: > Hello Jan, > > We have tested your patches, in generally, it helped in our case. Noticed, > our test case is only one user with many process create/remove file. > > > 4.13.0-rc3 without any patches > no Quota -O quota' -O quota, project' > File Creation File Unlink File Creation File Unlink File Creation File Unlink > 0 93,068 296,028 86,860 285,131 85,199 189,653 > 1 79,501 280,921 91,079 277,349 186,279 170,982 > 2 79,932 299,750 90,246 274,457 133,922 191,677 > 3 80,146 297,525 86,416 272,160 192,354 198,869 > > 4.13.0-rc3/w Jan Kara patch > no Quota -O quota' -O quota, project' > File Creation File Unlink File Creation File Unlink File Creation File Unlink > 0 73,057 311,217 74,898 286,120 81,217 288,138 ops/per second > 1 78,872 312,471 76,470 277,033 77,014 288,057 > 2 79,170 291,440 76,174 283,525 73,686 283,526 > 3 79,941 309,168 78,493 277,331 78,751 281,377 > > 4.13.0-rc3/with https://patchwork.ozlabs.org/patch/799014/ > no Quota -O quota' -O quota, project' > File Creation File Unlink File Creation File Unlink File Creation File Unlink > 0 100,319 322,746 87,480 302,579 84,569 218,969 > 1 728,424 299,808 312,766 293,471 219,198 199,389 > 2 729,410 300,930 315,590 289,664 218,283 197,871 > 3 727,555 298,797 316,837 289,108 213,095 213,458 > > 4.13.0-rc3/w https://patchwork.ozlabs.org/patch/799014/ + Jan Kara patch > no Quota -O quota' -O quota, project' > File Creation File Unlink File Creation File Unlink File Creation File Unlink > 0 100,312 324,871 87,076 267,303 86,258 288,137 > 1 707,524 298,892 361,963 252,493 421,919 282,492 > 2 707,792 298,162 363,450 264,923 397,723 283,675 > 3 707,420 302,552 354,013 266,638 421,537 281,763 > > > In conclusion, your patches helped a lot for our testing, noticed, please ignored test0 running > for creation, the first time testing will loaded inode cache in memory, we used test1-3 to compare. > > With extra patch applied, your patches improved File creation(quota+project) 2X, File unlink > 1.5X. > > Thanks, > Shilong > > ________________________________________ > From: Jan Kara [jack@suse.cz] > Sent: Wednesday, August 09, 2017 0:06 > To: Wang Shilong > Cc: Jan Kara; Andrew Perepechko; Shuichi Ihara; Wang Shilong; Li Xi; Ext4 Developers List; linux-fsdevel@vger.kernel.org > Subject: Re: quota: dqio_mutex design > > Hi, > > On Thu 03-08-17 22:39:51, Wang Shilong wrote: >> Please send me patches, we could test and response you! > > So I finally have something which isn't obviously wrong (it survives basic > testing and gives me improvements for some workloads). I have pushed out > the patches to: > > git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs.git quota_scaling > > I'd be happy if you can share your results with my patches. I have not yet > figured out a safe way to reduce the contention on dq_lock during update of > on-disk structure when lot of processes bang single dquot. I have > experimental patch but it didn't bring any benefit in my testing - I'll > rebase it on top of other patches I have send it to you for some testing. > > Honza > >> On Thu, Aug 3, 2017 at 10:36 PM, Jan Kara wrote: >> > Hello! >> > >> > On Thu 03-08-17 19:31:04, Wang Shilong wrote: >> >> We DDN is investigating the same issue! >> >> >> >> Some comments comes: >> >> >> >> On Thu, Aug 3, 2017 at 1:52 AM, Andrew Perepechko wrote: >> >> >> On Tue 01-08-17 15:02:42, Jan Kara wrote: >> >> >> > Hi Andrew, >> >> >> > >> >> >> I've been experimenting with this today but this idea didn't bring any >> >> >> benefit in my testing. Was your setup with multiple users or a single user? >> >> >> Could you give some testing to my patches to see whether they bring some >> >> >> benefit to you? >> >> >> >> >> >> Honza >> >> > >> >> > Hi Jan! >> >> > >> >> > My setup was with a single user. Unfortunately, it may take some time before >> >> > I can try a patched kernel other than RHEL6 or RHEL7 with the same test, >> >> > we have a lot of dependencies on these kernels. >> >> > >> >> > The actual test we ran was mdtest. >> >> > >> >> > By the way, we had 15+% performance improvement in creates from the >> >> > change that was discussed earlier in this thread: >> >> > >> >> > EXT4_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) { >> >> > + if (test_bit(DQ_MOD_B, &dquot->dq_flags)) >> >> > + return 0; >> >> >> >> I don't think this is right, as far as i understand, journal quota need go >> >> together with quota space change update inside same transaction, this will >> >> break consistency if power off or RO happen. >> >> >> >> Here is some ideas that i have thought: >> >> >> >> 1) switch dqio_mutex to a read/write lock, especially, i think most of >> >> time journal quota updates is in-place update, that means we don't need >> >> change quota tree in memory, firstly try read lock, retry with write lock if >> >> there is real tree change. >> >> >> >> 2)another is similar idea of Andrew's walkaround, but we need make correct >> >> fix, maintain dirty list for per transaction, and gurantee quota updates are >> >> flushed when commit transaction, this might be complex, i am not very >> >> familiar with JBD2 codes. >> >> >> >> It will be really nice if we could fix this regression, as we see 20% performace >> >> regression. >> > >> > So I have couple of patches: >> > >> > 1) I convert dqio_mutex do rw semaphore and use it in exclusive mode only >> > when quota tree is going to change. We also use dq_lock to serialize writes >> > of dquot - you cannot have two writes happening in parallel as that could >> > result in stale data being on disk. This patch brings benefit when there >> > are multiple users - now they don't contend on common lock. It shows >> > advantage in my testing so I plan to merge these patches. When the >> > contention is on a structure for single user this change however doesn't >> > bring much (the performance change is in statistical noise in my testing). >> > >> > 2) I have patches to remove some contention on dq_list_lock by not using >> > dirty list for tracking dquots in ext4 (and thus avoid dq_list_lock >> > completely in quota modification path). This does not bring measurable >> > benefit in my testing even on ramdisk but lockstat data for dq_list_lock >> > looks much better after this - it seems lock contention just shifted to >> > dq_data_lock - I'll try to address that as well and see whether I'll be >> > able to measure some advantage. >> > >> > 3) I have patches to convert dquot dirty bit to sequence counter so that >> > in commit_dqblk() we can check whether dquot state we wanted to write is >> > already on disk. Note that this is different from Andrew's approach in that >> > we do wait for dquot to be actually written before returning. We just don't >> > repeat the write unnecessarily. However this didn't bring any measurable >> > benefit in my testing so unless I'll be able to confirm it benefits some >> > workloads I won't merge this change. >> > >> > If you can experiment with your workloads, I can send you patches. I'd be >> > keen on having some performance data from real setups... >> > >> > Honza >> > >> >> >> >> Thanks, >> >> Shilong >> >> >> >> > dquot_mark_dquot_dirty(dquot); >> >> > return ext4_write_dquot(dquot); >> >> > >> >> > The idea was that if we know that some thread is somewhere between >> >> > mark_dirty and clear_dirty, then we can avoid blocking on dqio_mutex, >> >> > since that thread will update the ondisk dquot for us. >> >> > >> > -- >> > Jan Kara >> > SUSE Labs, CR > -- > Jan Kara > SUSE Labs, CR