From mboxrd@z Thu Jan 1 00:00:00 1970 From: otavio.salvador@ossystems.com.br (Otavio Salvador) Date: Wed, 1 Nov 2017 10:47:29 -0200 Subject: [PATCH v2] ARM: dts: imx7d-pico: Add Wifi support In-Reply-To: <1509539876.4068.2.camel@nxp.com> References: <1503056221-29183-1-git-send-email-vanessa.maegima@nxp.com> <1509539876.4068.2.camel@nxp.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Nov 1, 2017 at 10:38 AM, Vanessa Maegima wrote: > On Ter, 2017-10-31 at 16:11 -0200, Otavio Salvador wrote: >> On Fri, Aug 18, 2017 at 8:37 AM, Vanessa Maegima >> wrote: >> > >> > imx7d-pico has an ap6212 wifi chip connected to usdhc2 port. >> > >> > Add support for the usdhc2 port and to the WL_REG_ON regulator >> > so Wifi can be functional on this board. >> > >> > Signed-off-by: Vanessa Maegima >> It seems the name of the dtb is misleading ... this dtb refers mostly >> to the imx7d-pico-pi board no? >> > > Yes, this refers to the imx7d-pico-pi board. At the time I added this > support, I was not aware of the board variants as I had only the pico- > pi baseboard. I can work to separate this dts into SoM and baseboard > dts if you think this would be better, but I can only support pico-pi > as I do not have access to the other baseboards. Agreed, splitting it makes sense. I think we'd need to: - rename imx7d-pico.dts to imx7d-pico.dtsi - make a new imx7d-pico.dts to keep compatibility (Shawn is it need?) - try to make a imx7d-pico-pi.dts that includes imx7d-pico.dtsi and technexion-pico-pi.dtsi? It allows for adding the imx6ul-pico-pi and also split hobit baseboard as well. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750