* [PATCH v3] mmc: host: Enable compile testing of multiple drivers
@ 2020-09-07 10:52 Krzysztof Kozlowski
2020-09-07 12:17 ` Ulf Hansson
2020-09-08 13:53 ` Ulf Hansson
0 siblings, 2 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 10:52 UTC (permalink / raw)
To: Ulf Hansson, linux-mmc, linux-kernel; +Cc: Krzysztof Kozlowski
Multiple MMC host controller driver can be compile tested as they do not
depend on architecture specific headers.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v2:
1. Rebase.
Please expect conflicts around MMC_SDHCI_S3C with:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git/log/?h=next/soc-s3c-cleanup
Possible resolution:
-depends on PLAT_SAMSUNG || COMPILE_TEST
+depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
---
drivers/mmc/host/Kconfig | 40 +++++++++++++++++++++-------------------
1 file changed, 21 insertions(+), 19 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ddbed6f41c41..dc646359b4ff 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -178,7 +178,7 @@ config MMC_SDHCI_OF_AT91
config MMC_SDHCI_OF_ESDHC
tristate "SDHCI OF support for the Freescale eSDHC controller"
depends on MMC_SDHCI_PLTFM
- depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
+ depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
select MMC_SDHCI_IO_ACCESSORS
select FSL_GUTS
help
@@ -216,7 +216,7 @@ config MMC_SDHCI_OF_DWCMSHC
config MMC_SDHCI_OF_SPARX5
tristate "SDHCI OF support for the MCHP Sparx5 SoC"
depends on MMC_SDHCI_PLTFM
- depends on ARCH_SPARX5
+ depends on ARCH_SPARX5 || COMPILE_TEST
help
This selects the Secure Digital Host Controller Interface (SDHCI)
found in the MCHP Sparx5 SoC.
@@ -238,7 +238,7 @@ config MMC_SDHCI_CADENCE
config MMC_SDHCI_CNS3XXX
tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
- depends on ARCH_CNS3XXX
+ depends on ARCH_CNS3XXX || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
help
This selects the SDHCI support for CNS3xxx System-on-Chip devices.
@@ -262,7 +262,7 @@ config MMC_SDHCI_ESDHC_MCF
config MMC_SDHCI_ESDHC_IMX
tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
select MMC_CQHCI
@@ -276,7 +276,7 @@ config MMC_SDHCI_ESDHC_IMX
config MMC_SDHCI_DOVE
tristate "SDHCI support on Marvell's Dove SoC"
- depends on ARCH_DOVE || MACH_DOVE
+ depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -289,7 +289,7 @@ config MMC_SDHCI_DOVE
config MMC_SDHCI_TEGRA
tristate "SDHCI platform support for the Tegra SD/MMC Controller"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
select MMC_CQHCI
@@ -301,7 +301,8 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI
+ depends on PLAT_SAMSUNG || COMPILE_TEST
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
@@ -313,7 +314,7 @@ config MMC_SDHCI_S3C
config MMC_SDHCI_SIRF
tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
- depends on ARCH_SIRF
+ depends on ARCH_SIRF || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -351,7 +352,8 @@ config MMC_SDHCI_PXAV2
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
- depends on MMC_SDHCI && PLAT_SPEAR
+ depends on MMC_SDHCI
+ depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
This selects the Secure Digital Host Controller Interface (SDHCI)
@@ -374,7 +376,7 @@ config MMC_SDHCI_S3C_DMA
config MMC_SDHCI_BCM_KONA
tristate "SDHCI support on Broadcom KONA platform"
- depends on ARCH_BCM_MOBILE
+ depends on ARCH_BCM_MOBILE || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
help
This selects the Broadcom Kona Secure Digital Host Controller
@@ -422,7 +424,7 @@ config MMC_SDHCI_IPROC
config MMC_MESON_GX
tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
- depends on ARCH_MESON
+ depends on ARCH_MESON|| COMPILE_TEST
help
This selects support for the Amlogic SD/MMC Host Controller
found on the S905/GX*/AXG family of SoCs. This controller is
@@ -458,7 +460,7 @@ config MMC_MESON_MX_SDIO
config MMC_MOXART
tristate "MOXART SD/MMC Host Controller support"
- depends on ARCH_MOXART
+ depends on ARCH_MOXART || COMPILE_TEST
help
This selects support for the MOXART SD/MMC Host Controller.
MOXA provides one multi-functional card reader which can
@@ -467,7 +469,7 @@ config MMC_MOXART
config MMC_SDHCI_ST
tristate "SDHCI support on STMicroelectronics SoC"
- depends on ARCH_STI || FSP2
+ depends on ARCH_STI || FSP2 || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -587,7 +589,7 @@ config MMC_TIFM_SD
config MMC_MVSDIO
tristate "Marvell MMC/SD/SDIO host driver"
- depends on PLAT_ORION
+ depends on PLAT_ORION || (COMPILE_TEST && ARM)
depends on OF
help
This selects the Marvell SDIO host driver.
@@ -599,7 +601,7 @@ config MMC_MVSDIO
config MMC_DAVINCI
tristate "TI DAVINCI Multimedia Card Interface support"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || COMPILE_TEST
help
This selects the TI DAVINCI Multimedia card Interface.
If you have an DAVINCI board with a Multimedia Card slot,
@@ -628,7 +630,7 @@ config MMC_SPI
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C24XX
+ depends on ARCH_S3C24XX || COMPILE_TEST
depends on S3C24XX_DMAC
help
This selects a driver for the MCI interface found in
@@ -681,7 +683,7 @@ config MMC_SDRICOH_CS
config MMC_SDHCI_SPRD
tristate "Spreadtrum SDIO host Controller"
- depends on ARCH_SPRD
+ depends on ARCH_SPRD || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
select MMC_HSQ
@@ -698,7 +700,7 @@ config MMC_TMIO_CORE
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO || MFD_ASIC3
+ depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
select MMC_TMIO_CORE
help
This provides support for the SD/MMC cell found in TC6393XB,
@@ -971,7 +973,7 @@ config MMC_REALTEK_USB
config MMC_SUNXI
tristate "Allwinner sunxi SD/MMC Host Controller support"
- depends on ARCH_SUNXI
+ depends on ARCH_SUNXI || COMPILE_TEST
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3] mmc: host: Enable compile testing of multiple drivers
2020-09-07 10:52 [PATCH v3] mmc: host: Enable compile testing of multiple drivers Krzysztof Kozlowski
@ 2020-09-07 12:17 ` Ulf Hansson
2020-09-08 13:53 ` Ulf Hansson
1 sibling, 0 replies; 5+ messages in thread
From: Ulf Hansson @ 2020-09-07 12:17 UTC (permalink / raw)
To: Krzysztof Kozlowski; +Cc: linux-mmc, Linux Kernel Mailing List
On Mon, 7 Sep 2020 at 12:53, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Multiple MMC host controller driver can be compile tested as they do not
> depend on architecture specific headers.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Applied for next, thanks!
>
> ---
>
> Changes since v2:
> 1. Rebase.
>
> Please expect conflicts around MMC_SDHCI_S3C with:
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git/log/?h=next/soc-s3c-cleanup
I see. Thanks for sharing. Looks like the fixup should be possible to
carry for Stephen in linux-next.
Kind regards
Uffe
>
> Possible resolution:
> -depends on PLAT_SAMSUNG || COMPILE_TEST
> +depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> ---
> drivers/mmc/host/Kconfig | 40 +++++++++++++++++++++-------------------
> 1 file changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index ddbed6f41c41..dc646359b4ff 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -178,7 +178,7 @@ config MMC_SDHCI_OF_AT91
> config MMC_SDHCI_OF_ESDHC
> tristate "SDHCI OF support for the Freescale eSDHC controller"
> depends on MMC_SDHCI_PLTFM
> - depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
> + depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
> select MMC_SDHCI_IO_ACCESSORS
> select FSL_GUTS
> help
> @@ -216,7 +216,7 @@ config MMC_SDHCI_OF_DWCMSHC
> config MMC_SDHCI_OF_SPARX5
> tristate "SDHCI OF support for the MCHP Sparx5 SoC"
> depends on MMC_SDHCI_PLTFM
> - depends on ARCH_SPARX5
> + depends on ARCH_SPARX5 || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> found in the MCHP Sparx5 SoC.
> @@ -238,7 +238,7 @@ config MMC_SDHCI_CADENCE
>
> config MMC_SDHCI_CNS3XXX
> tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
> - depends on ARCH_CNS3XXX
> + depends on ARCH_CNS3XXX || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> help
> This selects the SDHCI support for CNS3xxx System-on-Chip devices.
> @@ -262,7 +262,7 @@ config MMC_SDHCI_ESDHC_MCF
>
> config MMC_SDHCI_ESDHC_IMX
> tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
> - depends on ARCH_MXC
> + depends on ARCH_MXC || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_CQHCI
> @@ -276,7 +276,7 @@ config MMC_SDHCI_ESDHC_IMX
>
> config MMC_SDHCI_DOVE
> tristate "SDHCI support on Marvell's Dove SoC"
> - depends on ARCH_DOVE || MACH_DOVE
> + depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -289,7 +289,7 @@ config MMC_SDHCI_DOVE
>
> config MMC_SDHCI_TEGRA
> tristate "SDHCI platform support for the Tegra SD/MMC Controller"
> - depends on ARCH_TEGRA
> + depends on ARCH_TEGRA || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_CQHCI
> @@ -301,7 +301,8 @@ config MMC_SDHCI_TEGRA
>
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> - depends on MMC_SDHCI && PLAT_SAMSUNG
> + depends on MMC_SDHCI
> + depends on PLAT_SAMSUNG || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> often referrered to as the HSMMC block in some of the Samsung S3C
> @@ -313,7 +314,7 @@ config MMC_SDHCI_S3C
>
> config MMC_SDHCI_SIRF
> tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
> - depends on ARCH_SIRF
> + depends on ARCH_SIRF || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -351,7 +352,8 @@ config MMC_SDHCI_PXAV2
>
> config MMC_SDHCI_SPEAR
> tristate "SDHCI support on ST SPEAr platform"
> - depends on MMC_SDHCI && PLAT_SPEAR
> + depends on MMC_SDHCI
> + depends on PLAT_SPEAR || COMPILE_TEST
> depends on OF
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> @@ -374,7 +376,7 @@ config MMC_SDHCI_S3C_DMA
>
> config MMC_SDHCI_BCM_KONA
> tristate "SDHCI support on Broadcom KONA platform"
> - depends on ARCH_BCM_MOBILE
> + depends on ARCH_BCM_MOBILE || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> help
> This selects the Broadcom Kona Secure Digital Host Controller
> @@ -422,7 +424,7 @@ config MMC_SDHCI_IPROC
>
> config MMC_MESON_GX
> tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
> - depends on ARCH_MESON
> + depends on ARCH_MESON|| COMPILE_TEST
> help
> This selects support for the Amlogic SD/MMC Host Controller
> found on the S905/GX*/AXG family of SoCs. This controller is
> @@ -458,7 +460,7 @@ config MMC_MESON_MX_SDIO
>
> config MMC_MOXART
> tristate "MOXART SD/MMC Host Controller support"
> - depends on ARCH_MOXART
> + depends on ARCH_MOXART || COMPILE_TEST
> help
> This selects support for the MOXART SD/MMC Host Controller.
> MOXA provides one multi-functional card reader which can
> @@ -467,7 +469,7 @@ config MMC_MOXART
>
> config MMC_SDHCI_ST
> tristate "SDHCI support on STMicroelectronics SoC"
> - depends on ARCH_STI || FSP2
> + depends on ARCH_STI || FSP2 || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -587,7 +589,7 @@ config MMC_TIFM_SD
>
> config MMC_MVSDIO
> tristate "Marvell MMC/SD/SDIO host driver"
> - depends on PLAT_ORION
> + depends on PLAT_ORION || (COMPILE_TEST && ARM)
> depends on OF
> help
> This selects the Marvell SDIO host driver.
> @@ -599,7 +601,7 @@ config MMC_MVSDIO
>
> config MMC_DAVINCI
> tristate "TI DAVINCI Multimedia Card Interface support"
> - depends on ARCH_DAVINCI
> + depends on ARCH_DAVINCI || COMPILE_TEST
> help
> This selects the TI DAVINCI Multimedia card Interface.
> If you have an DAVINCI board with a Multimedia Card slot,
> @@ -628,7 +630,7 @@ config MMC_SPI
>
> config MMC_S3C
> tristate "Samsung S3C SD/MMC Card Interface support"
> - depends on ARCH_S3C24XX
> + depends on ARCH_S3C24XX || COMPILE_TEST
> depends on S3C24XX_DMAC
> help
> This selects a driver for the MCI interface found in
> @@ -681,7 +683,7 @@ config MMC_SDRICOH_CS
>
> config MMC_SDHCI_SPRD
> tristate "Spreadtrum SDIO host Controller"
> - depends on ARCH_SPRD
> + depends on ARCH_SPRD || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_HSQ
> @@ -698,7 +700,7 @@ config MMC_TMIO_CORE
>
> config MMC_TMIO
> tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
> - depends on MFD_TMIO || MFD_ASIC3
> + depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
> select MMC_TMIO_CORE
> help
> This provides support for the SD/MMC cell found in TC6393XB,
> @@ -971,7 +973,7 @@ config MMC_REALTEK_USB
>
> config MMC_SUNXI
> tristate "Allwinner sunxi SD/MMC Host Controller support"
> - depends on ARCH_SUNXI
> + depends on ARCH_SUNXI || COMPILE_TEST
> help
> This selects support for the SD/MMC Host Controller on
> Allwinner sunxi SoCs.
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3] mmc: host: Enable compile testing of multiple drivers
2020-09-07 10:52 [PATCH v3] mmc: host: Enable compile testing of multiple drivers Krzysztof Kozlowski
2020-09-07 12:17 ` Ulf Hansson
@ 2020-09-08 13:53 ` Ulf Hansson
2020-09-08 13:56 ` Krzysztof Kozlowski
1 sibling, 1 reply; 5+ messages in thread
From: Ulf Hansson @ 2020-09-08 13:53 UTC (permalink / raw)
To: Krzysztof Kozlowski; +Cc: linux-mmc, Linux Kernel Mailing List, Arnd Bergmann
+ Arnd
On Mon, 7 Sep 2020 at 12:53, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Multiple MMC host controller driver can be compile tested as they do not
> depend on architecture specific headers.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
It seems like this is causing build errors for my next branch when
running allmod config [1].
[...]
>
> config MMC_S3C
> tristate "Samsung S3C SD/MMC Card Interface support"
> - depends on ARCH_S3C24XX
> + depends on ARCH_S3C24XX || COMPILE_TEST
> depends on S3C24XX_DMAC
> help
> This selects a driver for the MCI interface found in
[...]
The problem doesn't exist in linux-next, since it has the
corresponding cleanup/rework patches for MMC_S3C from Arnd.
To fix the problem, we should probably remove COMPILE_TEST for
MMC_S3C, for now. Then we can add it again and send it as a fix for
v5.10-rc1.
What do you think?
Kind regards
Uffe
[1]
https://kernelci.org/build/id/5f57413db10918c9bad353a5/logs/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3] mmc: host: Enable compile testing of multiple drivers
2020-09-08 13:53 ` Ulf Hansson
@ 2020-09-08 13:56 ` Krzysztof Kozlowski
2020-09-08 14:04 ` Ulf Hansson
0 siblings, 1 reply; 5+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-08 13:56 UTC (permalink / raw)
To: Ulf Hansson; +Cc: linux-mmc, Linux Kernel Mailing List, Arnd Bergmann
On Tue, 8 Sep 2020 at 15:54, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> + Arnd
>
> On Mon, 7 Sep 2020 at 12:53, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> >
> > Multiple MMC host controller driver can be compile tested as they do not
> > depend on architecture specific headers.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> It seems like this is causing build errors for my next branch when
> running allmod config [1].
>
> [...]
>
> >
> > config MMC_S3C
> > tristate "Samsung S3C SD/MMC Card Interface support"
> > - depends on ARCH_S3C24XX
> > + depends on ARCH_S3C24XX || COMPILE_TEST
> > depends on S3C24XX_DMAC
> > help
> > This selects a driver for the MCI interface found in
>
> [...]
>
> The problem doesn't exist in linux-next, since it has the
> corresponding cleanup/rework patches for MMC_S3C from Arnd.
>
> To fix the problem, we should probably remove COMPILE_TEST for
> MMC_S3C, for now. Then we can add it again and send it as a fix for
> v5.10-rc1.
>
> What do you think?
Yes, better to remove it otherwise it will pop up when Linus merges
your tree. Do you want a patch for this or you fix it up by yourself?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3] mmc: host: Enable compile testing of multiple drivers
2020-09-08 13:56 ` Krzysztof Kozlowski
@ 2020-09-08 14:04 ` Ulf Hansson
0 siblings, 0 replies; 5+ messages in thread
From: Ulf Hansson @ 2020-09-08 14:04 UTC (permalink / raw)
To: Krzysztof Kozlowski; +Cc: linux-mmc, Linux Kernel Mailing List, Arnd Bergmann
On Tue, 8 Sep 2020 at 15:57, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, 8 Sep 2020 at 15:54, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > + Arnd
> >
> > On Mon, 7 Sep 2020 at 12:53, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > >
> > > Multiple MMC host controller driver can be compile tested as they do not
> > > depend on architecture specific headers.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >
> > It seems like this is causing build errors for my next branch when
> > running allmod config [1].
> >
> > [...]
> >
> > >
> > > config MMC_S3C
> > > tristate "Samsung S3C SD/MMC Card Interface support"
> > > - depends on ARCH_S3C24XX
> > > + depends on ARCH_S3C24XX || COMPILE_TEST
> > > depends on S3C24XX_DMAC
> > > help
> > > This selects a driver for the MCI interface found in
> >
> > [...]
> >
> > The problem doesn't exist in linux-next, since it has the
> > corresponding cleanup/rework patches for MMC_S3C from Arnd.
> >
> > To fix the problem, we should probably remove COMPILE_TEST for
> > MMC_S3C, for now. Then we can add it again and send it as a fix for
> > v5.10-rc1.
> >
> > What do you think?
>
> Yes, better to remove it otherwise it will pop up when Linus merges
> your tree. Do you want a patch for this or you fix it up by yourself?
I posted a patch, applying it on top. No worries.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-08 19:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-07 10:52 [PATCH v3] mmc: host: Enable compile testing of multiple drivers Krzysztof Kozlowski
2020-09-07 12:17 ` Ulf Hansson
2020-09-08 13:53 ` Ulf Hansson
2020-09-08 13:56 ` Krzysztof Kozlowski
2020-09-08 14:04 ` Ulf Hansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.