* [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-23 14:59 ` Jerome Brunet
0 siblings, 0 replies; 9+ messages in thread
From: Jerome Brunet @ 2019-05-23 14:59 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman
Cc: Jerome Brunet, linux-amlogic, linux-mmc, linux-kernel, Neil Armstrong
While cleaning the ISR of the meson-gx and acking only raised irqs,
the ack of the irq was moved at the very last stage of the function.
This was stable during the initial tests but it triggered issues with
hs200, under specific loads (like booting android). Acking the irqs
after calling the mmc_request_done() causes the problem.
Moving the ack back to the original place solves the issue. Since the
irq is edge triggered, it does not hurt to ack irq even earlier, so
let's do it early in the ISR.
Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 6ef465304052..cb3f6811d69a 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
if (WARN_ON(!host) || WARN_ON(!host->cmd))
return IRQ_NONE;
+ /* ack all raised interrupts */
+ writel(status, host->regs + SD_EMMC_STATUS);
+
cmd = host->cmd;
data = cmd->data;
cmd->error = 0;
@@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
if (ret == IRQ_HANDLED)
meson_mmc_request_done(host->mmc, cmd->mrq);
- /* ack all raised interrupts */
- writel(status, host->regs + SD_EMMC_STATUS);
-
return ret;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-23 14:59 ` Jerome Brunet
0 siblings, 0 replies; 9+ messages in thread
From: Jerome Brunet @ 2019-05-23 14:59 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman
Cc: linux-amlogic, Neil Armstrong, linux-mmc, linux-kernel, Jerome Brunet
While cleaning the ISR of the meson-gx and acking only raised irqs,
the ack of the irq was moved at the very last stage of the function.
This was stable during the initial tests but it triggered issues with
hs200, under specific loads (like booting android). Acking the irqs
after calling the mmc_request_done() causes the problem.
Moving the ack back to the original place solves the issue. Since the
irq is edge triggered, it does not hurt to ack irq even earlier, so
let's do it early in the ISR.
Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 6ef465304052..cb3f6811d69a 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
if (WARN_ON(!host) || WARN_ON(!host->cmd))
return IRQ_NONE;
+ /* ack all raised interrupts */
+ writel(status, host->regs + SD_EMMC_STATUS);
+
cmd = host->cmd;
data = cmd->data;
cmd->error = 0;
@@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
if (ret == IRQ_HANDLED)
meson_mmc_request_done(host->mmc, cmd->mrq);
- /* ack all raised interrupts */
- writel(status, host->regs + SD_EMMC_STATUS);
-
return ret;
}
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
2019-05-23 14:59 ` Jerome Brunet
(?)
@ 2019-05-23 15:47 ` Kevin Hilman
-1 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2019-05-23 15:47 UTC (permalink / raw)
To: Jerome Brunet, Ulf Hansson
Cc: Jerome Brunet, linux-amlogic, linux-mmc, linux-kernel, Neil Armstrong
Jerome Brunet <jbrunet@baylibre.com> writes:
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
And to be clear, this fix should go into v5.2-rc.
My Tested-by is already above, but just for the benefit of the
archives... tested this on mainline, and also on a v4.19 backport with
Android and it fixes issues see there.
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-23 15:47 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2019-05-23 15:47 UTC (permalink / raw)
To: Ulf Hansson
Cc: Jerome Brunet, linux-amlogic, linux-mmc, linux-kernel, Neil Armstrong
Jerome Brunet <jbrunet@baylibre.com> writes:
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
And to be clear, this fix should go into v5.2-rc.
My Tested-by is already above, but just for the benefit of the
archives... tested this on mainline, and also on a v4.19 backport with
Android and it fixes issues see there.
Kevin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-23 15:47 ` Kevin Hilman
0 siblings, 0 replies; 9+ messages in thread
From: Kevin Hilman @ 2019-05-23 15:47 UTC (permalink / raw)
To: Jerome Brunet, Ulf Hansson
Cc: linux-amlogic, Neil Armstrong, linux-mmc, linux-kernel, Jerome Brunet
Jerome Brunet <jbrunet@baylibre.com> writes:
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
And to be clear, this fix should go into v5.2-rc.
My Tested-by is already above, but just for the benefit of the
archives... tested this on mainline, and also on a v4.19 backport with
Android and it fixes issues see there.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
2019-05-23 14:59 ` Jerome Brunet
@ 2019-05-28 7:27 ` Brad Harper
-1 siblings, 0 replies; 9+ messages in thread
From: Brad Harper @ 2019-05-28 7:27 UTC (permalink / raw)
To: Jerome Brunet, Ulf Hansson, Kevin Hilman
Cc: linux-amlogic, Neil Armstrong, linux-mmc, linux-kernel
On 24/05/2019 12:59 am, Jerome Brunet wrote:
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 6ef465304052..cb3f6811d69a 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (WARN_ON(!host) || WARN_ON(!host->cmd))
> return IRQ_NONE;
>
> + /* ack all raised interrupts */
> + writel(status, host->regs + SD_EMMC_STATUS);
> +
> cmd = host->cmd;
> data = cmd->data;
> cmd->error = 0;
> @@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (ret == IRQ_HANDLED)
> meson_mmc_request_done(host->mmc, cmd->mrq);
>
> - /* ack all raised interrupts */
> - writel(status, host->regs + SD_EMMC_STATUS);
> -
> return ret;
> }
>
>
This patch resolves issues I was having with hung tasks waiting for emmc
& sd cards on the odroid N2.
Tested-by: Brad Harper <bjharper@gmail.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-28 7:27 ` Brad Harper
0 siblings, 0 replies; 9+ messages in thread
From: Brad Harper @ 2019-05-28 7:27 UTC (permalink / raw)
To: Jerome Brunet, Ulf Hansson, Kevin Hilman
Cc: linux-amlogic, linux-mmc, linux-kernel, Neil Armstrong
On 24/05/2019 12:59 am, Jerome Brunet wrote:
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 6ef465304052..cb3f6811d69a 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (WARN_ON(!host) || WARN_ON(!host->cmd))
> return IRQ_NONE;
>
> + /* ack all raised interrupts */
> + writel(status, host->regs + SD_EMMC_STATUS);
> +
> cmd = host->cmd;
> data = cmd->data;
> cmd->error = 0;
> @@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (ret == IRQ_HANDLED)
> meson_mmc_request_done(host->mmc, cmd->mrq);
>
> - /* ack all raised interrupts */
> - writel(status, host->regs + SD_EMMC_STATUS);
> -
> return ret;
> }
>
>
This patch resolves issues I was having with hung tasks waiting for emmc
& sd cards on the odroid N2.
Tested-by: Brad Harper <bjharper@gmail.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
2019-05-23 14:59 ` Jerome Brunet
@ 2019-05-28 8:53 ` Ulf Hansson
-1 siblings, 0 replies; 9+ messages in thread
From: Ulf Hansson @ 2019-05-28 8:53 UTC (permalink / raw)
To: Jerome Brunet
Cc: Kevin Hilman, open list:ARM/Amlogic Meson...,
linux-mmc, Linux Kernel Mailing List, Neil Armstrong
On Thu, 23 May 2019 at 16:59, Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Applied for fixes, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 6ef465304052..cb3f6811d69a 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (WARN_ON(!host) || WARN_ON(!host->cmd))
> return IRQ_NONE;
>
> + /* ack all raised interrupts */
> + writel(status, host->regs + SD_EMMC_STATUS);
> +
> cmd = host->cmd;
> data = cmd->data;
> cmd->error = 0;
> @@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (ret == IRQ_HANDLED)
> meson_mmc_request_done(host->mmc, cmd->mrq);
>
> - /* ack all raised interrupts */
> - writel(status, host->regs + SD_EMMC_STATUS);
> -
> return ret;
> }
>
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] mmc: meson-gx: fix irq ack
@ 2019-05-28 8:53 ` Ulf Hansson
0 siblings, 0 replies; 9+ messages in thread
From: Ulf Hansson @ 2019-05-28 8:53 UTC (permalink / raw)
To: Jerome Brunet
Cc: Kevin Hilman, Neil Armstrong, linux-mmc,
Linux Kernel Mailing List, open list:ARM/Amlogic Meson...
On Thu, 23 May 2019 at 16:59, Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> While cleaning the ISR of the meson-gx and acking only raised irqs,
> the ack of the irq was moved at the very last stage of the function.
>
> This was stable during the initial tests but it triggered issues with
> hs200, under specific loads (like booting android). Acking the irqs
> after calling the mmc_request_done() causes the problem.
>
> Moving the ack back to the original place solves the issue. Since the
> irq is edge triggered, it does not hurt to ack irq even earlier, so
> let's do it early in the ISR.
>
> Fixes: 9c5fdb07a28d ("mmc: meson-gx: ack only raised irq")
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Applied for fixes, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 6ef465304052..cb3f6811d69a 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -873,6 +873,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (WARN_ON(!host) || WARN_ON(!host->cmd))
> return IRQ_NONE;
>
> + /* ack all raised interrupts */
> + writel(status, host->regs + SD_EMMC_STATUS);
> +
> cmd = host->cmd;
> data = cmd->data;
> cmd->error = 0;
> @@ -919,9 +922,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (ret == IRQ_HANDLED)
> meson_mmc_request_done(host->mmc, cmd->mrq);
>
> - /* ack all raised interrupts */
> - writel(status, host->regs + SD_EMMC_STATUS);
> -
> return ret;
> }
>
> --
> 2.20.1
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-05-28 8:53 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-23 14:59 [PATCH] mmc: meson-gx: fix irq ack Jerome Brunet
2019-05-23 14:59 ` Jerome Brunet
2019-05-23 15:47 ` Kevin Hilman
2019-05-23 15:47 ` Kevin Hilman
2019-05-23 15:47 ` Kevin Hilman
2019-05-28 7:27 ` Brad Harper
2019-05-28 7:27 ` Brad Harper
2019-05-28 8:53 ` Ulf Hansson
2019-05-28 8:53 ` Ulf Hansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.