From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joonyoung Shim Date: Fri, 15 Jun 2012 16:15:11 +0900 Subject: [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel In-Reply-To: <1339049394-4816-8-git-send-email-rajeshwari.s@samsung.com> References: <1339049394-4816-1-git-send-email-rajeshwari.s@samsung.com> <1339049394-4816-8-git-send-email-rajeshwari.s@samsung.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, 2012/6/7 Rajeshwari Shinde : > This adds multiple i2c channel support for I2C. > > Signed-off-by: Alim Akhtar > Signed-off-by: Rajeshwari Shinde > Acked-by: Simon Glass > --- > ?drivers/i2c/s3c24x0_i2c.c | ? 27 +++++++++++++++++++++++++++ > ?1 files changed, 27 insertions(+), 0 deletions(-) > > diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c > index a71f147..7521cb8 100644 > --- a/drivers/i2c/s3c24x0_i2c.c > +++ b/drivers/i2c/s3c24x0_i2c.c > @@ -191,6 +191,33 @@ static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus) > ? ? ? ?i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); > ?} > > +/* > + * MULTI BUS I2C support > + */ > + > +#ifdef CONFIG_I2C_MULTI_BUS > +int i2c_set_bus_num(unsigned int bus) > +{ > + ? ? ? struct s3c24x0_i2c *i2c; > + > + ? ? ? if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) { > + ? ? ? ? ? ? ? debug("Bad bus: %d\n", bus); > + ? ? ? ? ? ? ? return -1; > + ? ? ? } > + > + ? ? ? g_current_bus = bus; > + ? ? ? i2c = get_base_i2c(g_current_bus); > + ? ? ? i2c_bus_init(i2c, g_current_bus); This causes duplicated pin configuration whenever calls i2c_set_bus_num(). > + > + ? ? ? return 0; > +} > + > +unsigned int i2c_get_bus_num(void) > +{ > + ? ? ? return g_current_bus; > +} > +#endif Does only EXYNOS5 support CONFIG_I2C_MULTI_BUS? > + > ?#ifdef CONFIG_EXYNOS5 > ?void i2c_init(int speed, int slaveadd) > ?{ > -- > 1.7.4.4 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Thanks. -- - Joonyoung Shim