From: "Lespiau, Damien" <damien.lespiau@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 00/58] modeset-rework, the basic conversion
Date: Wed, 22 Aug 2012 11:46:02 +0100 [thread overview]
Message-ID: <CAPX-8+_wU0KK+EHJ+3EnWU9XqzMuEmUgcZFVB73kVeaVjDNgDA@mail.gmail.com> (raw)
In-Reply-To: <20120821181153.GF5156@phenom.ffwll.local>
[-- Attachment #1: Type: text/plain, Size: 432 bytes --]
On Tue, Aug 21, 2012 at 7:11 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
>> Smoke-tested the new modeset-rework branch and found a regression on
>> my IVB with a pristine f17 userland:
>>
>> * start with LVDS + VGA
>> * unplug VGA
>> * LVDS goes black
>
> Hm, not yet seen this one here. Can you attach a full dmesg with
> drm.debug=0xe when this is happening, please?
Attached dmesg from the point the VGA is plug out.
--
Damien
[-- Attachment #2: vga+lvds-unplug-vga-lvds-fail.dmesg --]
[-- Type: application/octet-stream, Size: 24093 bytes --]
[ 177.183598] [drm:i915_hotplug_work_func], running encoder hotplug functions
[ 177.183623] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa0f40018, result 0
[ 177.183627] [drm:intel_crt_detect], CRT not detected via hotplug
[ 177.184723] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 177.184730] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 177.184733] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 177.184737] [drm:output_poll_execute], [CONNECTOR:15:VGA-1] status updated from 1 to 2
[ 177.192713] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 177.192718] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-1] status updated from 2 to 2
[ 177.195324] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.199320] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.203315] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.204695] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.204703] [drm:output_poll_execute], [CONNECTOR:21:DP-1] status updated from 2 to 2
[ 177.206699] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 177.206709] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 177.206714] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-2] status updated from 2 to 2
[ 177.208696] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 177.208706] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 177.208711] [drm:output_poll_execute], [CONNECTOR:26:HDMI-A-3] status updated from 2 to 2
[ 177.211325] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.215299] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.219278] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.220679] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.220687] [drm:output_poll_execute], [CONNECTOR:27:DP-2] status updated from 2 to 2
[ 177.223306] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.227284] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.231279] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.232665] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.232674] [drm:output_poll_execute], [CONNECTOR:29:DP-3] status updated from 2 to 2
[ 177.236679] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 177.236689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1]
[ 177.236708] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:LVDS-1] probed modes :
[ 177.236712] [drm:drm_mode_debug_printmodeline], Modeline 31:"1366x768" 60 74800 1366 1414 1446 1578 768 770 775 790 0x48 0xa
[ 177.236720] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[ 177.236976] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 177.236980] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 177.236993] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa0f40018, result 0
[ 177.236996] [drm:intel_crt_detect], CRT not detected via hotplug
[ 177.238690] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 177.238702] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 177.238706] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 177.238712] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 177.238719] [drm:drm_mode_debug_printmodeline], Modeline 32:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 177.238724] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode -3
[ 177.238727] [drm:drm_mode_debug_printmodeline], Modeline 40:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 177.238732] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode -3
[ 177.238735] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[ 177.238739] [drm:drm_mode_prune_invalid], Not using 1680x1050 mode -3
[ 177.238741] [drm:drm_mode_debug_printmodeline], Modeline 71:"1680x945" 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6
[ 177.238746] [drm:drm_mode_prune_invalid], Not using 1680x945 mode -3
[ 177.238749] [drm:drm_mode_debug_printmodeline], Modeline 65:"1400x1050" 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6
[ 177.238753] [drm:drm_mode_prune_invalid], Not using 1400x1050 mode -3
[ 177.238756] [drm:drm_mode_debug_printmodeline], Modeline 39:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
[ 177.238760] [drm:drm_mode_prune_invalid], Not using 1600x900 mode -3
[ 177.238762] [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 177.238767] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 177.238770] [drm:drm_mode_debug_printmodeline], Modeline 63:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 177.238774] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 177.238776] [drm:drm_mode_debug_printmodeline], Modeline 38:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
[ 177.238780] [drm:drm_mode_prune_invalid], Not using 1440x900 mode -3
[ 177.238783] [drm:drm_mode_debug_printmodeline], Modeline 66:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
[ 177.238788] [drm:drm_mode_prune_invalid], Not using 1440x900 mode -3
[ 177.238790] [drm:drm_mode_debug_printmodeline], Modeline 37:"1280x960" 75 129936 1280 1368 1504 1728 960 961 964 1002 0x0 0x6
[ 177.238794] [drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
[ 177.238797] [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 177.238801] [drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
[ 177.238804] [drm:drm_mode_debug_printmodeline], Modeline 70:"1366x768" 60 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
[ 177.238808] [drm:drm_mode_prune_invalid], Not using 1366x768 mode -3
[ 177.238810] [drm:drm_mode_debug_printmodeline], Modeline 64:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[ 177.238814] [drm:drm_mode_prune_invalid], Not using 1360x768 mode -3
[ 177.238817] [drm:drm_mode_debug_printmodeline], Modeline 61:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
[ 177.238821] [drm:drm_mode_prune_invalid], Not using 1280x800 mode -3
[ 177.238824] [drm:drm_mode_debug_printmodeline], Modeline 60:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 177.238828] [drm:drm_mode_prune_invalid], Not using 1280x800 mode -3
[ 177.238830] [drm:drm_mode_debug_printmodeline], Modeline 56:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 177.238834] [drm:drm_mode_prune_invalid], Not using 1152x864 mode -3
[ 177.238838] [drm:drm_mode_debug_printmodeline], Modeline 59:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
[ 177.238842] [drm:drm_mode_prune_invalid], Not using 1280x768 mode -3
[ 177.238844] [drm:drm_mode_debug_printmodeline], Modeline 58:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[ 177.238848] [drm:drm_mode_prune_invalid], Not using 1280x768 mode -3
[ 177.238851] [drm:drm_mode_debug_printmodeline], Modeline 36:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
[ 177.238855] [drm:drm_mode_prune_invalid], Not using 1280x720 mode -3
[ 177.238857] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 177.238861] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 177.238864] [drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 177.238868] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 177.238871] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 177.238875] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 177.238877] [drm:drm_mode_debug_printmodeline], Modeline 67:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
[ 177.238881] [drm:drm_mode_prune_invalid], Not using 1024x576 mode -3
[ 177.238884] [drm:drm_mode_debug_printmodeline], Modeline 53:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 177.238888] [drm:drm_mode_prune_invalid], Not using 832x624 mode -3
[ 177.238891] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 177.238895] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 177.238898] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 177.238902] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 177.238904] [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 177.238908] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 177.238911] [drm:drm_mode_debug_printmodeline], Modeline 43:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 177.238915] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 177.238917] [drm:drm_mode_debug_printmodeline], Modeline 57:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 177.238921] [drm:drm_mode_prune_invalid], Not using 848x480 mode -3
[ 177.238924] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 177.238928] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 177.238930] [drm:drm_mode_debug_printmodeline], Modeline 44:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 177.238934] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 177.238937] [drm:drm_mode_debug_printmodeline], Modeline 46:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 177.238941] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 177.238943] [drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 177.238947] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 177.238950] [drm:drm_mode_debug_printmodeline], Modeline 48:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 177.238954] [drm:drm_mode_prune_invalid], Not using 720x400 mode -3
[ 177.238980] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 177.238984] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1]
[ 177.238991] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa0f40018, result 0
[ 177.238994] [drm:intel_crt_detect], CRT not detected via hotplug
[ 177.240666] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 177.240676] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 177.240680] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 177.240688] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:VGA-1] disconnected
[ 177.240767] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 177.243345] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.248316] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.253273] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.255684] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.255715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 177.263630] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 177.263637] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[ 177.263660] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 177.263664] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
[ 177.271619] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 177.271623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
[ 177.271660] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 177.271664] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 177.274278] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.278301] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.282238] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.283626] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.283639] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 177.283668] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
[ 177.283673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1]
[ 177.286290] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.290225] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.294235] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.295654] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.295668] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:DP-1] disconnected
[ 177.295716] [drm:drm_mode_getconnector], [CONNECTOR:24:?]
[ 177.298350] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.302210] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.306208] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.307595] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.307654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-2]
[ 177.310607] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 177.310618] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 177.310626] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-2] disconnected
[ 177.310655] [drm:drm_mode_getconnector], [CONNECTOR:24:?]
[ 177.310660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-2]
[ 177.313609] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 177.313620] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 177.313628] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:HDMI-A-2] disconnected
[ 177.313672] [drm:drm_mode_getconnector], [CONNECTOR:26:?]
[ 177.313678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:HDMI-A-3]
[ 177.315609] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 177.315619] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 177.315627] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:HDMI-A-3] disconnected
[ 177.315655] [drm:drm_mode_getconnector], [CONNECTOR:26:?]
[ 177.315660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:HDMI-A-3]
[ 177.317565] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 177.317575] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 177.317582] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:26:HDMI-A-3] disconnected
[ 177.317624] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 177.320247] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.324213] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.328219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.329572] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.329631] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 177.332271] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.336166] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.340160] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.341556] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.341569] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 177.341599] [drm:drm_mode_getconnector], [CONNECTOR:27:?]
[ 177.341603] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2]
[ 177.344216] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.348191] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.352137] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.353541] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.353554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:27:DP-2] disconnected
[ 177.353598] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 177.353604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 177.356235] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.360146] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.364148] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.365561] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.365574] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 177.365605] [drm:drm_mode_getconnector], [CONNECTOR:29:?]
[ 177.365610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3]
[ 177.368225] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.372155] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.376129] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 177.377505] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 177.377518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:29:DP-3] disconnected
[ 177.385474] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 177.387473] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 177.387484] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 177.389463] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 177.389470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 177.389592] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xa0f40018, result 0
[ 177.389597] [drm:intel_crt_detect], CRT not detected via hotplug
[ 177.391471] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 177.391478] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 177.391482] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 177.499298] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
[ 177.533343] [drm:intel_disable_pch_pll], disable PCH PLL c6018 (active 1, on? 1) for crtc 5
[ 177.533352] [drm:intel_disable_pch_pll], disabling PCH PLL c6018
[ 177.533773] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[ 177.533776] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 14, cursor: 6
[ 177.534220] [drm:intel_crtc_cursor_set], cursor off
[ 177.537810] [drm:drm_mode_addfb], [FB:12]
[ 177.537870] [drm:drm_mode_setcrtc], [CRTC:3]
[ 177.537876] [drm:drm_mode_setcrtc], [CONNECTOR:9:LVDS-1]
[ 177.537879] [drm:intel_crtc_set_config], [CRTC:3] [FB:12] #connectors=1 (x y) (0 0)
[ 177.537890] [drm:intel_modeset_stage_output_state], [CONNECTOR:9:LVDS-1] to [CRTC:3]
[ 177.537893] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 177.537895] [drm:intel_crtc_set_config], attempting to set mode from userspace
[ 177.537898] [drm:drm_mode_debug_printmodeline], Modeline 32:"" 0 74800 1366 1414 1446 1578 768 770 775 790 0x0 0xa
[ 177.537904] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 0, disable: 2
[ 177.537913] [drm:intel_modeset_adjusted_mode], [CRTC:3]
[ 177.537923] [drm:ironlake_get_refclk], using SSC reference clock of 120 MHz
[ 177.537968] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6)
[ 177.537970] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 6)
[ 177.537976] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[ 177.537978] [drm:drm_mode_debug_printmodeline], Modeline 32:"" 0 74800 1366 1414 1446 1578 768 770 775 790 0x0 0xa
[ 177.537983] [drm:intel_get_pch_pll], CRTC:3 reusing existing PCH PLL c6014
[ 177.537985] [drm:intel_get_pch_pll], switching PLL c6014 off
[ 177.590254] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 177.596181] [drm:ironlake_update_plane], Writing base 025CF000 00000000 0 0 5632
[ 177.648141] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 177.648155] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 8, cursor: 6
[ 177.648160] [drm:ironlake_check_srwm], watermark 1: display plane 12, fbc lines 3, cursor 6
[ 177.648164] [drm:ironlake_check_srwm], watermark 2: display plane 40, fbc lines 3, cursor 6
[ 177.648168] [drm:ironlake_check_srwm], watermark 3: display plane 77, fbc lines 3, cursor 6
[ 177.648174] [drm:intel_crtc_mode_set], [ENCODER:10:LVDS-10] set [MODE:32:]
[ 177.648188] [drm:intel_connector_check_state], [CONNECTOR:9:LVDS-1]
[ 177.648200] [drm:intel_modeset_check_state], [ENCODER:10:LVDS-10]
[ 177.648205] [drm:intel_modeset_check_state], [ENCODER:16:DAC-16]
[ 177.648209] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
[ 177.648213] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22]
[ 177.648217] [drm:intel_modeset_check_state], [ENCODER:23:TMDS-23]
[ 177.648222] [drm:intel_modeset_check_state], [ENCODER:25:TMDS-25]
[ 177.648226] [drm:intel_modeset_check_state], [ENCODER:28:TMDS-28]
[ 177.648230] [drm:intel_modeset_check_state], [ENCODER:30:TMDS-30]
[ 177.648234] [drm:intel_modeset_check_state], [CRTC:3]
[ 177.648237] [drm:intel_modeset_check_state], [CRTC:5]
[ 177.648239] [drm:intel_modeset_check_state], [CRTC:7]
[ 187.229041] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0x20f40018, result 0
[ 187.229050] [drm:intel_crt_detect], CRT not detected via hotplug
[ 187.230757] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 187.230766] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 187.230769] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 187.230774] [drm:output_poll_execute], [CONNECTOR:15:VGA-1] status updated from 2 to 2
[ 187.238745] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb
[ 187.238749] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-1] status updated from 2 to 2
[ 187.241359] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.245334] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.249328] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.250712] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 187.250717] [drm:output_poll_execute], [CONNECTOR:21:DP-1] status updated from 2 to 2
[ 187.252734] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 187.252743] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 187.252748] [drm:output_poll_execute], [CONNECTOR:24:HDMI-A-2] status updated from 2 to 2
[ 187.254723] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 187.254732] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 187.254738] [drm:output_poll_execute], [CONNECTOR:26:HDMI-A-3] status updated from 2 to 2
[ 187.257356] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.261319] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.265331] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.266711] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 187.266719] [drm:output_poll_execute], [CONNECTOR:27:DP-2] status updated from 2 to 2
[ 187.269341] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.273318] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.277313] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 187.278695] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 187.278703] [drm:output_poll_execute], [CONNECTOR:29:DP-3] status updated from 2 to 2
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2012-08-22 10:46 UTC|newest]
Thread overview: 173+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-19 19:12 [PATCH 00/58] modeset-rework, the basic conversion Daniel Vetter
2012-08-19 19:12 ` [PATCH 01/58] drm/i915: add crtc->enable/disable vfuncs insted of dpms Daniel Vetter
2012-08-29 17:51 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 02/58] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-08-29 17:52 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 03/58] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-08-29 18:01 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 04/58] drm/i915/hdmi: convert to encoder->disable/enable Daniel Vetter
2012-09-04 19:24 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 05/58] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-09-04 19:25 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 06/58] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-09-04 19:26 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 07/58] drm/i915/dp: " Daniel Vetter
2012-09-04 19:33 ` Jesse Barnes
2012-09-04 19:42 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 08/58] drm/i915/crt: " Daniel Vetter
2012-09-04 19:50 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 09/58] drm/i915/sdvo: " Daniel Vetter
2012-09-04 19:52 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 10/58] drm/i915/dvo: " Daniel Vetter
2012-09-04 19:53 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 11/58] drm/i915: convert dpms functions of dvo/sdvo/crt Daniel Vetter
2012-08-29 7:12 ` [PATCH] " Daniel Vetter
2012-09-04 20:10 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 12/58] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-09-04 20:11 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 13/58] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-09-04 20:12 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 14/58] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-09-04 20:13 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 15/58] drm/i915: call set_base directly Daniel Vetter
2012-09-04 20:15 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 16/58] drm/i915: inline intel_best_encoder Daniel Vetter
2012-09-04 20:18 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 17/58] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-09-04 20:19 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 18/58] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-09-04 20:20 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 19/58] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-09-04 20:21 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 20/58] drm/i915: call crtc functions directly Daniel Vetter
2012-09-04 20:22 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 21/58] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-09-04 20:23 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 22/58] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-09-04 20:25 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 23/58] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-09-04 20:26 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 24/58] drm/i915/hdmi: " Daniel Vetter
2012-09-04 20:28 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 25/58] drm/i915/tv: " Daniel Vetter
2012-09-04 20:28 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 26/58] drm/i915/lvds: " Daniel Vetter
2012-09-04 20:28 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 27/58] drm/i915/crt: " Daniel Vetter
2012-09-04 20:29 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 28/58] drm/i915/sdvo: " Daniel Vetter
2012-09-04 20:31 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 29/58] drm/i915/dvo: " Daniel Vetter
2012-09-04 20:32 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 30/58] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-09-05 16:14 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 31/58] drm/i915: check connector hw/sw state Daniel Vetter
2012-09-05 16:26 ` Jesse Barnes
2012-09-05 19:10 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 32/58] drm/i915: rip out intel_crtc->dpms_mode Daniel Vetter
2012-09-05 16:27 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 33/58] drm/i915: rip out intel_dp->dpms_mode Daniel Vetter
2012-09-05 16:28 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 34/58] drm/i915: ensure the force pipe A quirk is actually followed Daniel Vetter
2012-09-05 16:32 ` Jesse Barnes
2012-09-05 19:12 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 35/58] drm/i915: introduce struct intel_set_config Daniel Vetter
2012-09-05 16:34 ` Jesse Barnes
2012-09-05 19:27 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 36/58] drm/i915: extract modeset config save/restore code Daniel Vetter
2012-09-05 16:36 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 37/58] drm/i915: extract intel_set_config_compute_mode_changes Daniel Vetter
2012-09-05 16:42 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 38/58] drm/i915: extract intel_set_config_update_output_state Daniel Vetter
2012-09-05 16:44 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 39/58] drm/i915: implement crtc helper semantics relied upon by the fb helper Daniel Vetter
2012-09-05 16:45 ` Jesse Barnes
2012-09-05 19:15 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 40/58] drm/i915: don't update the fb base if there is no fb Daniel Vetter
2012-09-05 16:47 ` Jesse Barnes
2012-08-19 19:12 ` [PATCH 41/58] drm/i915: convert pointless error checks in set_config to BUGs Daniel Vetter
2012-09-05 16:50 ` Jesse Barnes
2012-09-05 19:19 ` Daniel Vetter
2012-08-19 19:12 ` [PATCH 42/58] drm/i915: don't save all the encoder/crtc state in set_config Daniel Vetter
2012-09-05 16:52 ` Jesse Barnes
2012-09-05 19:21 ` Daniel Vetter
2012-08-19 19:13 ` [PATCH 43/58] drm/i915: stage modeset output changes Daniel Vetter
2012-09-05 17:51 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 44/58] drm/i915: push crtc->fb update into pipe_set_base Daniel Vetter
2012-09-04 19:33 ` [PATCH] " Daniel Vetter
2012-09-05 17:55 ` Jesse Barnes
2012-09-05 19:59 ` Daniel Vetter
2012-09-05 17:54 ` [PATCH 44/58] " Jesse Barnes
2012-08-19 19:13 ` [PATCH 45/58] drm/i915: remove crtc disabling special case Daniel Vetter
2012-09-05 17:56 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 46/58] drm/i915: move output commit and crtc disabling into set_mode Daniel Vetter
2012-09-05 17:58 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 47/58] drm/i915: extract adjusted mode computation Daniel Vetter
2012-09-05 18:00 ` Jesse Barnes
2012-09-05 19:30 ` Daniel Vetter
2012-08-19 19:13 ` [PATCH 48/58] drm/i915: use staged outuput config in tv->mode_fixup Daniel Vetter
2012-09-05 18:02 ` Jesse Barnes
2012-09-06 7:30 ` Daniel Vetter
2012-08-19 19:13 ` [PATCH 49/58] drm/i915: use staged outuput config in lvds->mode_fixup Daniel Vetter
2012-09-05 18:02 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 50/58] drm/i915: compute masks of crtcs affected in set_mode Daniel Vetter
2012-08-29 10:34 ` [PATCH] " Daniel Vetter
2012-09-05 18:09 ` Jesse Barnes
2012-09-05 19:38 ` Daniel Vetter
2012-09-05 19:45 ` Jesse Barnes
2012-09-05 18:07 ` [PATCH 50/58] " Jesse Barnes
2012-08-19 19:13 ` [PATCH 51/58] drm/i915: implement new set_mode code flow Daniel Vetter
2012-09-05 18:14 ` Jesse Barnes
2012-09-05 19:43 ` Daniel Vetter
2012-09-05 19:49 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 52/58] drm/i915: push commit_output_state past crtc disabling Daniel Vetter
2012-09-05 18:17 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 53/58] drm/i915: s/intel_encoder_disable/intel_encoder_noop Daniel Vetter
2012-09-05 18:17 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 54/58] drm/i915: WARN if the pipe won't turn off Daniel Vetter
2012-09-05 18:18 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 55/58] drm/i915: switch the load detect code to the staged modeset config Daniel Vetter
2012-09-05 18:19 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 56/58] drm/i915: push commit_output_state past the crtc/encoder preparing Daniel Vetter
2012-08-31 18:12 ` [PATCH] " Daniel Vetter
2012-09-04 19:32 ` Daniel Vetter
2012-09-05 18:28 ` Jesse Barnes
2012-09-05 19:48 ` Daniel Vetter
2012-09-05 18:56 ` [PATCH] drm/i915: push crtc->fb update into pipe_set_base Daniel Vetter
2012-09-05 19:50 ` [PATCH] drm/i915: push commit_output_state past the crtc/encoder preparing Jesse Barnes
2012-09-06 20:46 ` Jesse Barnes
2012-08-19 19:13 ` [PATCH 57/58] drm/i915: disable all crtcs at suspend time Daniel Vetter
2012-08-29 21:13 ` [PATCH] drm/i915: no longer call drm_helper_resume_force_mode Daniel Vetter
2012-09-05 18:31 ` Jesse Barnes
2012-09-05 19:56 ` Daniel Vetter
2012-09-05 20:04 ` Jesse Barnes
2012-09-06 20:47 ` Jesse Barnes
2012-09-05 18:29 ` [PATCH 57/58] drm/i915: disable all crtcs at suspend time Jesse Barnes
2012-08-19 19:13 ` [PATCH 58/58] drm/i915: add tons of modeset state checks Daniel Vetter
2012-08-20 8:24 ` [PATCH] " Daniel Vetter
2012-08-20 12:22 ` Daniel Vetter
2012-08-31 18:12 ` [PATCH 1/2] " Daniel Vetter
2012-08-31 18:12 ` [PATCH 2/2] drm/i915: improve modeset state checking after dpms calls Daniel Vetter
2012-09-05 18:34 ` Jesse Barnes
2012-09-05 18:33 ` [PATCH 1/2] drm/i915: add tons of modeset state checks Jesse Barnes
2012-08-20 13:17 ` [PATCH 00/58] modeset-rework, the basic conversion Jani Nikula
2012-08-21 3:27 ` Ben Widawsky
2012-08-21 17:48 ` Lespiau, Damien
2012-08-21 18:11 ` Daniel Vetter
2012-08-22 10:46 ` Lespiau, Damien [this message]
2012-08-22 11:03 ` Lespiau, Damien
2012-08-22 19:13 ` Lespiau, Damien
2012-08-22 21:21 ` Daniel Vetter
2012-08-23 12:26 ` Lespiau, Damien
2012-08-23 22:39 ` Daniel Vetter
2012-08-29 12:26 ` Lespiau, Damien
2012-08-30 10:40 ` Rodrigo Vivi
2012-08-21 19:48 ` Chris Wilson
2012-08-27 8:04 ` Vijay Purushothaman
2012-09-03 17:50 ` Paulo Zanoni
2012-09-05 23:23 ` Jesse Barnes
2012-09-06 6:55 ` Daniel Vetter
2012-09-06 7:23 ` Daniel Vetter
2012-09-07 1:08 ` Jesse Barnes
2012-09-07 8:55 ` Daniel Vetter
2012-09-06 21:00 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPX-8+_wU0KK+EHJ+3EnWU9XqzMuEmUgcZFVB73kVeaVjDNgDA@mail.gmail.com \
--to=damien.lespiau@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.