From mboxrd@z Thu Jan 1 00:00:00 1970 From: Drew Fustini Date: Fri, 14 May 2021 14:06:18 -0700 Subject: [Buildroot] [PATCH v3 0/7] Support for the BeagleV platform In-Reply-To: <20210504205139.1055360-1-thomas.petazzoni@bootlin.com> References: <20210504205139.1055360-1-thomas.petazzoni@bootlin.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tue, May 4, 2021 at 1:51 PM Thomas Petazzoni wrote: > > Hello, > > Here is a third iteration of the BeagleV patch series, which brings a > few fixes: > > * The post-build script of v1 calling "make printvars" was working > only for in-tree builds. Following a comment from Frank Hunleth on > the v1, it was changed in v2 to use "make -C ${O} printvars", which > made out-of-tree builds work, but broke in-tree builds. So in this > new version, we introduced a preliminary patch that exposes > $(CONFIG_DIR) to post-build/post-image scripts, to make such "make > printvars" invocations possible. > > * The beaglev_defconfig is updated to take into account the rename of > the Git repositories by Starfive for Linux, U-Boot and OpenSBI. > > * Reviewed-by tags from Bin Meng are added on beaglev-ddrinit, > beaglev-secondboot and the corresponding beaglev_defconfig > update. Thanks Bin! > > As usual, the whole thing is also available at: > > https://github.com/tpetazzoni/buildroot/commits/beaglev > > Best regards, > > Thomas Petazzoni > > Thomas Petazzoni (7): > package/Makefile.in: expose CONFIG_DIR to post-build/post-image > scripts > boot/opensbi: add options to enable/disable image installation > configs/beaglev_defconfig: new defconfig > package/riscv64-elf-toolchain: new package > boot/beaglev-ddrinit: new package > boot/beaglev-secondboot: new package > configs/beaglev: enable building of low-level firmware > > DEVELOPERS | 5 + > board/beaglev/extlinux.conf | 4 + > board/beaglev/genimage.cfg | 12 ++ > ...s-starfive-vic7100-adjust-fdt_addr_r.patch | 39 ++++++ > board/beaglev/post-build.sh | 17 +++ > board/beaglev/readme.txt | 122 ++++++++++++++++++ > boot/Config.in | 2 + > boot/beaglev-ddrinit/Config.in | 9 ++ > boot/beaglev-ddrinit/beaglev-ddrinit.mk | 29 +++++ > boot/beaglev-secondboot/Config.in | 9 ++ > boot/beaglev-secondboot/beaglev-secondboot.mk | 29 +++++ > boot/opensbi/Config.in | 20 +++ > boot/opensbi/opensbi.mk | 16 ++- > configs/beaglev_defconfig | 37 ++++++ > docs/manual/customize-post-image.txt | 3 +- > docs/manual/customize-rootfs.txt | 3 + > package/Makefile.in | 1 + > .../riscv64-elf-toolchain.mk | 25 ++++ > 18 files changed, 375 insertions(+), 7 deletions(-) > create mode 100644 board/beaglev/extlinux.conf > create mode 100644 board/beaglev/genimage.cfg > create mode 100644 board/beaglev/patches/uboot/0001-include-configs-starfive-vic7100-adjust-fdt_addr_r.patch > create mode 100755 board/beaglev/post-build.sh > create mode 100644 board/beaglev/readme.txt > create mode 100644 boot/beaglev-ddrinit/Config.in > create mode 100644 boot/beaglev-ddrinit/beaglev-ddrinit.mk > create mode 100644 boot/beaglev-secondboot/Config.in > create mode 100644 boot/beaglev-secondboot/beaglev-secondboot.mk > create mode 100644 configs/beaglev_defconfig > create mode 100644 package/riscv64-elf-toolchain/riscv64-elf-toolchain.mk > > -- > 2.30.2 > Thank you so much again for getting support added to buildroot. I wanted to note that Kali Prasad (cc'd) has developed a very helpful bootloader recovery tool [1] that is a simple C program and would probably be useful to include in the beaglev buildroot config. This works around the problem that the BootROM in the StarFive JH7100 has a buggy xmodem crc implementation that did not work with any of the existing open source terminal emulators. -Drew [1] https://github.com/kprasadvnsi/JH71xx-tools