From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Wed, 12 Feb 2020 10:14:31 -0700 Subject: dm, serial: problem with using ns16550 driver before relocation on mpc83xx In-Reply-To: References: <1b1905b5-b696-dbe9-2708-5ed9ea6bf1ac@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heiko, On Tue, 11 Feb 2020 at 23:37, Heiko Schocher wrote: > > Hello Mario, Simon, > > Am 10.02.2020 um 07:16 schrieb Mario Six: > > Hi Heiko, > > > > On Fri, Feb 7, 2020 at 6:53 AM Heiko Schocher wrote: > >> > >> Hi Simon, > >> > >> removed Dirk from cc and added Mario Six > >> > >> @Mario: Dirk is maintainer of the gazerbeam board: > >> > >> https://gitlab.denx.de/u-boot/u-boot/blob/master/board/gdsys/mpc8308/MAINTAINERS#L2 > >> > >> but EMail get not delivered to his EMail address ... so I added > >> you to cc ... may you have a gazerbeam board? May you can try, > >> if current U-Boot mainline works (in special serial console) on it? > >> > > Dirk no longer works as gdsys (which is also the reason why I'm much less > > active on the mailing list than I used to be). > > > > I have a gazerbeam board. I'll try to get some time to test mainline on it some > > time this week. > > The problem is gone, no need for my fix. I made a cleanbuild after > I rebased with mainline this morning (without my "fix"), and all works > fine. > > Sorry for the inconvenience! Oh strange, but good news! Regards, Simon