From mboxrd@z Thu Jan  1 00:00:00 1970
From: Simon Glass <sjg@chromium.org>
Date: Thu, 22 Nov 2018 13:50:17 -0700
Subject: [U-Boot] [PATCH 55/93] arm: Remove chiliboard board
In-Reply-To: <87r2febn2t.fsf@grinn-global.com>
References: <20181119155413.158098-1-sjg@chromium.org>
 <20181119155413.158098-56-sjg@chromium.org>
 <87r2febn2t.fsf@grinn-global.com>
Message-ID: <CAPnjgZ0Oje7PYMC3KBTJ10mWS_r3HK8deM1k5htn4nz285mOSQ@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: u-boot@lists.denx.de

Hi Marcin,

On Wed, 21 Nov 2018 at 06:05, Marcin Niestr=C3=B3j
<m.niestroj@grinn-global.com> wrote:
>
> Hi Simon, All,
>
> Simon Glass <sjg@chromium.org> writes:
>
> > This board has not been converted to CONFIG_DM_BLK by the deadline.
> > Remove it.
>
> I just got my hands on chiliboard to start using device-model
> drivers. Unfortunately this board does not boot already on master
> branch. `git bisect` returned d0851c8937067ad396f2bdafc46d0326bf3317db
> ("blk: Call part_init() in the post_probe() method") as the first bad
> commit. It would not be a big problem if we would switch after 1-2 weeks
> anyway, but I am not sure that will happen based on the
> discussions. Anyway, it is better you know about that problem. Below you
> can find logs from boot process.
>
> After bad commit:
>
>   U-Boot SPL 2018.11 (Nov 21 2018 - 13:35:44 +0100)
>   Trying to boot from MMC1
>
>
>   U-Boot 2018.11 (Nov 21 2018 - 13:35:44 +0100)
>
>   CPU  : AM335X-GP rev 2.1
>   I2C:   ready
>   DRAM:  256 MiB
>   NAND:  256 MiB
>   MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
>   Loading Environment from MMC... *** Warning - bad CRC, using default en=
vironment
>
>   <ethaddr> not set. Validating first E-fuse MAC
>   Net:   cpsw
>   Hit any key to stop autoboot:  0
>   switch to partitions #0, OK
>   mmc0 is current device
>   SD/MMC found on device 0
>   ** No partition table - mmc 0 **
>   ** No partition table - mmc 0 **
>   Booting from nand ...
>
> Before bad commit:
>
>   U-Boot SPL 2018.11 (Nov 21 2018 - 13:36:26 +0100)
>   Trying to boot from MMC1
>
>
>   U-Boot 2018.11 (Nov 21 2018 - 13:36:26 +0100)
>
>   CPU  : AM335X-GP rev 2.1
>   I2C:   ready
>   DRAM:  256 MiB
>   NAND:  256 MiB
>   MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
>   Loading Environment from MMC... *** Warning - bad CRC, using default en=
vironment
>
>   <ethaddr> not set. Validating first E-fuse MAC
>   Net:   cpsw
>   Hit any key to stop autoboot:  0
>   switch to partitions #0, OK
>   mmc0 is current device
>   SD/MMC found on device 0
>   5892272 bytes read in 370 ms (15.2 MiB/s)
>   32494 bytes read in 4 ms (7.7 MiB/s)
>   ## Flattened Device Tree blob at 87800000
>      Booting using the fdt blob at 0x87800000
>      Loading Device Tree to 8df48000, end 8df52eed ... OK
>
>   Starting kernel ...

I am not sure what is wrong. Does it hang in part_init()? It looks
like you don't have a partition table, but it should still be OK to
probe for it.

Regards,
Simon