From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Sat, 2 May 2015 14:59:00 -0600 Subject: [U-Boot] [RESEND PATCH v3 00/13] Add Marvell Armada A38x 88F6820 SoC support In-Reply-To: <1429936196-13647-1-git-send-email-sr@denx.de> References: <1429936196-13647-1-git-send-email-sr@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefan, On 24 April 2015 at 22:29, Stefan Roese wrote: > > This patch series adds support for the Marvell Armada A38x SoC's. Specifically > the 88F6820 / 88F6828. > > Basic support for the DB-88F6820-GP evaluation board is added. Supporting the > following interfaces: > - UART > - SPI (including SPI NOR flash) > - I2C > - Ethernet (neta) > > One big part of this new SoC support is the move of the already exisiting > Armada XP support into the "mach-mvebu" directory. With this move its > easier to re-use this code for the A38x, which is pretty similar to the > AXP. When I try to build this I get an error - its wants a 'binard.0' file. It talks about extracting this from an 'existing image'. Is it not available as source code? If not, is there a README explaining where to get it? The build fails because of this. If this is the intended final state then I think you should define an environment variable to enable the binary build, so that we don't get buildman errors. For x86 (which has serious problems with binary blobs still) we use BUILD_ROM for this. It probably isn't a very good name for you, but you could create your own. > > Thanks, > Stefan > > Changes in v3: > - Removed coherency feature as its not used in U-Boot at all as pointed > out by Thomas Petazzoni > - Changed CONFIG_I2C_MVTWSI_BASE to CONFIG_I2C_MVTWSI_BASE0 for updates > in mvtwsi I2C driver > - Added Tested-by from Dirk and Kevin > > Changes in v2: > - Made mvebu_soc_family() globally available so that it can be called > from mbus.c > - Add PL310 L2 cache base address > - Update to 256KiB env sector as required for M25P128 > - Add I2C IO expander initialization (fan etc) > - Enable PL310 L2 cache as this is needed for correct caching OPs > > Stefan Roese (13): > arm: armada-xp: Move SoC sources to mach-mvebu > arm: armada-xp: Move SoC headers to mach-mvebu/include/mach > arm: mvebu: Move mvebu-common into mach-mvebu > arm: mvebu: Change header macros from ARMADA_XP to MVEBU > arm: mvebu: Remove unreferenced define > arm: mvebu: Only define MV88F78X60 for Armada XP > arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header > arm: mvebu: Add basic Armada 38x support > arm: mvebu: Change network init code to allow a more flexible setup > arm: mvebu: Remove coherency configuration > arm: mvebu: mv-common.h: Add CONFIG_PREBOOT > arm: mvebu: Add d-cache invalidate before enabling the d-cache > arm: mvebu: Add Armada A38x DB-88F6820-GP board support > > arch/arm/Kconfig | 6 ++ > arch/arm/Makefile | 5 +- > arch/arm/cpu/armv7/Makefile | 1 - > arch/arm/cpu/armv7/armada-xp/Makefile | 9 -- > arch/arm/mach-mvebu/Makefile | 24 +++++ > arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c | 96 +++++++++++++++---- > arch/arm/{mvebu-common => mach-mvebu}/dram.c | 0 > arch/arm/{mvebu-common => mach-mvebu}/gpio.c | 0 > .../include/mach}/config.h | 15 ++- > .../include/mach}/cpu.h | 13 ++- > .../include/mach}/soc.h | 20 ++-- > .../armv7/armada-xp => mach-mvebu}/lowlevel_spl.S | 0 > arch/arm/{mvebu-common => mach-mvebu}/mbus.c | 3 - > .../{mvebu-common => mach-mvebu}/serdes/Makefile | 0 > .../serdes/board_env_spec.h | 0 > .../serdes/high_speed_env_lib.c | 0 > .../serdes/high_speed_env_spec.c | 0 > .../serdes/high_speed_env_spec.h | 0 > arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c | 0 > arch/arm/{mvebu-common => mach-mvebu}/timer.c | 0 > .../{mvebu-common => mach-mvebu}/u-boot-spl.lds | 0 > board/Marvell/db-88f6820-gp/Kconfig | 15 +++ > board/Marvell/db-88f6820-gp/Makefile | 7 ++ > board/Marvell/db-88f6820-gp/binary.0 | 16 ++++ > board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 103 +++++++++++++++++++++ > board/Marvell/db-88f6820-gp/kwbimage.cfg | 12 +++ > board/Marvell/db-mv784mp-gp/Kconfig | 2 +- > board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 3 +- > board/maxbcm/Kconfig | 2 +- > board/maxbcm/maxbcm.c | 2 +- > configs/db-88f6820-gp_defconfig | 2 + > include/configs/db-88f6820-gp.h | 72 ++++++++++++++ > include/configs/db-mv784mp-gp.h | 3 +- > include/configs/maxbcm.h | 3 +- > include/configs/mv-common.h | 1 + > 35 files changed, 378 insertions(+), 57 deletions(-) > delete mode 100644 arch/arm/cpu/armv7/armada-xp/Makefile > create mode 100644 arch/arm/mach-mvebu/Makefile > rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c (71%) > rename arch/arm/{mvebu-common => mach-mvebu}/dram.c (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/gpio.c (100%) > rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/config.h (86%) > rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/cpu.h (93%) > rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/soc.h (81%) > rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/lowlevel_spl.S (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/mbus.c (99%) > rename arch/arm/{mvebu-common => mach-mvebu}/serdes/Makefile (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/serdes/board_env_spec.h (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_lib.c (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.c (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.h (100%) > rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/timer.c (100%) > rename arch/arm/{mvebu-common => mach-mvebu}/u-boot-spl.lds (100%) > create mode 100644 board/Marvell/db-88f6820-gp/Kconfig > create mode 100644 board/Marvell/db-88f6820-gp/Makefile > create mode 100644 board/Marvell/db-88f6820-gp/binary.0 > create mode 100644 board/Marvell/db-88f6820-gp/db-88f6820-gp.c > create mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg > create mode 100644 configs/db-88f6820-gp_defconfig > create mode 100644 include/configs/db-88f6820-gp.h > > -- > 2.3.6 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot Regards, Simon