[U-Boot] [PATCH v3 00/11] pmic: sandbox: Add support for MC34709 PMIC

[U-Boot] [PATCH v3 00/11] pmic: sandbox: Add support for MC34709 PMIC

[Lukasz Majewski]

Adding this device required some changes into the PMIC uclass.
Most notable one was the support for 3 bytes r/w operations.
Moreover, emulation and tests for this device has been added to
sandbox.

Travis-CI:
https://travis-ci.org/lmajewski/u-boot-dfu/builds/378678458


Changes in v3:
- None
- None
- Rename dm_pmic_info to uc_pmic_priv
- Rename dm_pmic_info -> uc_pmic_priv
- Replace printf() -> debug()
- Use priv->trans_len instead of tx_num
- Rename dm_pmic_info with uc_pmic_priv
- Sort alphabetically includes
- Add comment regarding MC34708 byte ordering
- Replace dm_pmic_info with uc_pmic_priv
- Replace pmic_info with priv
- Replace pr_err() with debug()
- dm_pmic_info -> uc_pmic_priv
- Fix DTS property style to compy with Device Tree specification
  as suggested by Fabio.
- Enable MC34708 PMIC support in sandbox_{flattree|spl}_defconfig
- None
- Fix pmic.c test code after adjusting the sandbox PMIC related dts

Changes in v2:
- None
- None
- New patch
- pmic_reg_* fixes to use uclass private structure
- Support for uclass private data with trasfer length
- New patch
- New patch
- New patch
- New patch
- New patch
- New patch

Lukasz Majewski (11):
  pmic: fsl: Provide some more definitions for MC34708 PMIC
  pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
  pmic: Add support for setting transmission length in uclass private
    data
  pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes
    transmissions
  pmic: dm: Add support for MC34708 for PMIC DM
  pmic: Rewrite the pmic command to not only work with single byte
    transmission
  sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes
    transmission
  sandbox: Enable support for MC34708 PMIC in DTS
  sandbox: Enable MC34708 PMIC support
  sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c
  sandbox: tests: Add tests for mc34708 PMIC device

 arch/sandbox/dts/sandbox.dts       |   4 ++
 arch/sandbox/dts/sandbox64.dts     |   4 ++
 arch/sandbox/dts/sandbox_pmic.dtsi |  33 ++++++++++++
 arch/sandbox/dts/test.dts          |   4 ++
 cmd/pmic.c                         |  31 ++++++-----
 configs/sandbox_defconfig          |   1 +
 configs/sandbox_flattree_defconfig |   1 +
 configs/sandbox_spl_defconfig      |   1 +
 drivers/power/pmic/Kconfig         |   7 +++
 drivers/power/pmic/Makefile        |   1 +
 drivers/power/pmic/i2c_pmic_emul.c |  45 +++++++++++-----
 drivers/power/pmic/mc34708.c       | 105 +++++++++++++++++++++++++++++++++++++
 drivers/power/pmic/pmic-uclass.c   |  52 +++++++++++++-----
 include/fsl_pmic.h                 |  41 +++++++++++++++
 include/power/pmic.h               |   9 ++++
 test/dm/pmic.c                     |  68 +++++++++++++++++++++++-
 16 files changed, 367 insertions(+), 40 deletions(-)
 create mode 100644 drivers/power/pmic/mc34708.c

-- 
2.11.0

[U-Boot] [PATCH v3 01/11] pmic: fsl: Provide some more definitions for MC34708 PMIC

[Lukasz Majewski]

This commit adds some more defines for MC34708 PMIC.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

---

Changes in v3:
- None

Changes in v2:
- None

 include/fsl_pmic.h | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h
index 6cab77ecb5..fc9e3152a9 100644
--- a/include/fsl_pmic.h
+++ b/include/fsl_pmic.h
@@ -107,6 +107,7 @@ enum {
 
 /* MC34708 Definitions */
 #define SWx_VOLT_MASK_MC34708	0x3F
+#define SWx_1_110V_MC34708	0x24
 #define SWx_1_250V_MC34708	0x30
 #define SWx_1_300V_MC34708	0x34
 #define TIMER_MASK_MC34708	0x300
@@ -116,4 +117,43 @@ enum {
 #define SWBST_CTRL		31
 #define SWBST_AUTO		0x8
 
+#define MC34708_REG_SW12_OPMODE	28
+
+#define MC34708_SW1AMODE_MASK	0x00000f
+#define MC34708_SW1AMHMODE	0x000010
+#define MC34708_SW1AUOMODE	0x000020
+#define MC34708_SW1DVSSPEED	0x0000c0
+#define MC34708_SW2MODE_MASK	0x03c000
+#define MC34708_SW2MHMODE	0x040000
+#define MC34708_SW2UOMODE	0x080000
+#define MC34708_SW2DVSSPEED	0x300000
+#define MC34708_PLLEN		0x400000
+#define MC34708_PLLX		0x800000
+
+#define MC34708_REG_SW345_OPMODE	29
+
+#define MC34708_SW3MODE_MASK	0x00000f
+#define MC34708_SW3MHMODE	0x000010
+#define MC34708_SW3UOMODE	0x000020
+#define MC34708_SW4AMODE_MASK	0x0003c0
+#define MC34708_SW4AMHMODE	0x000400
+#define MC34708_SW4AUOMODE	0x000800
+#define MC34708_SW4BMODE_MASK	0x00f000
+#define MC34708_SW4BMHMODE	0x010000
+#define MC34708_SW4BUOMODE	0x020000
+#define MC34708_SW5MODE_MASK	0x3c0000
+#define MC34708_SW5MHMODE	0x400000
+#define MC34708_SW5UOMODE	0x800000
+
+#define SW_MODE_OFFOFF		0x00
+#define SW_MODE_PWMOFF		0x01
+#define SW_MODE_PFMOFF		0x03
+#define SW_MODE_APSOFF		0x04
+#define SW_MODE_PWMPWM		0x05
+#define SW_MODE_PWMAPS		0x06
+#define SW_MODE_APSAPS		0x08
+#define SW_MODE_APSPFM		0x0c
+#define SW_MODE_PWMPFM		0x0d
+#define SW_MODE_PFMPFM		0x0f
+
 #endif
-- 
2.11.0

[U-Boot] [PATCH v3 02/11] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC

[Lukasz Majewski]

This patch adds definition of the number of bytes sent at once by the
MC34708 PMIC.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- None

Changes in v2:
- None

 include/fsl_pmic.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h
index fc9e3152a9..132db81757 100644
--- a/include/fsl_pmic.h
+++ b/include/fsl_pmic.h
@@ -156,4 +156,5 @@ enum {
 #define SW_MODE_PWMPFM		0x0d
 #define SW_MODE_PFMPFM		0x0f
 
+#define MC34708_TRANSFER_SIZE 3
 #endif
-- 
2.11.0

[U-Boot] [PATCH v3 03/11] pmic: Add support for setting transmission length in uclass private data

[Lukasz Majewski]

The struct uc_pmic_priv's trans_len field stores the number of types to
be transmitted per PMIC transfer.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Rename dm_pmic_info to uc_pmic_priv

Changes in v2:
- New patch

 drivers/power/pmic/pmic-uclass.c | 10 ++++++++++
 include/power/pmic.h             |  9 +++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/power/pmic/pmic-uclass.c b/drivers/power/pmic/pmic-uclass.c
index 5f0f6ff93e..d7e559a615 100644
--- a/drivers/power/pmic/pmic-uclass.c
+++ b/drivers/power/pmic/pmic-uclass.c
@@ -165,7 +165,17 @@ int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set)
 	return pmic_reg_write(dev, reg, byte);
 }
 
+static int pmic_pre_probe(struct udevice *dev)
+{
+	struct uc_pmic_priv *pmic_priv = dev_get_uclass_priv(dev);
+
+	pmic_priv->trans_len = 1;
+	return 0;
+}
+
 UCLASS_DRIVER(pmic) = {
 	.id		= UCLASS_PMIC,
 	.name		= "pmic",
+	.pre_probe	= pmic_pre_probe,
+	.per_device_auto_alloc_size = sizeof(struct uc_pmic_priv),
 };
diff --git a/include/power/pmic.h b/include/power/pmic.h
index 2ca9365fc8..be9de6b4de 100644
--- a/include/power/pmic.h
+++ b/include/power/pmic.h
@@ -297,6 +297,15 @@ int pmic_reg_write(struct udevice *dev, uint reg, uint value);
  */
 int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set);
 
+/*
+ * This structure holds the private data for PMIC uclass
+ * For now we store information about the number of bytes
+ * being sent at once to the device.
+ */
+struct uc_pmic_priv {
+	uint trans_len;
+};
+
 #endif /* CONFIG_DM_PMIC */
 
 #ifdef CONFIG_POWER
-- 
2.11.0

[U-Boot] [PATCH v3 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions

[Lukasz Majewski]

This commit provides support for transmissions larger than 1 byte for
PMIC devices used with DM (e.g. MC34708 from NXP).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>


---

Changes in v3:
- Rename dm_pmic_info -> uc_pmic_priv
- Replace printf() -> debug()
- Use priv->trans_len instead of tx_num

Changes in v2:
- pmic_reg_* fixes to use uclass private structure

 drivers/power/pmic/pmic-uclass.c | 42 ++++++++++++++++++++++++++++------------
 1 file changed, 30 insertions(+), 12 deletions(-)

diff --git a/drivers/power/pmic/pmic-uclass.c b/drivers/power/pmic/pmic-uclass.c
index d7e559a615..db68c766f5 100644
--- a/drivers/power/pmic/pmic-uclass.c
+++ b/drivers/power/pmic/pmic-uclass.c
@@ -130,23 +130,35 @@ int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len)
 
 int pmic_reg_read(struct udevice *dev, uint reg)
 {
-	u8 byte;
+	struct uc_pmic_priv *priv = dev_get_uclass_priv(dev);
+	u32 val = 0;
 	int ret;
 
-	debug("%s: reg=%x", __func__, reg);
-	ret = pmic_read(dev, reg, &byte, 1);
-	debug(", value=%x, ret=%d\n", byte, ret);
+	if (priv->trans_len < 1 || priv->trans_len > sizeof(val)) {
+		debug("Wrong transmission size [%d]\n", priv->trans_len);
+		return -EINVAL;
+	}
+
+	debug("%s: reg=%x priv->trans_len:%d", __func__, reg, priv->trans_len);
+	ret = pmic_read(dev, reg, (uint8_t *)&val, priv->trans_len);
+	debug(", value=%x, ret=%d\n", val, ret);
 
-	return ret ? ret : byte;
+	return ret ? ret : val;
 }
 
 int pmic_reg_write(struct udevice *dev, uint reg, uint value)
 {
-	u8 byte = value;
+	struct uc_pmic_priv *priv = dev_get_uclass_priv(dev);
 	int ret;
 
-	debug("%s: reg=%x, value=%x", __func__, reg, value);
-	ret = pmic_write(dev, reg, &byte, 1);
+	if (priv->trans_len < 1 || priv->trans_len > sizeof(value)) {
+		debug("Wrong transmission size [%d]\n", priv->trans_len);
+		return -EINVAL;
+	}
+
+	debug("%s: reg=%x, value=%x priv->trans_len:%d", __func__, reg, value,
+	      priv->trans_len);
+	ret = pmic_write(dev, reg, (uint8_t *)&value, priv->trans_len);
 	debug(", ret=%d\n", ret);
 
 	return ret;
@@ -154,15 +166,21 @@ int pmic_reg_write(struct udevice *dev, uint reg, uint value)
 
 int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set)
 {
-	u8 byte;
+	struct uc_pmic_priv *priv = dev_get_uclass_priv(dev);
+	u32 val = 0;
 	int ret;
 
-	ret = pmic_reg_read(dev, reg);
+	if (priv->trans_len < 1 || priv->trans_len > sizeof(val)) {
+		debug("Wrong transmission size [%d]\n", priv->trans_len);
+		return -EINVAL;
+	}
+
+	ret = pmic_read(dev, reg, (uint8_t *)&val, priv->trans_len);
 	if (ret < 0)
 		return ret;
-	byte = (ret & ~clr) | set;
 
-	return pmic_reg_write(dev, reg, byte);
+	val = (val & ~clr) | set;
+	return pmic_write(dev, reg, (uint8_t *)&val, priv->trans_len);
 }
 
 static int pmic_pre_probe(struct udevice *dev)
-- 
2.11.0

[U-Boot] [PATCH v3 05/11] pmic: dm: Add support for MC34708 for PMIC DM

[Lukasz Majewski]

This patch adds support for MC34708 PMIC, to be used with driver model
(DM).

Signed-off-by: Lukasz Majewski <lukma@denx.de>

---

Changes in v3:
- Rename dm_pmic_info with uc_pmic_priv
- Sort alphabetically includes
- Add comment regarding MC34708 byte ordering

Changes in v2:
- Support for uclass private data with trasfer length

 drivers/power/pmic/Kconfig   |   7 +++
 drivers/power/pmic/Makefile  |   1 +
 drivers/power/pmic/mc34708.c | 105 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 113 insertions(+)
 create mode 100644 drivers/power/pmic/mc34708.c

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 40ab9f7fa5..d504c28b77 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -69,6 +69,13 @@ config DM_PMIC_MAX8998
 	This config enables implementation of driver-model pmic uclass features
 	for PMIC MAX8998. The driver implements read/write operations.
 
+config DM_PMIC_MC34708
+	bool "Enable Driver Model for PMIC MC34708"
+	depends on DM_PMIC
+	help
+	 This config enables implementation of driver-model pmic uclass features
+	 for PMIC MC34708. The driver implements read/write operations.
+
 config PMIC_MAX8997
 	bool "Enable Driver Model for PMIC MAX8997"
 	depends on DM_PMIC
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 64382b9deb..2ab3b9f9e1 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
 obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
 obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
+obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
 obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
 obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
diff --git a/drivers/power/pmic/mc34708.c b/drivers/power/pmic/mc34708.c
new file mode 100644
index 0000000000..2b2fc72a47
--- /dev/null
+++ b/drivers/power/pmic/mc34708.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fsl_pmic.h>
+#include <i2c.h>
+#include <power/pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int mc34708_reg_count(struct udevice *dev)
+{
+	return PMIC_NUM_OF_REGS;
+}
+
+static int mc34708_write(struct udevice *dev, uint reg, const u8 *buff,
+			 int len)
+{
+	u8 buf[3] = { 0 };
+	int ret;
+
+	if (len != MC34708_TRANSFER_SIZE)
+		return -EINVAL;
+
+	/*
+	 * The MC34708 sends data with big endian format, hence we need to
+	 * perform manual byte swap.
+	 */
+	buf[0] = buff[2];
+	buf[1] = buff[1];
+	buf[2] = buff[0];
+
+	ret = dm_i2c_write(dev, reg, buf, len);
+	if (ret)
+		printf("write error to device: %p register: %#x!", dev, reg);
+
+	return ret;
+}
+
+static int mc34708_read(struct udevice *dev, uint reg, u8 *buff, int len)
+{
+	u8 buf[3] = { 0 };
+	int ret;
+
+	if (len != MC34708_TRANSFER_SIZE)
+		return -EINVAL;
+
+	ret = dm_i2c_read(dev, reg, buf, len);
+	if (ret)
+		printf("read error from device: %p register: %#x!", dev, reg);
+
+	buff[0] = buf[2];
+	buff[1] = buf[1];
+	buff[2] = buf[0];
+
+	return ret;
+}
+
+static int mc34708_probe(struct udevice *dev)
+{
+	struct uc_pmic_priv *priv = dev_get_uclass_priv(dev);
+
+	priv->trans_len = MC34708_TRANSFER_SIZE;
+
+	/*
+	 * Handle PMIC Errata 37: APS mode not fully functional,
+	 * use explicit PWM or PFM instead
+	 */
+	pmic_clrsetbits(dev, MC34708_REG_SW12_OPMODE,
+			MC34708_SW1AMODE_MASK | MC34708_SW2MODE_MASK,
+			SW_MODE_PWMPWM | (SW_MODE_PWMPWM << 14u));
+
+	pmic_clrsetbits(dev, MC34708_REG_SW345_OPMODE,
+			MC34708_SW3MODE_MASK | MC34708_SW4AMODE_MASK |
+			MC34708_SW4BMODE_MASK | MC34708_SW5MODE_MASK,
+			SW_MODE_PWMPWM | (SW_MODE_PWMPWM << 6u) |
+			(SW_MODE_PWMPWM << 12u) | (SW_MODE_PWMPWM << 18u));
+
+	return 0;
+}
+
+static struct dm_pmic_ops mc34708_ops = {
+	.reg_count = mc34708_reg_count,
+	.read	= mc34708_read,
+	.write	= mc34708_write,
+};
+
+static const struct udevice_id mc34708_ids[] = {
+	{ .compatible = "fsl,mc34708" },
+	{ }
+};
+
+U_BOOT_DRIVER(pmic_mc34708) = {
+	.name		= "mc34708_pmic",
+	.id		= UCLASS_PMIC,
+	.of_match	= mc34708_ids,
+	.probe          = mc34708_probe,
+	.ops		= &mc34708_ops,
+};
-- 
2.11.0

[U-Boot] [PATCH v3 06/11] pmic: Rewrite the pmic command to not only work with single byte transmission

[Lukasz Majewski]

Up till now it was only possible to use 'pmic' command with a single byte
transmission.
The pmic_read|write functions has been replaced with ones, which don't need
the transmission length as a parameter.

Due to that it is possible now to read data from PMICs transmitting more
data than 1 byte at once (e.g. mc34708)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Replace dm_pmic_info with uc_pmic_priv
- Replace pmic_info with priv

Changes in v2:
- New patch

 cmd/pmic.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/cmd/pmic.c b/cmd/pmic.c
index f4b4a3f588..e46d813a70 100644
--- a/cmd/pmic.c
+++ b/cmd/pmic.c
@@ -75,8 +75,9 @@ static int do_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
+	struct uc_pmic_priv *priv;
 	struct udevice *dev;
-	uint8_t value;
+	char fmt[16];
 	uint reg;
 	int ret;
 
@@ -86,12 +87,15 @@ static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 	dev = currdev;
-
+	priv = dev_get_uclass_priv(dev);
 	printf("Dump pmic: %s registers\n", dev->name);
 
+	sprintf(fmt, "%%%d.%dx ", priv->trans_len * 2,
+		priv->trans_len * 2);
+
 	for (reg = 0; reg < pmic_reg_count(dev); reg++) {
-		ret = pmic_read(dev, reg, &value, 1);
-		if (ret) {
+		ret = pmic_reg_read(dev, reg);
+		if (ret < 0) {
 			printf("Can't read register: %d\n", reg);
 			return failure(ret);
 		}
@@ -99,7 +103,7 @@ static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (!(reg % 16))
 			printf("\n0x%02x: ", reg);
 
-		printf("%2.2x ", value);
+		printf(fmt, ret);
 	}
 	printf("\n");
 
@@ -108,9 +112,10 @@ static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 static int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
+	struct uc_pmic_priv *priv;
 	struct udevice *dev;
 	int regs, ret;
-	uint8_t value;
+	char fmt[24];
 	uint reg;
 
 	if (!currdev) {
@@ -119,6 +124,7 @@ static int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 	dev = currdev;
+	priv = dev_get_uclass_priv(dev);
 
 	if (argc != 2)
 		return CMD_RET_USAGE;
@@ -130,13 +136,15 @@ static int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return failure(-EFAULT);
 	}
 
-	ret = pmic_read(dev, reg, &value, 1);
-	if (ret) {
+	ret = pmic_reg_read(dev, reg);
+	if (ret < 0) {
 		printf("Can't read PMIC register: %d!\n", reg);
 		return failure(ret);
 	}
 
-	printf("0x%02x: 0x%2.2x\n", reg, value);
+	sprintf(fmt, "0x%%02x: 0x%%%d.%dx\n", priv->trans_len * 2,
+		priv->trans_len * 2);
+	printf(fmt, reg, ret);
 
 	return CMD_RET_SUCCESS;
 }
@@ -144,9 +152,8 @@ static int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 static int do_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct udevice *dev;
+	uint reg, value;
 	int regs, ret;
-	uint8_t value;
-	uint reg;
 
 	if (!currdev) {
 		printf("First, set the PMIC device!\n");
@@ -167,7 +174,7 @@ static int do_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	value = simple_strtoul(argv[2], NULL, 0);
 
-	ret = pmic_write(dev, reg, &value, 1);
+	ret = pmic_reg_write(dev, reg, value);
 	if (ret) {
 		printf("Can't write PMIC register: %d!\n", reg);
 		return failure(ret);
-- 
2.11.0

[U-Boot] [PATCH v3 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission

[Lukasz Majewski]

This change enables support for MC34708 PMIC in sandbox. Now we can
emulate the I2C transfers larger than 1 byte.

Notable changes for this driver:

- From now on the register number is not equal to index in the buffer,
  which emulates the PMIC registers

- The PMIC register's pool is now dynamically allocated up till
  64 regs * 3 bytes each = 192 B

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Replace pr_err() with debug()
- dm_pmic_info -> uc_pmic_priv

Changes in v2:
- New patch

 drivers/power/pmic/i2c_pmic_emul.c | 45 ++++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 14 deletions(-)

diff --git a/drivers/power/pmic/i2c_pmic_emul.c b/drivers/power/pmic/i2c_pmic_emul.c
index c0b53091cc..61fa76a561 100644
--- a/drivers/power/pmic/i2c_pmic_emul.c
+++ b/drivers/power/pmic/i2c_pmic_emul.c
@@ -18,8 +18,11 @@
  * @reg:    PMICs registers array
  */
 struct sandbox_i2c_pmic_plat_data {
-	u8 rw_reg;
-	u8 reg[SANDBOX_PMIC_REG_COUNT];
+	u8 rw_reg, rw_idx;
+	u8 reg_count;
+	u8 trans_len;
+	u8 buf_size;
+	u8 *reg;
 };
 
 static int sandbox_i2c_pmic_read_data(struct udevice *emul, uchar chip,
@@ -27,16 +30,16 @@ static int sandbox_i2c_pmic_read_data(struct udevice *emul, uchar chip,
 {
 	struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul);
 
-	if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
+	if (plat->rw_idx + len > plat->buf_size) {
 		pr_err("Request exceeds PMIC register range! Max register: %#x",
-		      SANDBOX_PMIC_REG_COUNT);
+		      plat->reg_count);
 		return -EFAULT;
 	}
 
-	debug("Read PMIC: %#x at register: %#x count: %d\n",
-	      (unsigned)chip & 0xff, plat->rw_reg, len);
+	debug("Read PMIC: %#x at register: %#x idx: %#x count: %d\n",
+	      (unsigned int)chip & 0xff, plat->rw_reg, plat->rw_idx, len);
 
-	memcpy(buffer, &plat->reg[plat->rw_reg], len);
+	memcpy(buffer, plat->reg + plat->rw_idx, len);
 
 	return 0;
 }
@@ -53,9 +56,10 @@ static int sandbox_i2c_pmic_write_data(struct udevice *emul, uchar chip,
 
 	/* Set PMIC register for I/O */
 	plat->rw_reg = *buffer;
+	plat->rw_idx = plat->rw_reg * plat->trans_len;
 
-	debug("Write PMIC: %#x at register: %#x count: %d\n",
-	      (unsigned)chip & 0xff, plat->rw_reg, len);
+	debug("Write PMIC: %#x at register: %#x idx: %#x count: %d\n",
+	      (unsigned int)chip & 0xff, plat->rw_reg, plat->rw_idx, len);
 
 	/* For read operation, set (write) only chip reg */
 	if (next_is_read)
@@ -64,12 +68,12 @@ static int sandbox_i2c_pmic_write_data(struct udevice *emul, uchar chip,
 	buffer++;
 	len--;
 
-	if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
+	if (plat->rw_idx + len > plat->buf_size) {
 		pr_err("Request exceeds PMIC register range! Max register: %#x",
-		      SANDBOX_PMIC_REG_COUNT);
+		      plat->reg_count);
 	}
 
-	memcpy(&plat->reg[plat->rw_reg], buffer, len);
+	memcpy(plat->reg + plat->rw_idx, buffer, len);
 
 	return 0;
 }
@@ -100,20 +104,33 @@ static int sandbox_i2c_pmic_xfer(struct udevice *emul, struct i2c_msg *msg,
 static int sandbox_i2c_pmic_ofdata_to_platdata(struct udevice *emul)
 {
 	struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul);
+	struct udevice *pmic_dev = dev_get_parent(emul);
+	struct uc_pmic_priv *priv = dev_get_uclass_priv(pmic_dev);
 	const u8 *reg_defaults;
 
 	debug("%s:%d Setting PMIC default registers\n", __func__, __LINE__);
+	plat->reg_count = pmic_reg_count(pmic_dev);
+	plat->trans_len = priv->trans_len;
+	plat->buf_size = plat->reg_count * plat->trans_len;
+
+	plat->reg = calloc(1, plat->buf_size);
+	if (!plat->reg) {
+		debug("Canot allocate memory (%d B) for PMIC I2C emulation!\n",
+		      plat->buf_size);
+		return -ENOMEM;
+	}
 
 	reg_defaults = dev_read_u8_array_ptr(emul, "reg-defaults",
-					     SANDBOX_PMIC_REG_COUNT);
+					     plat->buf_size);
 
 	if (!reg_defaults) {
 		pr_err("Property \"reg-defaults\" not found for device: %s!",
 		      emul->name);
+		free(plat->reg);
 		return -EINVAL;
 	}
 
-	memcpy(&plat->reg, reg_defaults, SANDBOX_PMIC_REG_COUNT);
+	memcpy(plat->reg, reg_defaults, plat->buf_size);
 
 	return 0;
 }
-- 
2.11.0

[U-Boot] [PATCH v3 08/11] sandbox: Enable support for MC34708 PMIC in DTS

[Lukasz Majewski]

This commit also provides the default values of the emulated MC34708 PMIC
internal registers content.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Fix DTS property style to compy with Device Tree specification
  as suggested by Fabio.

Changes in v2:
- New patch

 arch/sandbox/dts/sandbox.dts       |  4 ++++
 arch/sandbox/dts/sandbox64.dts     |  4 ++++
 arch/sandbox/dts/sandbox_pmic.dtsi | 33 +++++++++++++++++++++++++++++++++
 arch/sandbox/dts/test.dts          |  4 ++++
 4 files changed, 45 insertions(+)

diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 1fb8225fbb..86680a6b11 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -115,6 +115,10 @@
 		sandbox_pmic: sandbox_pmic {
 			reg = <0x40>;
 		};
+
+		mc34708: pmic at 41 {
+			reg = <0x41>;
+		};
 	};
 
 	lcd {
diff --git a/arch/sandbox/dts/sandbox64.dts b/arch/sandbox/dts/sandbox64.dts
index d6efc011de..8f707b47db 100644
--- a/arch/sandbox/dts/sandbox64.dts
+++ b/arch/sandbox/dts/sandbox64.dts
@@ -115,6 +115,10 @@
 		sandbox_pmic: sandbox_pmic {
 			reg = <0x40>;
 		};
+
+		mc34708: pmic at 41 {
+			reg = <0x41>;
+		};
 	};
 
 	lcd {
diff --git a/arch/sandbox/dts/sandbox_pmic.dtsi b/arch/sandbox/dts/sandbox_pmic.dtsi
index 8a85cb9d6c..403656f25e 100644
--- a/arch/sandbox/dts/sandbox_pmic.dtsi
+++ b/arch/sandbox/dts/sandbox_pmic.dtsi
@@ -81,3 +81,36 @@
 		regulator-max-microvolt = <1500000>;
 	};
 };
+
+&mc34708 {
+	compatible = "fsl,mc34708";
+
+	pmic_emul {
+		compatible = "sandbox,i2c-pmic";
+
+		reg-defaults = /bits/ 8 <
+			0x00 0x80 0x08 0xff 0xff 0xff 0x2e 0x01 0x08
+			0x40 0x80 0x81 0x5f 0xff 0xfb 0x1e 0x80 0x18
+			0x00 0x00 0x0e 0x00 0x00 0x14 0x00 0x00 0x00
+			0x00 0x00 0x20 0x00 0x01 0x3a 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00
+			0x42 0x21 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x30 0x5f
+			0x01 0xff 0xff 0x00 0x00 0x00 0x00 0x7f 0xff
+			0x92 0x49 0x24 0x59 0x6d 0x34 0x18 0xc1 0x8c
+			0x00 0x60 0x18 0x51 0x48 0x45 0x14 0x51 0x45
+			0x00 0x06 0x32 0x00 0x00 0x00 0x06 0x9c 0x99
+			0x00 0x38 0x0a 0x00 0x38 0x0a 0x00 0x38 0x0a
+			0x00 0x38 0x0a 0x84 0x00 0x00 0x00 0x00 0x00
+			0x80 0x90 0x8f 0xf8 0x00 0x04 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x01 0x31 0x7e 0x2b 0x03 0xfd 0xc0 0x36 0x1b
+			0x60 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0x00
+		>;
+	};
+};
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 06d0e8ce85..1bb5fb0f0f 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -227,6 +227,10 @@
 		sandbox_pmic: sandbox_pmic {
 			reg = <0x40>;
 		};
+
+		mc34708: pmic at 41 {
+			reg = <0x41>;
+		};
 	};
 
 	adc at 0 {
-- 
2.11.0

[U-Boot] [PATCH v3 09/11] sandbox: Enable MC34708 PMIC support

[Lukasz Majewski]

This MC34708 PMIC is somewhat special - it used single transfers (R/W) with
3 bytes size - up till now U-Boot's PMICs only used 1 byte.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Enable MC34708 PMIC support in sandbox_{flattree|spl}_defconfig

Changes in v2:
- New patch

 configs/sandbox_defconfig          | 1 +
 configs/sandbox_flattree_defconfig | 1 +
 configs/sandbox_spl_defconfig      | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index c1cdd59c54..2fc84a16c9 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -142,6 +142,7 @@ CONFIG_DM_PMIC=y
 CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
+CONFIG_DM_PMIC_MC34708=y
 CONFIG_PMIC_PM8916=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 9b8d033838..e922c4b38f 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -125,6 +125,7 @@ CONFIG_DM_PMIC=y
 CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
+CONFIG_DM_PMIC_MC34708=y
 CONFIG_PMIC_PM8916=y
 CONFIG_PMIC_S2MPS11=y
 CONFIG_DM_PMIC_SANDBOX=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index c308628199..fb6bb4baa2 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -141,6 +141,7 @@ CONFIG_DM_PMIC=y
 CONFIG_PMIC_ACT8846=y
 CONFIG_DM_PMIC_PFUZE100=y
 CONFIG_DM_PMIC_MAX77686=y
+CONFIG_DM_PMIC_MC34708=y
 CONFIG_PMIC_PM8916=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_PMIC_S2MPS11=y
-- 
2.11.0

[U-Boot] [PATCH v3 10/11] sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c

[Lukasz Majewski]

The common code can be excluded to be reused by tests for other PMIC.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- None

Changes in v2:
- New patch

 test/dm/pmic.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/test/dm/pmic.c b/test/dm/pmic.c
index b2061178fc..c24bd3b0a1 100644
--- a/test/dm/pmic.c
+++ b/test/dm/pmic.c
@@ -21,9 +21,9 @@
 #include <test/ut.h>
 
 /* Test PMIC get method */
-static int dm_test_power_pmic_get(struct unit_test_state *uts)
+
+static inline int power_pmic_get(struct unit_test_state *uts, char *name)
 {
-	const char *name = "sandbox_pmic";
 	struct udevice *dev;
 
 	ut_assertok(pmic_get(name, &dev));
@@ -34,6 +34,14 @@ static int dm_test_power_pmic_get(struct unit_test_state *uts)
 
 	return 0;
 }
+
+/* Test PMIC get method */
+static int dm_test_power_pmic_get(struct unit_test_state *uts)
+{
+	power_pmic_get(uts, "sandbox_pmic");
+
+	return 0;
+}
 DM_TEST(dm_test_power_pmic_get, DM_TESTF_SCAN_FDT);
 
 /* Test PMIC I/O */
-- 
2.11.0

[U-Boot] [PATCH v3 11/11] sandbox: tests: Add tests for mc34708 PMIC device

[Lukasz Majewski]

Following tests has been added for mc34708 device:

- get_test for mc34708 PMIC
- Check if proper number of registers is read
- Check if default (emulated via i2c device) value is properly read
- Check if value write/read operation is correct
- Perform tests to check if pmic_clrsetbits() is working correctly

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

---

Changes in v3:
- Fix pmic.c test code after adjusting the sandbox PMIC related dts

Changes in v2:
- New patch

 test/dm/pmic.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/test/dm/pmic.c b/test/dm/pmic.c
index c24bd3b0a1..b582329a9c 100644
--- a/test/dm/pmic.c
+++ b/test/dm/pmic.c
@@ -19,6 +19,7 @@
 #include <power/pmic.h>
 #include <power/sandbox_pmic.h>
 #include <test/ut.h>
+#include <fsl_pmic.h>
 
 /* Test PMIC get method */
 
@@ -44,6 +45,16 @@ static int dm_test_power_pmic_get(struct unit_test_state *uts)
 }
 DM_TEST(dm_test_power_pmic_get, DM_TESTF_SCAN_FDT);
 
+/* PMIC get method - MC34708 - for 3 bytes transmission */
+static int dm_test_power_pmic_mc34708_get(struct unit_test_state *uts)
+{
+	power_pmic_get(uts, "pmic at 41");
+
+	return 0;
+}
+
+DM_TEST(dm_test_power_pmic_mc34708_get, DM_TESTF_SCAN_FDT);
+
 /* Test PMIC I/O */
 static int dm_test_power_pmic_io(struct unit_test_state *uts)
 {
@@ -72,3 +83,48 @@ static int dm_test_power_pmic_io(struct unit_test_state *uts)
 	return 0;
 }
 DM_TEST(dm_test_power_pmic_io, DM_TESTF_SCAN_FDT);
+
+#define MC34708_PMIC_REG_COUNT 64
+#define MC34708_PMIC_TEST_VAL 0x125534
+static int dm_test_power_pmic_mc34708_regs_check(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	int reg_count;
+
+	ut_assertok(pmic_get("pmic at 41", &dev));
+
+	/* Check number of PMIC registers */
+	reg_count = pmic_reg_count(dev);
+	ut_asserteq(reg_count, MC34708_PMIC_REG_COUNT);
+
+	return 0;
+}
+
+DM_TEST(dm_test_power_pmic_mc34708_regs_check, DM_TESTF_SCAN_FDT);
+
+static int dm_test_power_pmic_mc34708_rw_val(struct unit_test_state *uts)
+{
+	struct udevice *dev;
+	int val;
+
+	ut_assertok(pmic_get("pmic at 41", &dev));
+
+	/* Check if single 3 byte read is successful */
+	val = pmic_reg_read(dev, REG_POWER_CTL2);
+	ut_asserteq(val, 0x422100);
+
+	/* Check if RW works */
+	val = 0;
+	ut_assertok(pmic_reg_write(dev, REG_RTC_TIME, val));
+	ut_assertok(pmic_reg_write(dev, REG_RTC_TIME, MC34708_PMIC_TEST_VAL));
+	val = pmic_reg_read(dev, REG_RTC_TIME);
+	ut_asserteq(val, MC34708_PMIC_TEST_VAL);
+
+	pmic_clrsetbits(dev, REG_POWER_CTL2, 0x3 << 8, 1 << 9);
+	val = pmic_reg_read(dev, REG_POWER_CTL2);
+	ut_asserteq(val, (0x422100 & ~(0x3 << 8)) | (1 << 9));
+
+	return 0;
+}
+
+DM_TEST(dm_test_power_pmic_mc34708_rw_val, DM_TESTF_SCAN_FDT);
-- 
2.11.0

[U-Boot] [PATCH v3 01/11] pmic: fsl: Provide some more definitions for MC34708 PMIC

[Simon Glass]

On 15 May 2018 at 08:26, Lukasz Majewski <lukma@denx.de> wrote:
> This commit adds some more defines for MC34708 PMIC.
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> ---
>
> Changes in v3:
> - None
>
> Changes in v2:
> - None
>
>  include/fsl_pmic.h | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>

Reviewed-by: Simon Glass <sjg@chromium.org>

[U-Boot] [PATCH v3 05/11] pmic: dm: Add support for MC34708 for PMIC DM

[Simon Glass]

On 15 May 2018 at 08:26, Lukasz Majewski <lukma@denx.de> wrote:
> This patch adds support for MC34708 PMIC, to be used with driver model
> (DM).
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> ---
>
> Changes in v3:
> - Rename dm_pmic_info with uc_pmic_priv
> - Sort alphabetically includes
> - Add comment regarding MC34708 byte ordering
>
> Changes in v2:
> - Support for uclass private data with trasfer length
>
>  drivers/power/pmic/Kconfig   |   7 +++
>  drivers/power/pmic/Makefile  |   1 +
>  drivers/power/pmic/mc34708.c | 105 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 113 insertions(+)
>  create mode 100644 drivers/power/pmic/mc34708.c

Reviewed-by: Simon Glass <sjg@chromium.org>