From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/20] usb: hub: Send correct wValue to get hub descriptor of a USB 3.0 hub
Date: Fri, 16 Jun 2017 21:43:53 -0600 [thread overview]
Message-ID: <CAPnjgZ1eRB3-FMb2f12VUNU=etRh-hd3EfUjgc=djuXE3s4BEQ@mail.gmail.com> (raw)
In-Reply-To: <1497619909-29454-7-git-send-email-bmeng.cn@gmail.com>
On 16 June 2017 at 07:31, Bin Meng <bmeng.cn@gmail.com> wrote:
> Testing a USB 3.0 hub by connecting it to the xHCI port on Intel
> MinnowMax, when issuing 'get hub descriptor' to the hub, xHCI
> reports a transfer event TRB with a completion code 6 which means
> 'Stall Error'.
>
> In fact super speed USB hub descriptor type is 0x2a, not 0x29.
> Sending correct SETUP packet to the hub makes it not stall anymore.
>
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
> ---
>
> common/usb_hub.c | 12 +++++++++++-
> drivers/usb/host/xhci.c | 1 +
> include/usb_defs.h | 1 +
> 3 files changed, 13 insertions(+), 1 deletion(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
next prev parent reply other threads:[~2017-06-17 3:43 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 13:31 [U-Boot] [PATCH 00/20] usb: xhci: Fix USB xHCI support on Intel platform Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 01/20] usb: xhci: Remove incorrect comments for struct xhci_container_ctx Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 02/20] usb: xhci: Correct command TRB 4th dword initialization Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 03/20] usb: xhci: Initialize scratchpad buffer array and scratchpad buffers Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 04/20] usb: xhci: Add input slot context in xhci_set_configuration() Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 05/20] usb: hub: Update handling connect status/change in usb_scan_port() Bin Meng
2017-06-16 14:19 ` Marek Vasut
2017-06-20 15:18 ` Dinh Nguyen
2017-06-16 13:31 ` [U-Boot] [PATCH 06/20] usb: hub: Send correct wValue to get hub descriptor of a USB 3.0 hub Bin Meng
2017-06-17 3:43 ` Simon Glass [this message]
2017-06-16 13:31 ` [U-Boot] [PATCH 07/20] usb: hub: Revise wLength for 'get port status' request Bin Meng
2017-06-17 3:43 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 08/20] usb: hub: Change USB hub descriptor to match USB 3.0 hubs Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 09/20] usb: hub: Add 3.0 hub port status mask of 2.0 hub Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 10/20] usb: xhci: Change MAX_HC_PORTS to 255 Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 11/20] usb: xhci: Get rid of CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 12/20] configs: Remove CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS in all boards Bin Meng
2017-06-16 14:06 ` Bin Meng
2017-06-21 12:13 ` Stefan Roese
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 13/20] usb: ehci: Get rid of CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 14/20] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards Bin Meng
2017-06-16 14:09 ` Bin Meng
2017-06-21 12:13 ` Stefan Roese
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 15/20] usb: cmd: Print actual packet size for super speed devices Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 16/20] usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 17/20] x86: minnowmax: Configure GPIO pins to turn on USB ports VBUS Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-17 13:41 ` Bin Meng
2017-06-22 6:44 ` Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 18/20] x86: minnowmax: Add a environment variable for USB power-on delay Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-16 13:31 ` [U-Boot] [PATCH 19/20] x86: minnowmax: Enable USB xHCI support Bin Meng
2017-06-17 3:44 ` Simon Glass
2017-06-17 13:43 ` Bin Meng
2017-06-16 13:31 ` [U-Boot] [PATCH 20/20] x86: Remove CONFIG_USB_MAX_CONTROLLER_COUNT Bin Meng
2017-06-17 3:45 ` Simon Glass
2017-06-22 6:44 ` Bin Meng
2017-06-16 13:42 ` [U-Boot] [PATCH 00/20] usb: xhci: Fix USB xHCI support on Intel platform Bin Meng
2017-06-16 14:21 ` Marek Vasut
2017-06-16 14:29 ` Stefan Roese
2017-06-21 9:28 ` Stefan Roese
2017-06-21 10:24 ` Bin Meng
2017-06-21 12:07 ` Stefan Roese
2017-06-21 12:44 ` Bin Meng
2017-06-22 6:32 ` Bin Meng
2017-06-21 12:10 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAPnjgZ1eRB3-FMb2f12VUNU=etRh-hd3EfUjgc=djuXE3s4BEQ@mail.gmail.com' \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.