From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Sat, 19 Nov 2011 09:57:53 -0800 Subject: [U-Boot] [PATCH 4/9] ARM: pleb2: re-add MACH_TYPE_PLEB2 In-Reply-To: <1321703956-4224-5-git-send-email-agust@denx.de> References: <1321703956-4224-1-git-send-email-agust@denx.de> <1321703956-4224-5-git-send-email-agust@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin wrote: > MACH_TYPE_PLEB2 was removed from mach-types.h. > Add it to the board config file. > > Signed-off-by: Anatolij Gustschin I built this and it fixes the failure. I did not test on hardware. Acked-by: Simon Glass > --- > ?board/pleb2/pleb2.c ? ? | ? ?3 --- > ?include/configs/pleb2.h | ? ?3 +++ > ?2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c > index 5a16cc7..ebb6180 100644 > --- a/board/pleb2/pleb2.c > +++ b/board/pleb2/pleb2.c > @@ -40,9 +40,6 @@ int board_init (void) > ? ? ? ?dcache_disable(); > ? ? ? ?icache_disable(); > > - ? ? ? /* arch number of Lubbock-Board */ > - ? ? ? gd->bd->bi_arch_number = MACH_TYPE_PLEB2; > - > ? ? ? ?/* adress of boot parameters */ > ? ? ? ?gd->bd->bi_boot_params = 0xa0000100; > > diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h > index 2aeb7fb..4031d61 100644 > --- a/include/configs/pleb2.h > +++ b/include/configs/pleb2.h > @@ -43,6 +43,9 @@ > > ?#undef CONFIG_USE_IRQ ? ? ? ? ? ? ? ? ?/* we don't need IRQ/FIQ stuff */ > > +#define MACH_TYPE_PLEB2 ? ? ? ? ? ? ? ?587 > +#define CONFIG_MACH_TYPE ? ? ? MACH_TYPE_PLEB2 > + > ?/* we will never enable dcache, because we have to setup MMU first */ > ?#define CONFIG_SYS_DCACHE_OFF > > -- > 1.7.5.4 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >