[U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image

[Simon Glass <sjg@chromium.org>]

Hi York,

On 3 September 2015 at 09:07, York Sun <yorksun@freescale.com> wrote:
> FIT image supports more than 32 bits in addresses by using #address-cell
> field. However the address length is not handled when parsing FIT images.
> Beside, the variable used to host address has "ulong" type. It is OK for
> the target, but not always enough for host tools such as mkimage. This
> patch replaces "ulong" with "phys_addr_t" to make sure the address is
> correct for both the target and the host.
>
> Signed-off-by: York Sun <yorksun@freescale.com>
>
> ---
>
> Changes in v2:
>   Make a common function for both load and entry addresses.
>   Simplify calculation of addresses in a similar way as fdtdec_get_number()
>   fdtdec_get_number() is not used, or too many files need to be included
>     and/or twisted for host tool
>   Continue to use %08llx for print format for load and entry addresses
>     because %pa does not always work for host tool (mkimage)
>
>  common/bootm.c     |   13 +++++----
>  common/image-fit.c |   79 ++++++++++++++++++++++++++++------------------------
>  include/bootm.h    |    6 ++--
>  include/image.h    |   12 +++++---
>  4 files changed, 61 insertions(+), 49 deletions(-)
>
> diff --git a/common/bootm.c b/common/bootm.c
> index 667c934..0672e73 100644
> --- a/common/bootm.c
> +++ b/common/bootm.c
> @@ -325,9 +325,9 @@ static int handle_decomp_error(int comp_type, size_t uncomp_size,
>         return BOOTM_ERR_RESET;
>  }
>
> -int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
> -                      void *load_buf, void *image_buf, ulong image_len,
> -                      uint unc_len, ulong *load_end)
> +int bootm_decomp_image(int comp, phys_addr_t load, phys_addr_t image_start,
> +                      int type, void *load_buf, void *image_buf,
> +                      ulong image_len, uint unc_len, ulong *load_end)
>  {
>         int ret = 0;
>
> @@ -883,7 +883,8 @@ void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
>  static int bootm_host_load_image(const void *fit, int req_image_type)
>  {
>         const char *fit_uname_config = NULL;
> -       ulong data, len;
> +       phys_addr_t *data = NULL;
> +       ulong len;
>         bootm_headers_t images;
>         int noffset;
>         ulong load_end;
> @@ -897,7 +898,7 @@ static int bootm_host_load_image(const void *fit, int req_image_type)
>         noffset = fit_image_load(&images, (ulong)fit,
>                 NULL, &fit_uname_config,
>                 IH_ARCH_DEFAULT, req_image_type, -1,
> -               FIT_LOAD_IGNORED, &data, &len);
> +               FIT_LOAD_IGNORED, data, &len);
>         if (noffset < 0)
>                 return noffset;
>         if (fit_image_get_type(fit, noffset, &image_type)) {
> @@ -912,7 +913,7 @@ static int bootm_host_load_image(const void *fit, int req_image_type)
>
>         /* Allow the image to expand by a factor of 4, should be safe */
>         load_buf = malloc((1 << 20) + len * 4);
> -       ret = bootm_decomp_image(imape_comp, 0, data, image_type, load_buf,
> +       ret = bootm_decomp_image(imape_comp, 0, *data, image_type, load_buf,
>                                  (void *)data, len, CONFIG_SYS_BOOTM_LEN,
>                                  &load_end);
>         free(load_buf);
> diff --git a/common/image-fit.c b/common/image-fit.c
> index 28f7aa8..7a0c9a9 100644
> --- a/common/image-fit.c
> +++ b/common/image-fit.c
> @@ -358,7 +358,7 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
>         char *desc;
>         uint8_t type, arch, os, comp;
>         size_t size;
> -       ulong load, entry;
> +       phys_addr_t load, entry;
>         const void *data;
>         int noffset;
>         int ndepth;
> @@ -428,17 +428,17 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
>                 if (ret)
>                         printf("unavailable\n");
>                 else
> -                       printf("0x%08lx\n", load);
> +                       printf("0x%08llx\n", (uint64_t)load);
>         }
>
>         if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
>             (type == IH_TYPE_RAMDISK)) {
> -               fit_image_get_entry(fit, image_noffset, &entry);
> +               ret = fit_image_get_entry(fit, image_noffset, &entry);
>                 printf("%s  Entry Point:  ", p);
>                 if (ret)
>                         printf("unavailable\n");
>                 else
> -                       printf("0x%08lx\n", entry);
> +                       printf("0x%08llx\n", (uint64_t)entry);

Yes of course %pa does not work on the host - I didn't think of that.

I'm still not thrilled with everything being promoted to 64-bit. Do
you think using a #define in inttypes.h or similar might work, similar
to how LBAF works in ide.h?

#if BITS_PER_LONG == 64
#define PRIpa "%08l"
#else
#define PRIpa "%08l"
#endif

The odd thing is that they are both the same for ARM (unsigned long).
What arch are you using?

[snip]

Regards,
Simon