From mboxrd@z Thu Jan  1 00:00:00 1970
From: Simon Glass <sjg@chromium.org>
Date: Tue, 22 Jan 2013 06:51:58 -0800
Subject: [U-Boot] [PATCH 1/7] EXYNOS5: Add function to enable XXTI clock
	source
In-Reply-To: <1358765559-32709-2-git-send-email-rajeshwari.s@samsung.com>
References: <1358765559-32709-1-git-send-email-rajeshwari.s@samsung.com>
	<1358765559-32709-2-git-send-email-rajeshwari.s@samsung.com>
Message-ID: <CAPnjgZ2YJRYA7PAs9r8jOozf60zCJHJvuJo+hupsUD94NFx5aw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Rajeshwari,

On Mon, Jan 21, 2013 at 2:52 AM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch adds funtion to enable XXTI clock source
> required by MAX98095 codec.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
>  arch/arm/cpu/armv7/exynos/power.c        |   11 +++++++++++
>  arch/arm/include/asm/arch-exynos/power.h |   10 ++++++++++
>  2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
> index 8572cfd..8de30c1 100644
> --- a/arch/arm/cpu/armv7/exynos/power.c
> +++ b/arch/arm/cpu/armv7/exynos/power.c
> @@ -105,3 +105,14 @@ void power_ps_hold_setup(void)
>         setbits_le32(&power->ps_hold_control,
>                         EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
>  }
> +
> +
> +void power_enable_xclkout(void)
> +{
> +       struct exynos5_power *power =
> +               (struct exynos5_power *)samsung_get_base_power();
> +
> +       /* use xxti for xclk out */
> +       clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
> +                               PMU_DEBUG_XXTI);
> +}
> diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
> index 85e2cd9..f0eab16 100644
> --- a/arch/arm/include/asm/arch-exynos/power.h
> +++ b/arch/arm/include/asm/arch-exynos/power.h
> @@ -872,4 +872,14 @@ void set_dp_phy_ctrl(unsigned int enable);
>   * (e.g. power button).
>   */
>  void power_ps_hold_setup(void);
> +
> +/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI
> + * clock source */
> +#define PMU_DEBUG_XXTI                          0x1000
> +/* Mask bit[12:8] for xxti clock selection */
> +#define PMU_DEBUG_CLKOUT_SEL_MASK               0x1f00
> +
> +/* pmu debug is used for xclkout, enable xclkout with
> + * source as XXTI */

Multi-line comment style?

> +void power_enable_xclkout(void);
>  #endif
> --
> 1.7.4.4
>

Regards,
Simon