From: Peter Sabat <pete@sablalik.us>
To: Ben Greear <greearb@candelatech.com>
Cc: ath10k@lists.infradead.org
Subject: Re: basic help request
Date: Thu, 12 Jun 2014 00:58:05 -0400 [thread overview]
Message-ID: <CFBEA45B.B25BF%pete@sablalik.us> (raw)
In-Reply-To: <5399261C.9010906@candelatech.com>
So I grabbed it again - I just did a wget before, maybe something got
garbled there.
Thanks again for the help though.
But we have some progress it seems:
[Thu Jun 12 00:28:49 2014] ath10k_pci 0000:03:00.0: BAR 0: assigned [mem
0x90400000-0x905fffff 64bit]
[Thu Jun 12 00:28:49 2014] ath10k_pci 0000:03:00.0: irq 116 for MSI/MSI-X
[Thu Jun 12 00:28:49 2014] ath10k: pci irq MSI
[Thu Jun 12 00:28:50 2014] ath10k: qca988x hw2.0 (0x4100016c) fw
10.1.467.2-1 api 2 htt 2.1
[Thu Jun 12 00:28:51 2014] ath: EEPROM regdomain: 0x0
[Thu Jun 12 00:28:51 2014] ath: EEPROM indicates default country code
should be used
[Thu Jun 12 00:28:51 2014] ath: doing EEPROM country->regdmn map search
[Thu Jun 12 00:28:51 2014] ath: country maps to regdmn code: 0x3a
[Thu Jun 12 00:28:51 2014] ath: Country alpha2 being used: US
[Thu Jun 12 00:28:51 2014] ath: Regpair used: 0x3a
additionally :
root@server2:~/build/ath-master/drivers/net/wireless/ath/ath10k# hostapd
/etc/hostapd/test.conf
Configuration file: /etc/hostapd/test.conf
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
ACS: Automatic channel selection started, this may take a bit
wlan0: interface state COUNTRY_UPDATE->ACS
wlan0: ACS-STARTED
wlan0: ACS-COMPLETED freq=5220 channel=44
wlan0: interface state ACS->HT_SCAN
Using interface wlan0 with hwaddr 04:f0:21:0c:a6:5c and ssid "ath10k-test"
wlan0: interface state HT_SCAN->ENABLED
wlan0: AP-ENABLED
info still shows old FW though :
root@server2:/lib/firmware/ath10k/QCA988X/hw2.0# modinfo ath10k_pci
filename:
/lib/modules/3.14.4-scst/updates/drivers/net/wireless/ath/ath10k/ath10k_pci
.ko
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/otp.bin
firmware: ath10k/QCA988X/hw2.0/firmware.bin
license: Dual BSD/GPL
description: Driver support for Atheros QCA988X PCIe devices
author: Qualcomm Atheros
version: backported from Linux (v3.15-rc1-0-gc9eaa44) using
backports v3.15-rc1-1-0-g2a25483
srcversion: 2F02C56BB696ECC1D986D19
alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i*
depends: ath10k_core,compat
vermagic: 3.14.4-scst SMP mod_unload modversions
parm: ath10k_target_ps:Enable ath10k Target (SoC) PS option
(uint)
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
But still no SSID visible!! argh
Have the .conf at bare minimum
ctrl_interface=/var/run/hostapd
country_code=US
bridge=br0
interface=wlan0
driver=nl80211
ssid=ath10k-test
hw_mode=a
channel=44
ieee80211n=1
root@server2:/etc/hostapd# hostapd -d /etc/hostapd/test2.conf
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd/test2.conf
rfkill: initial event: idx=6 type=1 op=0 soft=0 hard=0
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: interface wlan0 in phy phy6
nl80211: Set mode ifindex 10 iftype 3 (AP)
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x1a0a480
nl80211: Register frame type=0xb0 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0x0 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0x20 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0xa0 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0xc0 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0xd0 nl_handle=0x1a0a480 match=
nl80211: Register frame type=0x40 nl_handle=0x1a0a480 match=
nl80211: Add own interface ifindex 4
nl80211: if_indices[16]: 4
nl80211: Add own interface ifindex 10
nl80211: if_indices[16]: 4 10
nl80211: Adding interface wlan0 into bridge br0
phy: phy6
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code US, new country code US
nl80211: Regulatory information - country=US
nl80211: 2402-2472 @ 40 MHz 30 mBm
nl80211: 5170-5250 @ 80 MHz 17 mBm
nl80211: 5250-5330 @ 80 MHz 23 mBm (DFS)
nl80211: 5735-5835 @ 80 MHz 30 mBm
nl80211: 57240-63720 @ 2160 MHz 40 mBm
hw vht capab: 0x338001b2, conf vht capab: 0x0
Completing interface initialization
Mode: IEEE 802.11a Channel: 44 Frequency: 5220 MHz
DFS 0 channels required radar detection
nl80211: Set freq 5220 (ht_enabled=1, vht_enabled=0, bandwidth=20 MHz,
cf1=5220 MHz, cf2=0 MHz)
RATE[0] rate=60 flags=0x1
RATE[1] rate=90 flags=0x0
RATE[2] rate=120 flags=0x1
RATE[3] rate=180 flags=0x0
RATE[4] rate=240 flags=0x1
RATE[5] rate=360 flags=0x0
RATE[6] rate=480 flags=0x0
RATE[7] rate=540 flags=0x0
hostapd_setup_bss(hapd=0x1a099d0 (wlan0), first=1)
wlan0: Flushing old station entries
nl80211: flush -> DEL_STATION wlan0 (all)
wlan0: Deauthenticate all stations
nl80211: send_mlme - noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0
fc=0xc0 nlmode=3
nl80211: send_mlme -> send_frame
nl80211: send_frame - Use bss->freq=5220
nl80211: send_frame -> send_frame_cmd
nl80211: Frame command failed: ret=-16 (Device or resource busy)
(freq=5220 wait=0)
wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=0
set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=1
set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=2
set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=10 (wlan0) alg=0 addr=(nil) key_idx=3
set_tx=0 seq_len=0 key_len=0
Using interface wlan0 with hwaddr 04:f0:21:0c:a6:5c and ssid "ath10k-test"
nl80211: Set beacon (beacon_set=0)
nl80211: Beacon head - hexdump(len=62): 80 00 00 00 ff ff ff ff ff ff 04
f0 21 0c a6 5c 04 f0 21 0c a6 5c 00 00 00 00 00 00 00 00 00 00 64 00 01 00
00 0b 61 74 68 31 30 6b 2d 74 65 73 74 01 08 8c 12 98 24 b0 48 60 6c 03 01
2c
nl80211: Beacon tail - hexdump(len=88): 2d 1a 0c 00 1b ff ff ff 00 00 00
00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 2c 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 00 00 00 00
40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32
2f 00
nl80211: ifindex=10
nl80211: beacon_int=100
nl80211: dtim_period=2
nl80211: ssid - hexdump_ascii(len=11):
61 74 68 31 30 6b 2d 74 65 73 74 ath10k-test
nl80211: hidden SSID not in use
nl80211: privacy=0
nl80211: auth_algs=0x3
nl80211: wpa_version=0x0
nl80211: key_mgmt_suites=0x2
nl80211: pairwise_ciphers=0x1
nl80211: group_cipher=0x1
nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40
nl80211: Set wlan0 operstate 0->1 (UP)
netlink: Operstate: ifindex=10 linkmode=-1 (no change), operstate=6
(IF_OPER_UP)
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED
wlan0: Setup of interface done.
ctrl_iface not configured!
random: Got 18/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0
ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0
ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=2 linkmode=0 master=4
ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=2
ifi_flags=0x1003 ([UP])
nl80211: Add ifindex 4 for bridge br0
nl80211: Add own interface ifindex 4
nl80211: ifindex 4 already in the list
RTM_NEWLINK: ifi_index=4 ifname=br0 operstate=6 linkmode=0
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
wlan0: Event INTERFACE_STATUS (5) received
Unknown event 5
RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
nl80211: Add ifindex 4 for bridge br0
nl80211: Add own interface ifindex 4
nl80211: ifindex 4 already in the list
RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
nl80211: Add ifindex 4 for bridge br0
nl80211: Add own interface ifindex 4
nl80211: ifindex 4 already in the list
RTM_NEWLINK: ifi_index=10 ifname=wlan0 master=4 operstate=6
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
nl80211: Add ifindex 4 for bridge br0
nl80211: Add own interface ifindex 4
nl80211: ifindex 4 already in the list
RTM_NEWLINK: ifi_index=10 ifname=wlan0 operstate=6 linkmode=0 master=4
ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
random: Got 2/2 bytes from /dev/random
On 6/12/14, 12:01 AM, "Ben Greear" <greearb@candelatech.com> wrote:
>
>
>On 06/11/2014 04:46 PM, Peter Sabat wrote:
>> As instructed :)
>>
>>
>>
>> -rwxr-xr-x 1 root root 24347 Jun 11 19:32 firmware-2.bin
>> -rwxr-xr-x 1 root root 2116 Jan 30 08:41 board.bin
>> -rwxr-xr-x 1 root root 249093 Jan 30 08:41 firmware.bin
>> -rwxr-xr-x 1 root root 5402 Jan 30 08:41 otp.bin
>
>That firmware-2.bin looks way too small, should be around 200kbytes.
>
>Where did you get it from?
>
>Thanks,
>Ben
>
>--
>Ben Greear <greearb@candelatech.com>
>Candela Technologies Inc http://www.candelatech.com
>
>_______________________________________________
>ath10k mailing list
>ath10k@lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/ath10k
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-06-12 4:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-11 23:12 basic help request Peter Sabat
2014-06-11 23:27 ` Ben Greear
2014-06-11 23:46 ` Peter Sabat
2014-06-12 4:01 ` Ben Greear
2014-06-12 4:58 ` Peter Sabat [this message]
2014-06-12 5:07 ` Ben Greear
2014-06-12 18:49 ` Peter Sabat
2014-06-13 18:07 ` Ben Greear
2014-06-13 18:38 ` Peter Sabat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CFBEA45B.B25BF%pete@sablalik.us \
--to=pete@sablalik.us \
--cc=ath10k@lists.infradead.org \
--cc=greearb@candelatech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.