From mboxrd@z Thu Jan  1 00:00:00 1970
From: li yuqian <liyuqian08@outlook.com>
Date: Mon, 13 Apr 2015 06:00:15 +0000
Subject: [U-Boot] Compile minnowboard max error
In-Reply-To: <COL128-W609114B0AB3F95DD649A6CAF90@phx.gbl>
References: <COL128-W3606F562608A9927EA326FCAF90@phx.gbl>,
 <COL128-W609114B0AB3F95DD649A6CAF90@phx.gbl>
Message-ID: <COL128-W662561570B5906003C5FC2CAE70@phx.gbl>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Any one can help me figure out what is the wrong for that, is that a bug?Thank you

> From: liyuqian08 at outlook.com
> To: u-boot at lists.denx.de
> Date: Sat, 11 Apr 2015 14:17:37 +0000
> Subject: Re: [U-Boot] Compile minnowboard max error
> 
> i found following command was wrong:
> 
> 
> 
> 
> 
> 
> 
> ./tools/ifdtool -f 0:./u-boot.dtb -m 0xfff016d4 -U 0xfff00000:./u-boot.bin -w 0xfffff800:./u-boot-x86-16bit.bin -w 0xfffc0000:./board/intel/minnowmax/"fsp.bin" -w 0xfff90000:./board/intel/minnowmax/"vga.bin" u-boot.tmp
> Output file is too small. (8388608 < -2138725465)
> is this mean somewhere address was mistake?
> > From: liyuqian08 at outlook.com
> > To: u-boot at lists.denx.de
> > Date: Sat, 11 Apr 2015 13:48:29 +0000
> > Subject: [U-Boot] Compile minnowboard max error
> > 
> > Hi 
> > I am trying compiling uboot for the Minnowboard MAX, but always got following error
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > --------------------Output file is too small. (8388608 < -2138725469)
> > Makefile:1037: recipe for target 'u-boot.rom' failed
> > make: *** [u-boot.rom] Error 1--------------------
> > is this a bug ? i used git master version.
> > Thank you 		 	   		  
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
>  		 	   		  
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot