From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas MARCHESSEAU Subject: Re: RAID 5 "magicaly" become a RAID0 Date: Mon, 13 Apr 2015 14:27:48 +0200 Message-ID: References: <552B0B58.8050102@turmel.org> <552BA12C.3010506@turmel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <552BA12C.3010506@turmel.org> Sender: linux-raid-owner@vger.kernel.org To: Phil Turmel , linux-raid@vger.kernel.org Cc: Roger Heflin List-Id: linux-raid.ids Hi Phil, >{ Convention on kernel.org is to reply-to-all, trim quotes, and place >your response inline or at the bottom. } Ok, sorry thanks , i=B9ll do it > >Hmmm. Based on the below, this should have worked. Please report your >mdadm version. Your kernel appears to be 3.16.0. There have been som= e >assembly bugs fixed in the past year. You will certainly want to try >with a recent livecd before giving up on --assemble --force. Yep , the Kernel is 3.16.0-34-generic, 64bits mdadm -V mdadm - v3.3 - 3rd September 2013 =20 >Wait! One thing at a time. First we must recover your array and help >you get a better backup. Then you may add another drive to make a rai= d6. Yeah of course , i=B9ll do that later ;) , i really want to recove m= y kids picture :) at 1st , my own dev , and other less important crap . > >Very good. Some of your devices have SMART disabled. You should enab= le >those, and re-do the smart report for them. /dev/sdb: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebro:0 (loal to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Raid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 G) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Supe Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clean Device UUID : 3c496797:3cf85a2f:295fbd9b:2e077213 Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 06:10:59 215 Bad Block Log : 512 entries available at offset 72 sectors Checksum : 15dbf80e - correct Events : 21958 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 5 Array State : AAAA.A. ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital RE4 (SATA 6Gb/s) Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P191161 LU WWN Device Id: 5 0014ee 25ee4fcd6 =46irmware Version: 01.01K02 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Secto Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Versio is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Apr 13 13:32:002015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDAT= ED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Alway= s - 0 3 Spin_Up_Time 0x0027 171 171 021 Pre-fail Alway= s - 6450 4 Start_Stop_Count 0x0032 100 100 000 Old_age Alway= s - 7 5 Reallocated_Sector_Ct 0x0033 200 200 140 Prefail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Alway= s - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Alway= s - 566 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Alway= s - 7 183 untime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 200 00 000 Old_age Always - 4 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Alway= s - 2 194 Temperature_Celsius 0x0022 115 109 000 Old_age Alway= s - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Alway= s - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Alway= s - 0 198 Offline_Unorrectable 0x0030 200 200 000 Old_age Offlin= e - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Alway= s - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offli= ne - 0 SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) /dev/sdc: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebro:0 (local to host Cerebro) Creation Time : Sa Feb 7 23:02:47 2015 Raid Level : raid5 Raid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clan Device UUID : 8df5ff53:7e7b70cd:8f4f00f1:62d06766 Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 06:10:59 2015 Bad Block Log : 512 entries available at offset 72 sectors Checksum : 18c2e134 - corrct Events : 21958 Layout : left-symmetric Chunk Size : 512 Device Role : Active device 0 Array State : AAAA.A. ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital RE4 (SATA 6Gb/s Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P1097832 LU WWN Device Id: 5 0014ee 2b4399815 =46irmware Version: 01.01K02 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] Device is: n smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor reision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 13 13:32:00 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributs with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDAT= ED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Alway= s - 0 3 Spin_Up_Time 0x0027 166 165 021 Pre-fail Alway= s - 6691 4 Start_Stop_Count 0x0032 100 100 000 Old_age Alway= s - 44 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Alays - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Aways - 0 9 Power_On_Hours 0x0032 089 089 000 Old_age Alway= s - 8301 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Alway= s - 43 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Alway= s - 0 192 Power-Off_Retract_ount 0x0032 200 200 000 Old_age Always - 30 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Alway= s - 13 194 Temperature_Celsius 0x0022 101 090 000 Old_age Alway= s - 49 196 Reallocated_Event_Count0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x003 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 20 000 Old_age Offlin= e - 0 SCT Error Recovery Control: Rad: 70 (7.0 seconds) Write: 70 (7.0 seconds) /dev/sdd: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebro:0 (lcal to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Rid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Usd Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clean Device UUID : ce00382c:1af27788:00df454:44e23f65 Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 0610:59 2015 Bad Block Log : 512 entries available at offset 72 sectors Checksum : ecec264 - correct Events : 21958 Layout : left-symmetric Chunk Size : 512K Device Role : Active device=20 Array State : AAAA.A. ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontoos.= org =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital E4 (SATA 6Gb/s) Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P1097658 LU WWN Device Id: 5 0014ee 2098fea8e =46irmware Version: 01.01K02 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revsion not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Tie is: Mon Apr 13 13:32:00 2015 CEST SMART support is: Available - device has SMARTcapability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMAR Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with hresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDAT= ED HEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 161 159 021 Pre-fail Alway= s - 6933 4 Start_Stop_Count 0x0032 100 100 000 Old_age Alway= s - 43 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Alway= s - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Alway= s - 0 9 Power_On_Hours 0x0032 089 089 000 Old_age Alway= s - 8301 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Rety_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cyce_Count 0x0032 100 100 000 Old_age Always - 42 183 Rutime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 92 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Alway= s - 13 194 Temperature_Celsius 0x0022 099 091 000 Old_age Alway= s - 51 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Alway= s - 0 197 Current_Pending_Sector 0x002 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Alway= s - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 ld_age Offlin= e - 0 SCT Error Recovery Control: Read: 70 (7.0 secods) Write: 70 (7.0 seconds) /dev/sde: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Nme : Cerebro:0 (local to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Raid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 000.26 GB) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectos Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clean Device UUID : c31958a3:769ae8c1:c61003a:8ac4ced9 Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 0:10:59 2015 Bad Block Log : 512 entries available at offset 72 sectors Checksum : 18fad9c3 - correct Events : 21958 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 2 Array State : AAAA.A. ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) martctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Alle, Christian Franke, www.smartmontools.= org =3D=3D=3D START OF INFORMATION SECTION =3D=3D Model Family: Western Digital RE4 (SATA 6Gb/s) Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P1111248 LU WWN Device Id: 5 0014ee 2b43abede =46irmware Version: 01.01K02 User Capacity: 2,000398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 13 13:32:00 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDAT= ED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Alway= s - 0 3 Spin_Up_Time 0x0027 174 169 021 Pre-fail Alway= s - 6266 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 45 5 Reallocated_Sector_Ct 0x0033 200 200 140 re-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 00 Old_age Always - 0 9 Power_On_Hours 0x0032 089 89 000 Old_age Always - 8301 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 43 183 Runtime_Bad_Block 0x0032 10 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 30 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 194 Temperature_Celsius 0x0022 101 092 000 Old_age Alway= s - 49 196 eallocated_Event_Count 0x0032 200 200 000 Old_age Always - =20 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Alway= s - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 00 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offli= ne - 0 SCT Error Recovery ontrol: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) /dev/sdf: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebro:0 (ocal to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Raid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clean Dvice UUID : 486831b4:ce34ac6f:c5f43616:8042099d Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 06:10:59 2015 Bad Block Log : 512 entries available at offst 72 sectors Checksum : 77082495 - correct Events : 21958 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AAAA.A.('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital RE4 (SATA 6Gb/s) Device Model: WDC WD2000YYZ-01UL1B1 Serial Number: WD-WCC1P1107956 LU WWN Device Id: 5 0014ee 2b4399801 =46irmware Version: 01.01K02 User Capacity: 2,000,398,934,016 bytes [200 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device i: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr13 13:32:00 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESHTYPE UPDATE= D WHEN_FAILED RAW_VALUE ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDAT= ED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 178 173 021 Pre-fail Alway= s - 6058 4 StartStop_Count 0x0032 100 100 000 Old_age Always - 43 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Alway= s - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Alway= s - 0 9 Powe_On_Hours 0x0032 089 089 000 Old_age Always - 8301 10 Spin_Retry_Count0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 12 Power_Cycle_Count 00032 100 100 000 Old_age Always - 42 183 Runtime_Bad_Block 0x0032 100 100 000 Oldage Always - 0 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Alway= s - 29 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Alway= s - 13 194 Temperature_Celsius 0x0022 102 094 000 Old_age Alway= s - 48 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Alway= s - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Alway= s - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Alway= s - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offlin= e - 0 SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) /dev/sdg: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebro:0 (local to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Raid Devices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB) Array Size : 1720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.8 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors Stae : clean Device UUID : fd209577:7efc364a:aae51364:230eefcd Internal Bitmap : 8 sectors from superblock Update Time : Sun Apr 12 06:09:14 2015 Bad Block Log : 512 entries available at offset 72 sectors Checksum : 93c0611b - correct Events : 21954 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 4 Array State : AAAAAAA ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing)smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-gen= eric] (local buil) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western DigitalRE4 (SATA 6Gb/s) Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P1164520 LU WWN Device Id: 5 0014ee 2b4562c3e =46irmware Version: 01.01K02 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 13 13:32:00 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATE= D WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Alway= s - 0 3 Spi_Up_Time 0x0027 170 165 021 Pre-fail Alays - 6466 4 Start_Stop_Count 0x0032 100 100 000 Old_age Alway= s - 43 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Alway= s - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_ae Always - 0 9 Power_On_Hours 0x003 089 089 000 Old_age Always - 8301 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Alway= s - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Alway= s - 42 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Alway= s - 0 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Alway= s - 29 193Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 13 19 Temperature_Celsius 0x0022 105 092 000 Old_age Always - 45 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Alway= s - 0 197 Current_Pnding_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne - 0 199 UDMA_CRC_Errr_Count 0x0032 200 200 000 Old_age Always - 0 20 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offlin= e - 0 SCT Error Recover Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) /dev/sdh: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Arry UUID : e0890308:1fd11c2e:138b5542:4b5cdc62 Name : Cerebr:0 (local to host Cerebro) Creation Time : Sat Feb 7 23:02:47 2015 Raid Level : raid5 Raid Deices : 7 Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB) Array Size : 11720300544 (11177.35 GiB 12001.59 GB) Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=3D262056 sectors, after=3D176 sectors State : clean Device UUID : b1146034:7d8ab0e5:3c975a918f786829 Internal Bitmap : 8 sectors from superblock Update Time : Su Apr 12 06:09:14 2015 Bad Block Log : 512 entries available at offset 72 ectors Checksum : 74c4fecf - correct Events : 21954 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 6 Array State : AAAAAAA ('A' =3D=3D active, '.' =3D=3D missing, 'R' =3D= =3D replacing) smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital RE4 (SATA 6Gb/s) Device Model: WDC WD2000FYYZ-01UL1B1 Serial Number: WD-WCC1P1154279 LU WWN Device Id: 5 0014ee 25f0218e4 =46irmware Version: 01.01K02 User Capacity: 2,00,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 13 13:32:01 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATE= D WHE_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Alway= s - 0 3 Spin_Up_Time 0x0027 170 170 021 Pre-fail Always - 6491 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 18 5 Reallocated_Sector_Ct 0x033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_ge Always - 1538 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_ag Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18183 Runtime_Bad_Block 0x0032 100 100 000 O= ld_age Always - 0 192 Power-Of_Retract_Count 0x0032 200 200 000 Old_ae Always - 12 193 Load_Cycle_Count 0x032 200 200 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 106 100 000 Old_age Alway= s - 44 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Alway= s - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Alway= s - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offli= ne - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Alway= s - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 00 Old_age Offlin= e - 0 SCT Error Recovery Control: Red: 70 (7.0 seconds) Write: 70 (7.0 seconds) > >Meanwhile, please obtain your dmesg and paste it her. I suggest >turning off line wrap when you paste into your email. Humm dmesg from when ? There nothing before april 12th , dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-34-generic (buildd@roseapple) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #45-Ubuntu MP Mon Mar 23 17:21:27 UTC 2015 (Ubuntu 3.16.0-34.45-generic 3.16.7-ckt8) [ 0.000000] Command line: BOOT_IMAGE=3D/boot/vmlinuz-3.16.0-34-gener= ic root=3DUUID=3D7cff9c6e-27b9-46c6-abaa-53870793f384 ro nomdmonddfnomdmon= isw [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel[ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provied physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] sable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce3b3fff] usable [ 0000000] BIOS-e820: [mem 0x00000000ce3b4000-0x00000000ceddbfff] reserved [ 0.000000] BIOS-e820: [mem x00000000ceddc000-0x00000000cedebfff] AC= PI data [ 0.000000] BIOS-e820: [mem 0x00000000cede000-0x00000000cf4adfff] AC= PI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf4ae000-0x00000000cf643fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf644000-0x00000000cf7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x0000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved [ 0.00000] BIOS-e820: [mem 0x00000000fed08000-0x0000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c00-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000fef00000-0x00000000feffffff] reserved [ 0.000000]BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIS-e820: [mem 0x0000000100000000-0x000000082fffffff] usable [ .000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./C2550D4I, BIOS P2.10 08/06/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable =3D=3D> = rserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: N AGP bridge found [ 0.000000] e820: last_pfn =3D 0x830000 max_arch_pfn =3D 0x400000000 [ 0.000000] MTRR default type: write-ack [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn =3D 0xcf800 max_arch_pfn =3D 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped= at [ffff8800000fd880] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x82fe00000-0x82fffffff] [ 0.000000] [mem 0x82fe00000-0x82fffffff] page 2M [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x82c000000-0x82fdfffff] [ 0.000000] [mem 0x82c000000-0x82fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x800000000-0x82bffffff] [ 0.000000] [mem 0x800000000-0x82bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xce3b3fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xce1fffff] page 2M [ 0.000000] [mem 0xce200000-0xce3b3fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcf644000-0xcf7fffff] [ 0.000000] [mem 0xcf644000-0xcf7fffff] page 4k [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] [ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x357ae000-0x36bcefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000CEDE6098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000CEDEA258 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000CEDE61D0 004084 (v02 ALASKA A M I = =20 01072009 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000CF4ABF80 000040 [ 0.000000] ACPI: FPDT 0x00000000CEDEA368 000044 (v01 ALASKA A M I = =20 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000CEDEA3B0 00009C (v01 ALASKA A M I = =20 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 0x00000000CEDEA450 000038 (v01 ALASKA = =20 00000001 MSFT 01000013) [ 0.000000] ACPI: AAFT 0x00000000CEDEA488 00002F (v01 ALASKA OEMAAFT= =20 01072009 MSFT 00000097) [ 0.000000] ACPI: SPMI 0x00000000CEDEA4B8 000040 (v05 A M I OEMSPMI= =20 00000000 AMI. 00000000) [ 0.000000] ACPI: MCFG 0x00000000CEDEA4F8 00003C (v01 ALASKA A M I = =20 01072009 MSFT 00000097) [ 0.000000] ACPI: WDAT 0x00000000CEDEA538 0001AC (v01 ALASKA A M I = =20 01072009 MSFT 00010013) [ 0.000000] ACPI: UEFI 0x00000000CEDEA6E8 000042 (v01 = =20 00000000 00000000) [ 0.000000] ACPI: APIC 0x00000000CEDEA730 000078 (v03 INTEL TIANO = =20 00000001 MSFT 00000000) [ 0.000000] ACPI: BDAT 0x00000000CEDEA7A8 000030 (v01 = =20 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000CEDEA7D8 0009F1 (v01 PmRef CpuPm = =20 00003000 INTL 20061109) [ 0.000000] ACPI: SPCR 0x00000000CEDEB1D0 000050 (v01 A M I APTIO V= =20 01072009 AMI. 00000005) [ 0.000000] ACPI: HEST 0x00000000CEDEB220 0000A8 (v01 INTEL AVOTON = B=20 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x00000000CEDEB2C8 000030 (v01 INTEL AVOTON = B=20 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x00000000CEDEB2F8 000230 (v01 INTEL AVOTON = B=20 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x00000000CEDEB528 000150 (v01 INTEL AVOTON = B=20 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000082ffff= fff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x82fffffff] [ 0.000000] NODE_DATA [mem 0x82ffdc000-0x82ffe0fff] [ 0.000000] [ffffea0000000000-ffffea0020bfffff] PMD ->=20 [ffff88080f600000-ffff88082f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x82fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xce3b3fff] [ 0.000000] node 0: [mem 0xcf644000-0xcf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x82fffffff] [ 0.000000] On node 0 totalpages: 8381708 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13142 pages used for memmap [ 0.000000] DMA32 zone: 841072 pages, LIFO batch:31 [ 0.000000] Normal zone: 117760 pages used for memmap [ 0.000000] Normal zone: 7536640 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GS= I=20 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high lev= el) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xce3b4000-0xceddbfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xceddc000-0xcedebfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xcedec000-0xcf4adfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xcf4ae000-0xcf643fff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdfffffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed03fff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfeefffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xff7fffff= ] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff= ] [ 0.000000] e820: [mem 0xe4000000-0xfed00fff] available for PCI devi= ces [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids= :4=20 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88082fc00000 s82432=20 r8192 d24064 u524288 [ 0.000000] pcpu-alloc: s82432 r8192 d24064 u524288 alloc=3D1*209715= 2 [ 0.000000] pcpu-alloc: [0] 0 1 2 3=20 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. =20 Total pages: 8250721 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line:=20 BOOT_IMAGE=3D/boot/vmlinuz-3.16.0-34-generic=20 root=3DUUID=3D7cff9c6e-27b9-46c6-abaa-53870793f384 ro nomdmonddf nomdmo= nisw [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -=20 bailing! [ 0.000000] Memory: 32898716K/33526832K available (7748K kernel code= ,=20 1197K rwdata, 3612K rodata, 1360K init, 1308K bss, 628116K reserved) [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D= 4, Nodes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=3D256 to nr_cpu_ids=3D= 4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=3D16, nr_cpu= _ids=3D4 [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=3Dmemory' option if you don't= want=20 memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2399.806 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using= =20 timer frequency.. 4799.61 BogoMIPS (lpj=3D9599224) [ 0.000043] pid_max: default: 32768 minimum: 301 [ 0.000068] ACPI: Core revision 20140424 [ 0.005167] ACPI: All ACPI Tables successfully acquired [ 0.005690] Security Framework initialized [ 0.005725] AppArmor: AppArmor initialized [ 0.005730] Yama: becoming mindful. [ 0.008810] Dentry cache hash table entries: 4194304 (order: 13,=20 33554432 bytes) [ 0.021014] Inode-cache hash table entries: 2097152 (order: 12,=20 16777216 bytes) [ 0.026446] Mount-cache hash table entries: 65536 (order: 7, 524288=20 bytes) [ 0.026505] Mountpoint-cache hash table entries: 65536 (order: 7,=20 524288 bytes) [ 0.027082] Initializing cgroup subsys memory [ 0.027133] Initializing cgroup subsys devices [ 0.027148] Initializing cgroup subsys freezer [ 0.027155] Initializing cgroup subsys net_cls [ 0.027165] Initializing cgroup subsys blkio [ 0.027176] Initializing cgroup subsys perf_event [ 0.027182] Initializing cgroup subsys net_prio [ 0.027197] Initializing cgroup subsys hugetlb [ 0.027228] CPU: Physical Processor ID: 0 [ 0.027232] CPU: Processor Core ID: 0 [ 0.031038] mce: CPU supports 6 MCE banks [ 0.031050] CPU0: Thermal monitoring enabled (TM1) [ 0.031061] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 Last level= =20 dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 tlb_flushall_shift: 6 [ 0.031192] Freeing SMP alternatives memory: 32K (ffffffff81e81000 -= =20 ffffffff81e89000) [ 0.032295] ftrace: allocating 29331 entries in 115 pages [ 0.046388] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin= 2=3D-1 [ 0.086648] smpboot: CPU0: Intel(R) Atom(TM) CPU C2550 @ 2.40GHz=20 (fam: 06, model: 4d, stepping: 08) [ 0.086670] TSC deadline timer enabled [ 0.086705] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont=20 events, full-width counters, Intel PMU driver. [ 0.086723] ... version: 3 [ 0.086726] ... bit width: 40 [ 0.086729] ... generic registers: 2 [ 0.086732] ... value mask: 000000ffffffffff [ 0.086736] ... max period: 000000ffffffffff [ 0.086739] ... fixed-purpose events: 3 [ 0.086742] ... event mask: 0000000700000003 [ 0.089575] x86: Booting SMP configuration: [ 0.089583] .... node #0, CPUs: #1 [ 0.106525] NMI watchdog: enabled on all CPUs, permanently consumes = one=20 hw-PMU counter. [ 0.106727] #2 #3 [ 0.141096] x86: Booted up 1 node, 4 CPUs [ 0.141104] smpboot: Total of 4 processors activated (19198.44 BogoM= IPS) [ 0.141911] devtmpfs: initialized [ 0.153444] evm: security.selinux [ 0.153452] evm: security.SMACK64 [ 0.153455] evm: security.SMACK64EXEC [ 0.153458] evm: security.SMACK64TRANSMUTE [ 0.153461] evm: security.SMACK64MMAP [ 0.153464] evm: security.ima [ 0.153467] evm: security.capability [ 0.153580] PM: Registering ACPI NVS region [mem 0xcedec000-0xcf4adf= ff]=20 (7086080 bytes) [ 0.155393] pinctrl core: initialized pinctrl subsystem [ 0.155538] regulator-dummy: no parameters [ 0.155588] RTC time: 20:43:20, date: 04/12/15 [ 0.155684] NET: Registered protocol family 16 [ 0.155965] cpuidle: using governor ladder [ 0.155971] cpuidle: using governor menu [ 0.156073] ACPI: bus type PCI registered [ 0.156079] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.= 5 [ 0.156200] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem=20 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.156208] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in= =20 E820 [ 0.156214] PCI: MMCONFIG for 0000 [bus00-3f] at [mem=20 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.156387] PCI: Using configuration type 1 for base access [ 0.161921] ACPI: Added _OSI(Module Device) [ 0.161929] ACPI: Added _OSI(Processor Device) [ 0.161933] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.161937] ACPI: Added _OSI(Processor Aggregator Device) [ 0.214248] ACPI: Dynamic OEM Table Load: [ 0.214266] ACPI: SSDT 0xFFFF880803A61000 000490 (v01 PmRef Cpu0Ist= =20 00003000 INTL 20061109) [ 0.214679] ACPI: Dynamic OEM Table Load: [ 0.214689] ACPI: SSDT 0xFFFF880803A3FC00 0001FA (v01 PmRef Cpu0Cst= =20 00003001 INTL 20061109) [ 0.222076] ACPI: Dynamic OEM Table Load: [ 0.222087] ACPI: SSDT 0xFFFF880803A61800 00047A (v01 PmRef ApIst = =20 00003000 INTL 20061109) [ 0.225799] ACPI: Dynamic OEM Table Load: [ 0.225809] ACPI: SSDT 0xFFFF880803A3FE00 000119 (v01 PmRef ApCst = =20 00003000 INTL 20061109) [ 0.230522] ACPI: Interpreter enabled [ 0.230534] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te=20 [\_S1_] (20140424/hwxface-580) [ 0.230544] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te=20 [\_S2_] (20140424/hwxface-580) [ 0.230552] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te=20 [\_S3_] (20140424/hwxface-580) [ 0.230561] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep Sta= te=20 [\_S4_] (20140424/hwxface-580) [ 0.230575] ACPI: (supports S0 S5) [ 0.230580] ACPI: Using IOAPIC for interrupt routing [ 0.230701] HEST: Table parsing has been initialized. [ 0.230709] PCI: Using host bridge windows from ACPI; if necessary, = use=20 "pci=3Dnocrs" and report a bug [ 0.236842] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.236855] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM=20 ClockPM Segments MSI] [ 0.237313] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME = AER=20 PCIeCapability] [ 0.237574] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 00= 00=20 [bus 00-3f] only partially covers this bridge [ 0.237815] PCI host bridge to bus 0000:00 [ 0.237822] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.237828] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.237833] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.237838] pci_bus 0000:00: root bus resource [mem=20 0x000a0000-0x000bffff] [ 0.237843] pci_bus 0000:00: root bus resource [mem=20 0xd0000000-0xdfffffff] [ 0.237848] pci_bus 0000:00: root bus resource [mem=20 0x830000000-0xfffffffff] [ 0.237860] pci 0000:00:00.0: [8086:1f02] type 00 class 0x060000 [ 0.237993] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400 [ 0.238015] pci 0000:00:01.0: reg 0x10: [mem 0xdf740000-0xdf75ffff=20 64bit] [ 0.238068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.238130] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.238199] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400 [ 0.238219] pci 0000:00:03.0: reg 0x10: [mem 0xdf720000-0xdf73ffff=20 64bit] [ 0.238270] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.238330] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.238397] pci 0000:00:04.0: [8086:1f13] type 01 class 0x060400 [ 0.238417] pci 0000:00:04.0: reg 0x10: [mem 0xdf700000-0xdf71ffff=20 64bit] [ 0.238468] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.238531] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.238609] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000 [ 0.238744] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600 [ 0.238798] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 0.238917] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000 [ 0.238939] pci 0000:00:13.0: reg 0x10: [mem 0xdf764000-0xdf7643ff=20 64bit] [ 0.239133] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320 [ 0.239160] pci 0000:00:16.0: reg 0x10: [mem 0xdf763000-0xdf7633ff] [ 0.239274] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.239338] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.239407] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601 [ 0.239427] pci 0000:00:17.0: reg 0x10: [io 0xe0d0-0xe0d7] [ 0.239437] pci 0000:00:17.0: reg 0x14: [io 0xe0c0-0xe0c3] [ 0.239446] pci 0000:00:17.0: reg 0x18: [io 0xe0b0-0xe0b7] [ 0.239456] pci 0000:00:17.0: reg 0x1c: [io 0xe0a0-0xe0a3] [ 0.239465] pci 0000:00:17.0: reg 0x20: [io 0xe040-0xe05f] [ 0.239474] pci 0000:00:17.0: reg 0x24: [mem 0xdf762000-0xdf7627ff] [ 0.239518] pci 0000:00:17.0: PME# supported from D3hot [ 0.239638] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601 [ 0.239657] pci 0000:00:18.0: reg 0x10: [io 0xe090-0xe097] [ 0.239667] pci 0000:00:18.0: reg 0x14: [io 0xe080-0xe083] [ 0.239676] pci 0000:00:18.0: reg 0x18: [io 0xe070-0xe077] [ 0.239686] pci 0000:00:18.0: reg 0x1c: [io 0xe060-0xe063] [ 0.239695] pci 0000:00:18.0: reg 0x20: [io 0xe020-0xe03f] [ 0.239705] pci 0000:00:18.0: reg 0x24: [mem 0xdf761000-0xdf7617ff] [ 0.239748] pci 0000:00:18.0: PME# supported from D3hot [ 0.239868] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100 [ 0.240040] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500 [ 0.240058] pci 0000:00:1f.3: reg 0x10: [mem 0xdf760000-0xdf76001f] [ 0.240091] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f] [ 0.240294] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.240395] pci 0000:02:00.0: [10b5:8608] type 01 class 0x060400 [ 0.240413] pci 0000:02:00.0: reg 0x10: [mem 0xdf500000-0xdf51ffff] [ 0.240513] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.245729] pci 0000:00:03.0: PCI bridge to [bus 02-08] [ 0.245737] pci 0000:00:03.0: bridge window [io 0x9000-0xcfff] [ 0.245742] pci 0000:00:03.0: bridge window [mem=20 0xde000000-0xdf5fffff] [ 0.245837] pci 0000:03:01.0: [10b5:8608] type 01 class 0x060400 [ 0.245947] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.246045] pci 0000:03:05.0: [10b5:8608] type 01 class 0x060400 [ 0.246155] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold [ 0.246252] pci 0000:03:07.0: [10b5:8608] type 01 class 0x060400 [ 0.246362] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold [ 0.246460] pci 0000:03:09.0: [10b5:8608] type 01 class 0x060400 [ 0.246569] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold [ 0.246677] pci 0000:02:00.0: PCI bridge to [bus 03-08] [ 0.246688] pci 0000:02:00.0: bridge window [io 0x9000-0xcfff] [ 0.246693] pci 0000:02:00.0: bridge window [mem=20 0xde000000-0xdf4fffff] [ 0.246793] pci 0000:04:00.0: [1b4b:9172] type 00 class 0x010601 [ 0.246815] pci 0000:04:00.0: reg 0x10: [io 0xc040-0xc047] [ 0.246828] pci 0000:04:00.0: reg 0x14: [io 0xc030-0xc033] [ 0.246841] pci 0000:04:00.0: reg 0x18: [io 0xc020-0xc027] [ 0.246854] pci 0000:04:00.0: reg 0x1c: [io 0xc010-0xc013] [ 0.246867] pci 0000:04:00.0: reg 0x20: [io 0xc000-0xc00f] [ 0.246881] pci 0000:04:00.0: reg 0x24: [mem 0xdf410000-0xdf4101ff] [ 0.246895] pci 0000:04:00.0: reg 0x30: [mem 0xdf400000-0xdf40ffff p= ref] [ 0.246956] pci 0000:04:00.0: PME# supported from D3hot [ 0.253742] pci 0000:03:01.0: PCI bridge to [bus 04] [ 0.253753] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.253758] pci 0000:03:01.0: bridge window [mem=20 0xdf400000-0xdf4fffff] [ 0.253867] pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400 [ 0.254018] pci 0000:05:00.0: supports D1 D2 [ 0.254022] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3c= old [ 0.254110] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.= =20 You can enable it with 'pcie_aspm=3Dforce' [ 0.254127] pci 0000:03:05.0: PCI bridge to [bus 05-06] [ 0.254137] pci 0000:03:05.0: bridge window [io 0xb000-0xbfff] [ 0.254142] pci 0000:03:05.0: bridge window [mem=20 0xde000000-0xdf0fffff] [ 0.254261] pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000 [ 0.254296] pci 0000:06:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 0.254315] pci 0000:06:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff] [ 0.254335] pci 0000:06:00.0: reg 0x18: [io 0xb000-0xb07f] [ 0.254452] pci 0000:06:00.0: supports D1 D2 [ 0.254455] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3c= old [ 0.254611] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.254624] pci 0000:05:00.0: bridge window [io 0xb000-0xbfff] [ 0.254631] pci 0000:05:00.0: bridge window [mem=20 0xde000000-0xdf0fffff] [ 0.254752] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.254780] pci 0000:07:00.0: reg 0x10: [mem 0xdf300000-0xdf37ffff] [ 0.254812] pci 0000:07:00.0: reg 0x18: [io 0xa000-0xa01f] [ 0.254829] pci 0000:07:00.0: reg 0x1c: [mem 0xdf380000-0xdf383fff] [ 0.254976] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.261755] pci 0000:03:07.0: PCI bridge to [bus 07] [ 0.261766] pci 0000:03:07.0: bridge window [io 0xa000-0xafff] [ 0.261772] pci 0000:03:07.0: bridge window [mem=20 0xdf300000-0xdf3fffff] [ 0.261881] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.261910] pci 0000:08:00.0: reg 0x10: [mem 0xdf200000-0xdf27ffff] [ 0.261941] pci 0000:08:00.0: reg 0x18: [io 0x9000-0x901f] [ 0.261958] pci 0000:08:00.0: reg 0x1c: [mem 0xdf280000-0xdf283fff] [ 0.262104] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.269766] pci 0000:03:09.0: PCI bridge to [bus 08] [ 0.269776] pci 0000:03:09.0: bridge window [io 0x9000-0x9fff] [ 0.269782] pci 0000:03:09.0: bridge window [mem=20 0xdf200000-0xdf2fffff] [ 0.269910] pci 0000:09:00.0: [1b4b:9230] type 00 class 0x010601 [ 0.269928] pci 0000:09:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.269939] pci 0000:09:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.269950] pci 0000:09:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.269960] pci 0000:09:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.269971] pci 0000:09:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.269982] pci 0000:09:00.0: reg 0x24: [mem 0xdf610000-0xdf6107ff] [ 0.269993] pci 0000:09:00.0: reg 0x30: [mem 0xdf600000-0xdf60ffff p= ref] [ 0.270046] pci 0000:09:00.0: PME# supported from D3hot [ 0.277771] pci 0000:00:04.0: PCI bridge to [bus 09] [ 0.277779] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.277784] pci 0000:00:04.0: bridge window [mem=20 0xdf600000-0xdf6fffff] [ 0.277999] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12) [ 0.278106] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 10 11 12) *0,=20 disabled. [ 0.278213] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12) [ 0.278318] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12) [ 0.278423] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12) [ 0.278529] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 7 *10 11 12) [ 0.278634] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 *7 10 11 12) [ 0.278740] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 10 *11 12) [ 0.279455] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.279657] vgaarb: setting as boot device: PCI:0000:06:00.0 [ 0.279663] vgaarb: device added:=20 PCI:0000:06:00.0,decodes=3Dio+mem,owns=3Dio+mem,locks=3Dnone [ 0.279668] vgaarb: loaded [ 0.279672] vgaarb: bridge control possible 0000:06:00.0 [ 0.280075] SCSI subsystem initialized [ 0.280171] libata version 3.00 loaded. [ 0.280218] ACPI: bus type USB registered [ 0.280254] usbcore: registered new interface driver usbfs [ 0.280277] usbcore: registered new interface driver hub [ 0.280322] usbcore: registered new device driver usb [ 0.280562] PCI: Using ACPI for IRQ routing [ 0.281490] PCI: pci_cache_line_size set to 64 bytes [ 0.281567] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.281571] e820: reserve RAM buffer [mem 0xce3b4000-0xcfffffff] [ 0.281573] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff] [ 0.281754] NetLabel: Initializing [ 0.281768] NetLabel: domain hash size =3D 128 [ 0.281772] NetLabel: protocols =3D UNLABELED CIPSOv4 [ 0.281792] NetLabel: unlabeled traffic allowed by default [ 0.281906] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.281915] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.283985] Switched to clocksource hpet [ 0.293782] AppArmor: AppArmor Filesystem Enabled [ 0.293844] pnp: PnP ACPI init [ 0.293871] ACPI: bus type PNP registered [ 0.294233] system 00:00: [mem 0xe0000000-0xefffffff] could not be=20 reserved [ 0.294240] system 00:00: [mem 0xcf800000-0xcfffffff] could not be=20 reserved [ 0.294248] system 00:00: Plug and Play ACPI device, IDs PNP0c01=20 (active) [ 0.294346] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.294353] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.294359] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.294365] system 00:01: [mem 0xfed00000-0xfedfffff] could not be=20 reserved [ 0.294371] system 00:01: [mem 0x000c0000-0x000dffff] could not be=20 reserved [ 0.294376] system 00:01: [mem 0x000e0000-0x000fffff] could not be=20 reserved [ 0.294382] system 00:01: [mem 0xffa00000-0xffffffff] has been reser= ved [ 0.294388] system 00:01: [mem 0xfee00000-0xfeefffff] has been reser= ved [ 0.294394] system 00:01: Plug and Play ACPI device, IDs PNP0c02=20 (active) [ 0.294456] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (activ= e) [ 0.294570] system 00:03: Plug and Play ACPI device, IDs PNP0c02=20 (active) [ 0.294919] ACPI: IRQ 4 override to edge, high [ 0.294931] pnp 00:04: [dma 0 disabled] [ 0.295011] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (activ= e) [ 0.295348] ACPI: IRQ 3 override to edge, high [ 0.295359] pnp 00:05: [dma 0 disabled] [ 0.295439] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (activ= e) [ 0.295684] system 00:06: [io 0x0a00-0x0a0f] has been reserved [ 0.295691] system 00:06: [io 0x0a10-0x0a1f] has been reserved [ 0.295696] system 00:06: [io 0x0a20-0x0a2f] has been reserved [ 0.295703] system 00:06: Plug and Play ACPI device, IDs PNP0c02=20 (active) [ 0.295873] pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (activ= e) [ 0.296024] pnp: PnP ACPI: found 8 devices [ 0.296029] ACPI: bus type PNP unregistered [ 0.304897] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.304918] pci 0000:03:01.0: PCI bridge to [bus 04] [ 0.304925] pci 0000:03:01.0: bridge window [io 0xc000-0xcfff] [ 0.304934] pci 0000:03:01.0: bridge window [mem=20 0xdf400000-0xdf4fffff] [ 0.304946] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.304952] pci 0000:05:00.0: bridge window [io 0xb000-0xbfff] [ 0.304963] pci 0000:05:00.0: bridge window [mem=20 0xde000000-0xdf0fffff] [ 0.304978] pci 0000:03:05.0: PCI bridge to [bus 05-06] [ 0.304984] pci 0000:03:05.0: bridge window [io 0xb000-0xbfff] [ 0.304992] pci 0000:03:05.0: bridge window [mem=20 0xde000000-0xdf0fffff] [ 0.305004] pci 0000:03:07.0: PCI bridge to [bus 07] [ 0.305010] pci 0000:03:07.0: bridge window [io 0xa000-0xafff] [ 0.305018] pci 0000:03:07.0: bridge window [mem=20 0xdf300000-0xdf3fffff] [ 0.305029] pci 0000:03:09.0: PCI bridge to [bus 08] [ 0.305035] pci 0000:03:09.0: bridge window [io 0x9000-0x9fff] [ 0.305043] pci 0000:03:09.0: bridge window [mem=20 0xdf200000-0xdf2fffff] [ 0.305055] pci 0000:02:00.0: PCI bridge to [bus 03-08] [ 0.305061] pci 0000:02:00.0: bridge window [io 0x9000-0xcfff] [ 0.305069] pci 0000:02:00.0: bridge window [mem=20 0xde000000-0xdf4fffff] [ 0.305081] pci 0000:00:03.0: PCI bridge to [bus 02-08] [ 0.305086] pci 0000:00:03.0: bridge window [io 0x9000-0xcfff] [ 0.305094] pci 0000:00:03.0: bridge window [mem=20 0xde000000-0xdf5fffff] [ 0.305107] pci 0000:00:04.0: PCI bridge to [bus 09] [ 0.305113] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.305120] pci 0000:00:04.0: bridge window [mem=20 0xdf600000-0xdf6fffff] [ 0.305134] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.305138] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.305141] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.305144] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff] [ 0.305147] pci_bus 0000:00: resource 8 [mem 0x830000000-0xfffffffff= ] [ 0.305151] pci_bus 0000:02: resource 0 [io 0x9000-0xcfff] [ 0.305154] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf5fffff] [ 0.305157] pci_bus 0000:03: resource 0 [io 0x9000-0xcfff] [ 0.305160] pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf4fffff] [ 0.305163] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.305167] pci_bus 0000:04: resource 1 [mem 0xdf400000-0xdf4fffff] [ 0.305170] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.305173] pci_bus 0000:05: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.305176] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 0.305179] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.305182] pci_bus 0000:07: resource 0 [io 0xa000-0xafff] [ 0.305185] pci_bus 0000:07: resource 1 [mem 0xdf300000-0xdf3fffff] [ 0.305189] pci_bus 0000:08: resource 0 [io 0x9000-0x9fff] [ 0.305192] pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.305195] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.305198] pci_bus 0000:09: resource 1 [mem 0xdf600000-0xdf6fffff] [ 0.305245] NET: Registered protocol family 2 [ 0.305715] TCP established hash table entries: 262144 (order: 9,=20 2097152 bytes) [ 0.306421] TCP bind hash table entries: 65536 (order: 8, 1048576 by= tes) [ 0.306709] TCP: Hash tables configured (established 262144 bind 655= 36) [ 0.306778] TCP: reno registered [ 0.306835] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.307072] UDP-Lite hash table entries: 16384 (order: 7, 524288 byt= es) [ 0.307365] NET: Registered protocol family 1 [ 0.320178] pci 0000:06:00.0: Video device with shadowed ROM [ 0.320196] PCI: CLS 64 bytes, default 64 [ 0.320305] Trying to unpack rootfs image as initramfs... [ 0.782169] Freeing initrd memory: 20612K (ffff8800357ae000 -=20 ffff880036bcf000) [ 0.782217] PCI-DMA: Using software bounce buffering for IO (SWIOTLB= ) [ 0.782225] software IO TLB [mem 0xca3b4000-0xce3b4000] (64MB) mappe= d=20 at [ffff8800ca3b4000-ffff8800ce3b3fff] [ 0.782569] microcode: CPU0 sig=3D0x406d8, pf=3D0x1, revision=3D0x12= 2 [ 0.782582] microcode: CPU1 sig=3D0x406d8, pf=3D0x1, revision=3D0x12= 2 [ 0.782600] microcode: CPU2 sig=3D0x406d8, pf=3D0x1, revision=3D0x12= 2 [ 0.782617] microcode: CPU3 sig=3D0x406d8, pf=3D0x1, revision=3D0x12= 2 [ 0.782758] microcode: Microcode Update Driver: v2.00=20 , Peter Oruba [ 0.782824] Scanning for low memory corruption every 60 seconds [ 0.783382] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.783410] Initialise system trusted keyring [ 0.783449] audit: initializing netlink subsys (disabled) [ 0.783481] audit: type=3D2000 audit(1428871400.736:1): initialized [ 0.783918] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.786642] zpool: loaded [ 0.786649] zbud: loaded [ 0.786884] VFS: Disk quotas dquot_6.5.2 [ 0.786950] Dquot-cache hash table entries: 512 (order 0, 4096 bytes= ) [ 0.787835] fuse init (API version 7.23) [ 0.787997] msgmni has been set to 32768 [ 0.788094] Key type big_key registered [ 0.788830] Key type asymmetric registered [ 0.788837] Asymmetric key parser 'x509' registered [ 0.788907] Block layer SCSI generic (bsg) driver version 0.4 loaded= =20 (major 252) [ 0.788998] io scheduler noop registered [ 0.789004] io scheduler deadline registered (default) [ 0.789089] io scheduler cfq registered [ 0.789378] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.789560] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X [ 0.789710] pcieport 0000:00:04.0: can't derive routing for PCI INT = A [ 0.789717] pcieport 0000:00:04.0: PCI INT A: no GSI [ 0.789745] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X [ 0.789908] pcieport 0000:02:00.0: irq 43 for MSI/MSI-X [ 0.790111] pcieport 0000:03:01.0: irq 44 for MSI/MSI-X [ 0.790309] pcieport 0000:03:05.0: irq 45 for MSI/MSI-X [ 0.790505] pcieport 0000:03:07.0: irq 46 for MSI/MSI-X [ 0.790699] pcieport 0000:03:09.0: irq 47 for MSI/MSI-X [ 0.790885] aer 0000:00:01.0:pcie02: service driver aer loaded [ 0.790940] aer 0000:00:03.0:pcie02: service driver aer loaded [ 0.790972] aer 0000:00:04.0:pcie02: service driver aer loaded [ 0.791001] pcieport 0000:00:01.0: Signaling PME through PCIe PME=20 interrupt [ 0.791009] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme lo= aded [ 0.791024] pcieport 0000:00:03.0: Signaling PME through PCIe PME=20 interrupt [ 0.791030] pcieport 0000:02:00.0: Signaling PME through PCIe PME=20 interrupt [ 0.791034] pcieport 0000:03:01.0: Signaling PME through PCIe PME=20 interrupt [ 0.791039] pci 0000:04:00.0: Signaling PME through PCIe PME interru= pt [ 0.791044] pcieport 0000:03:05.0: Signaling PME through PCIe PME=20 interrupt [ 0.791048] pci 0000:05:00.0: Signaling PME through PCIe PME interru= pt [ 0.791053] pci 0000:06:00.0: Signaling PME through PCIe PME interru= pt [ 0.791057] pcieport 0000:03:07.0: Signaling PME through PCIe PME=20 interrupt [ 0.791062] pci 0000:07:00.0: Signaling PME through PCIe PME interru= pt [ 0.791066] pcieport 0000:03:09.0: Signaling PME through PCIe PME=20 interrupt [ 0.791071] pci 0000:08:00.0: Signaling PME through PCIe PME interru= pt [ 0.791077] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme lo= aded [ 0.791092] pcieport 0000:00:04.0: Signaling PME through PCIe PME=20 interrupt [ 0.791097] pci 0000:09:00.0: Signaling PME through PCIe PME interru= pt [ 0.791104] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme lo= aded [ 0.791133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.791169] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 [ 0.791260] vesafb: mode is 1024x768x32, linelength=3D4096, pages=3D= 0 [ 0.791264] vesafb: scrolling: redraw [ 0.791269] vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0 [ 0.791293] vesafb: framebuffer at 0xde000000, mapped to=20 0xffffc90007600000, using 3072k, total 3072k [ 0.936729] Console: switching to colour frame buffer device 128x48 [ 1.083775] fb0: VESA VGA frame buffer device [ 1.085002] intel_idle: MWAIT substates: 0x3000020 [ 1.085005] intel_idle: v0.4 model 0x4D [ 1.085008] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.085278] input: Power Button as=20 /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.087259] ACPI: Power Button [PWRF] [ 1.088789] ERST: Error Record Serialization Table (ERST) support is= =20 initialized. [ 1.090794] pstore: Registered erst as persistent store backend [ 1.093069] GHES: APEI firmware first mode is enabled by APEI bit an= d=20 WHEA _OSC. [ 1.095270] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.117684] 00:04: ttyS0 at I/O 0x3f8 (irq =3D 4, base_baud =3D 1152= 00) is=20 a 16550A [ 1.140412] 00:05: ttyS4 at I/O 0x248 (irq =3D 3, base_baud =3D 1152= 00) is=20 a 16550A [ 1.145688] Linux agpgart interface v0.103 [ 1.149503] brd: module loaded [ 1.151712] loop: module loaded [ 1.152918] libphy: Fixed MDIO Bus: probed [ 1.153998] tun: Universal TUN/TAP device driver, 1.6 [ 1.155366] tun: (C) 1999-2004 Max Krasnyansky [ 1.157161] PPP generic driver version 2.4.2 [ 1.158379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driv= er [ 1.160127] ehci-pci: EHCI PCI platform driver [ 1.161485] ehci-pci 0000:00:16.0: EHCI Host Controller [ 1.162879] ehci-pci 0000:00:16.0: new USB bus registered, assigned = bus=20 number 1 [ 1.164909] ehci-pci 0000:00:16.0: debug port 2 [ 1.170030] ehci-pci 0000:00:16.0: cache line size of 64 is not=20 supported [ 1.170054] ehci-pci 0000:00:16.0: irq 23, io mem 0xdf763000 [ 1.180707] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 [ 1.236051] usb usb1: New USB device found, idVendor=3D1d6b,=20 idProduct=3D0002 [ 1.291860] usb usb1: New USB device strings: Mfr=3D3, Product=3D2,=20 SerialNumber=3D1 [ 1.348162] usb usb1: Product: EHCI Host Controller [ 1.404295] usb usb1: Manufacturer: Linux 3.16.0-34-generic ehci_hcd [ 1.461875] usb usb1: SerialNumber: 0000:00:16.0 [ 1.520057] hub 1-0:1.0: USB hub found [ 1.578743] hub 1-0:1.0: 8 ports detected [ 1.636886] ehci-platform: EHCI generic platform driver [ 1.694858] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.694865] ohci-pci: OHCI PCI platform driver [ 1.694885] ohci-platform: OHCI generic platform driver [ 1.694899] uhci_hcd: USB Universal Host Controller Interface driver [ 1.695011] i8042: PNP: No PS/2 controller found. Probing ports=20 directly. [ 1.781232] tsc: Refined TSC clocksource calibration: 2399.992 MHz [ 1.945411] usb 1-1: new high-speed USB device number 2 using ehci-p= ci [ 1.975520] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.975871] mousedev: PS/2 mouse device common for all mice [ 1.979243] rtc_cmos 00:02: RTC can wake from S4 [ 1.979666] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.979748] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram,= =20 hpet irqs [ 1.979876] device-mapper: uevent: version 1.0.3 [ 1.980082] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)=20 initialised: dm-devel@redhat.com [ 1.980105] ledtrig-cpu: registered to indicate activity on CPUs [ 1.980252] TCP: cubic registered [ 1.980448] NET: Registered protocol family 10 [ 1.980807] NET: Registered protocol family 17 [ 1.980869] Key type dns_resolver registered [ 1.981641] Loading compiled-in X.509 certificates [ 1.983313] Loaded X.509 cert 'Magrathea: Glacier signing key:=20 b5e4b3533b47259e0a1a978f5b0c6007ef6e33e7' [ 1.983335] registered taskstats version 1 [ 1.987185] Key type trusted registered [ 1.994281] Key type encrypted registered [ 1.994291] AppArmor: AppArmor sha1 policy hashing enabled [ 1.994295] ima: No TPM chip found, activating TPM-bypass! [ 1.994326] evm: HMAC attrs: 0x1 [ 1.996178] Magic number: 11:694:750 [ 1.996208] tty ttyS1: hash matches [ 2.019597] rtc_cmos 00:02: setting system clock to 2015-04-12 20:43= :22=20 UTC (1428871402) [ 2.033036] input: AT Translated Set 2 keyboard as=20 /devices/platform/i8042/serio0/input/input1 [ 2.151261] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.151262] EDD information not available. [ 2.151384] PM: Hibernation image not present or could not be loaded= =2E [ 2.177936] usb 1-1: New USB device found, idVendor=3D8087, idProduc= t=3D07db [ 2.177939] usb 1-1: New USB device strings: Mfr=3D0, Product=3D0,=20 SerialNumber=3D0 [ 2.178226] hub 1-1:1.0: USB hub found [ 2.178432] hub 1-1:1.0: 4 ports detected [ 2.734114] usb 1-1.1: new low-speed USB device number 3 using ehci-= pci [ 3.133547] usb 1-1.1: New USB device found, idVendor=3D413c,=20 idProduct=3D2112 [ 3.133549] usb 1-1.1: New USB device strings: Mfr=3D1, Product=3D2,= =20 SerialNumber=3D0 [ 3.133550] usb 1-1.1: Product: Dell USB Wired Multimedia Keyboard [ 3.133552] usb 1-1.1: Manufacturer: DELL [ 3.310559] usb 1-1.2: new low-speed USB device number 4 using ehci-= pci [ 3.780559] usb 1-1.2: New USB device found, idVendor=3D051d,=20 idProduct=3D0002 [ 3.780561] usb 1-1.2: New USB device strings: Mfr=3D3, Product=3D1,= =20 SerialNumber=3D2 [ 3.780562] usb 1-1.2: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q= 8 [ 3.780564] usb 1-1.2: Manufacturer: American Power Conversion [ 3.780565] usb 1-1.2: SerialNumber: 4B1034P04531 =20 [ 3.935062] usb 1-1.4: new high-speed USB device number 5 using ehci= -pci [ 4.272319] usb 1-1.4: New USB device found, idVendor=3D046b,=20 idProduct=3Dff01 [ 4.272321] usb 1-1.4: New USB device strings: Mfr=3D1, Product=3D2,= =20 SerialNumber=3D3 [ 4.272322] usb 1-1.4: Product: Virtual Hub [ 4.272324] usb 1-1.4: Manufacturer: American Megatrends Inc. [ 4.272326] usb 1-1.4: SerialNumber: serial [ 4.389672] hub 1-1.4:1.0: USB hub found [ 4.389778] hub 1-1.4:1.0: 5 ports detected [ 4.969710] Freeing unused kernel memory: 1360K (ffffffff81d2d000 -=20 ffffffff81e81000) [ 5.026718] Write protecting the kernel read-only data: 12288k [ 5.084392] Switched to clocksource tsc [ 5.084562] usb 1-1.4.4: new low-speed USB device number 6 using=20 ehci-pci [ 5.200588] Freeing unused kernel memory: 432K (ffff880001794000 -=20 ffff880001800000) [ 5.260494] Freeing unused kernel memory: 484K (ffff880001b87000 -=20 ffff880001c00000) [ 5.317018] usb 1-1.4.4: New USB device found, idVendor=3D046b,=20 idProduct=3Dff10 [ 5.373820] usb 1-1.4.4: New USB device strings: Mfr=3D1, Product=3D= 2,=20 SerialNumber=3D0 [ 5.373822] usb 1-1.4.4: Product: Virtual Keyboard and Mouse [ 5.373824] usb 1-1.4.4: Manufacturer: American Megatrends Inc. [ 5.626457] systemd-udevd[118]: starting version 208 [ 5.686957] random: systemd-udevd urandom read with 19 bits of entro= py=20 available [ 5.751456] md: linear personality registered for level -1 [ 5.812697] pps_core: LinuxPPS API ver. 1 registered [ 5.874815] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodo= lfo=20 Giometti [ 5.938774] ahci 0000:00:17.0: version 3.0 [ 5.938874] md: multipath personality registered for level -4 [ 5.938927] ahci 0000:00:17.0: irq 48 for MSI/MSI-X [ 5.939090] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbp= s=20 0xf impl SATA mode [ 5.939094] ahci 0000:00:17.0: flags: 64bit ncq led clo pio deso sad= m=20 sds apst=20 [ 5.940552] scsi0 : ahci [ 5.940793] scsi1 : ahci [ 5.940986] scsi2 : ahci [ 5.941171] scsi3 : ahci [ 5.941257] ata1: SATA max UDMA/133 abar m2048@0xdf762000 port=20 0xdf762100 irq 48 [ 5.941263] ata2: SATA max UDMA/133 abar m2048@0xdf762000 port=20 0xdf762180 irq 48 [ 5.941267] ata3: SATA max UDMA/133 abar m2048@0xdf762000 port=20 0xdf762200 irq 48 [ 5.941272] ata4: SATA max UDMA/133 abar m2048@0xdf762000 port=20 0xdf762280 irq 48 [ 5.941493] ahci 0000:00:18.0: irq 49 for MSI/MSI-X [ 5.941612] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbp= s=20 0x3 impl SATA mode [ 5.941615] ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sad= m=20 sds apst=20 [ 5.942530] scsi4 : ahci [ 5.942730] scsi5 : ahci [ 5.942815] ata5: SATA max UDMA/133 abar m2048@0xdf761000 port=20 0xdf761100 irq 49 [ 5.942820] ata6: SATA max UDMA/133 abar m2048@0xdf761000 port=20 0xdf761180 irq 49 [ 5.943042] ahci 0000:04:00.0: irq 50 for MSI/MSI-X [ 5.943182] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbp= s=20 0x3 impl SATA mode [ 5.943185] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fb= s=20 pio slum part sxs=20 [ 5.944036] scsi6 : ahci [ 5.944235] scsi7 : ahci [ 5.944319] ata7: SATA max UDMA/133 abar m512@0xdf410000 port=20 0xdf410100 irq 50 [ 5.944325] ata8: SATA max UDMA/133 abar m512@0xdf410000 port=20 0xdf410180 irq 50 [ 5.944483] ahci 0000:09:00.0: controller can do FBS, turning on CAP= _FBS [ 5.944540] ahci 0000:09:00.0: irq 51 for MSI/MSI-X [ 5.960636] ahci 0000:09:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbp= s=20 0xff impl SATA mode [ 5.960640] ahci 0000:09:00.0: flags: 64bit ncq fbs pio=20 [ 5.963187] scsi8 : ahci [ 5.963398] scsi9 : ahci [ 5.963603] scsi10 : ahci [ 5.963805] scsi11 : ahci [ 5.964007] scsi12 : ahci [ 5.964213] scsi13 : ahci [ 5.964431] scsi14 : ahci [ 5.964651] scsi15 : ahci [ 5.964798] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610100 irq 51 [ 5.964804] ata10: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610180 irq 51 [ 5.964808] ata11: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610200 irq 51 [ 5.964813] ata12: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610280 irq 51 [ 5.964818] ata13: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610300 irq 51 [ 5.964823] ata14: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610380 irq 51 [ 5.964829] ata15: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610400 irq 51 [ 5.964833] ata16: SATA max UDMA/133 abar m2048@0xdf610000 port=20 0xdf610480 irq 51 [ 6.260735] ata2: SATA link down (SStatus 0 SControl 300) [ 6.260823] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.260893] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.260960] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.261019] ata3: SATA link down (SStatus 0 SControl 300) [ 6.261103] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.261807] ata4.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.261809] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth=20 31/32), AA [ 6.261937] ata6.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.261939] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth=20 31/32), AA [ 6.262031] ata5.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.262033] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth=20 31/32), AA [ 6.263547] ata5.00: configured for UDMA/133 [ 6.263593] ata6.00: configured for UDMA/133 [ 6.272548] ata4.00: configured for UDMA/133 [ 6.272905] ata1.00: ATA-8: KINGSTON SH103S3480G, 501ABBF0, max UDMA= /133 [ 6.272907] ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth=20 31/32), AA [ 6.282853] ata1.00: configured for UDMA/133 [ 6.282995] scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S= 3=20 BBF0 PQ: 0 ANSI: 5 [ 6.283448] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.283660] scsi 3:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 6.283937] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 6.284028] sd 3:0:0:0: [sdb] Write Protect is off [ 6.284030] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.284069] sd 3:0:0:0: [sdb] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 6.284287] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 6.284491] scsi 4:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 6.284768] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.284953] scsi 5:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 6.285208] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 6.286051] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 6.286120] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 6.286243] sd 5:0:0:0: [sdd] Write Protect is off [ 6.286246] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 6.286288] sd 4:0:0:0: [sdc] Write Protect is off [ 6.286290] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 6.286349] sd 5:0:0:0: [sdd] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 6.286458] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (48= 0=20 GB/447 GiB) [ 6.286480] sd 4:0:0:0: [sdc] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 6.286749] sd 0:0:0:0: [sda] Write Protect is off [ 6.286751] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.286825] sd 0:0:0:0: [sda] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 6.292794] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.292859] ata15: SATA link down (SStatus 0 SControl 300) [ 6.292932] ata10: SATA link down (SStatus 0 SControl 300) [ 6.293020] ata13: SATA link down (SStatus 0 SControl 300) [ 6.293092] ata14: SATA link down (SStatus 0 SControl 300) [ 6.293171] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.295174] sdd: unknown partition table [ 6.295441] sd 5:0:0:0: [sdd] Attached SCSI disk [ 6.296227] sdb: [ 6.296468] sd 3:0:0:0: [sdb] Attached SCSI disk [ 6.296693] sda: sda1 sda2 < sda5 > [ 6.297181] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.436877] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.436937] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.437817] ata7.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.437819] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth=20 31/32), AA [ 6.437935] ata8.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.437937] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth=20 31/32), AA [ 6.460895] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.641374] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 6.641717] ata16.00: configured for UDMA/66 [ 6.642321] ata9.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.642323] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth=20 31/32), AA [ 6.642334] ata11.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max=20 UDMA/133 [ 6.642336] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth=20 31/32), AA [ 6.685074] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.685605] ata12.00: ATA-8: WDC WD4000F9YZ-09N20L0, 01.01A01, max=20 UDMA/133 [ 6.685607] ata12.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth=20 31/32), AA [ 11.437257] ata9.00: configured for UDMA/133 [ 11.444691] sdc: unknown partition table [ 11.444892] ata7.00: configured for UDMA/133 [ 11.444989] scsi 6:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 11.445332] sd 4:0:0:0: [sdc] Attached SCSI disk [ 11.445594] sd 6:0:0:0: [sde] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 11.445679] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 11.445750] sd 6:0:0:0: [sde] Write Protect is off [ 11.445752] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 11.445790] sd 6:0:0:0: [sde] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 11.454337] sde: unknown partition table [ 11.454650] sd 6:0:0:0: [sde] Attached SCSI disk [ 12.060877] ata11.00: configured for UDMA/133 [ 12.116912] ata8.00: configured for UDMA/133 [ 12.116923] PTP clock support registered [ 12.116935] ata12.00: configured for UDMA/133 [ 12.199773] md: bind [ 12.338271] scsi 7:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 12.347182] md: bind [ 12.448431] hidraw: raw HID events driver (C) Jiri Kosina [ 12.453506] sd 7:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 12.453598] sd 7:0:0:0: [sdf] Write Protect is off [ 12.453601] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 12.453639] sd 7:0:0:0: [sdf] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 12.669411] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 12.726632] random: nonblocking pool is initialized [ 12.726930] sdf: unknown partition table [ 12.727380] sd 7:0:0:0: [sdf] Attached SCSI disk [ 12.741918] scsi 8:0:0:0: Direct-Access ATA WDC WD2000FYYZ-= 0=20 1K02 PQ: 0 ANSI: 5 [ 12.742278] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 12.742461] sd 8:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2= =2E00=20 TB/1.81 TiB) [ 12.742467] scsi 10:0:0:0: Direct-Access ATA WDC WD2000FYYZ= -0=20 1K02 PQ: 0 ANSI: 5 [ 12.742554] sd 8:0:0:0: [sdg] Write Protect is off [ 12.742557] sd 8:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 12.742597] sd 8:0:0:0: [sdg] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 12.742777] sd 10:0:0:0: [sdh] 3907029168 512-byte logical blocks:=20 (2.00 TB/1.81 TiB) [ 12.742869] sd 10:0:0:0: [sdh] Write Protect is off [ 12.742871] sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 12.742913] sd 10:0:0:0: [sdh] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 12.743163] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 12.743441] scsi 11:0:0:0: Direct-Access ATA WDC WD4000F9YZ= -0=20 1A01 PQ: 0 ANSI: 5 [ 12.743854] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 12.744086] sd 11:0:0:0: [sdi] 7814037168 512-byte logical blocks:=20 (4.00 TB/3.63 TiB) [ 12.744088] sd 11:0:0:0: [sdi] 4096-byte physical blocks [ 12.744203] sd 11:0:0:0: [sdi] Write Protect is off [ 12.744205] sd 11:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 12.744261] sd 11:0:0:0: [sdi] Write cache: enabled, read cache:=20 enabled, doesn't support DPO or FUA [ 12.744436] scsi 15:0:0:0: Processor Marvell Console = =20 1.01 PQ: 0 ANSI: 5 [ 12.749777] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0= x0 [ 12.749779] ata16.00: irq_stat 0x40000001 [ 12.749783] scsi 15:0:0:0: CDB:=20 [ 12.749787] Inquiry: 12 01 00 00 ff 00 [ 12.749793] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 3 = dma=20 16640 in res 50/00:02:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device erro= r) [ 12.749794] ata16.00: status: { DRDY } [ 12.750061] scsi 15:0:0:0: Attached scsi generic sg9 type 3 [ 14.470729] sdh: unknown partition table [ 14.508071] sdi: sdi1 [ 14.508430] sd 11:0:0:0: [sdi] Attached SCSI disk [ 14.656895] dca service started, version 1.12.1 [ 14.656927] sdg: unknown partition table [ 14.657167] sd 10:0:0:0: [sdh] Attached SCSI disk [ 14.657248] sd 8:0:0:0: [sdg] Attached SCSI disk [ 14.901586] md: raid0 personality registered for level 0 [ 14.968207] md: raid1 personality registered for level 1 [ 15.028744] igb: Intel(R) Gigabit Ethernet Network Driver - version=20 5.2.13-k [ 15.031559] md: bind [ 15.151157] igb: Copyright (c) 2007-2014 Intel Corporation. [ 15.152129] igb 0000:07:00.0: irq 52 for MSI/MSI-X [ 15.152135] igb 0000:07:00.0: irq 53 for MSI/MSI-X [ 15.152140] igb 0000:07:00.0: irq 54 for MSI/MSI-X [ 15.152147] igb 0000:07:00.0: irq 55 for MSI/MSI-X [ 15.152152] igb 0000:07:00.0: irq 56 for MSI/MSI-X [ 15.188784] igb 0000:07:00.0: added PHC on eth0 [ 15.188786] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network=20 Connection [ 15.188789] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1)=20 d0:50:99:45:e7:a2 [ 15.188918] igb 0000:07:00.0: eth0: PBA No: 001300-000 [ 15.188920] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s),= 4=20 tx queue(s) [ 15.189754] igb 0000:08:00.0: irq 57 for MSI/MSI-X [ 15.189761] igb 0000:08:00.0: irq 58 for MSI/MSI-X [ 15.189766] igb 0000:08:00.0: irq 59 for MSI/MSI-X [ 15.189771] igb 0000:08:00.0: irq 60 for MSI/MSI-X [ 15.189776] igb 0000:08:00.0: irq 61 for MSI/MSI-X [ 15.215617] raid6: sse2x1 806 MB/s [ 15.226907] igb 0000:08:00.0: added PHC on eth1 [ 15.226909] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network=20 Connection [ 15.226911] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1)=20 d0:50:99:45:e7:a3 [ 15.227039] igb 0000:08:00.0: eth1: PBA No: 001300-000 [ 15.227041] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s),= 4=20 tx queue(s) [ 15.283688] raid6: sse2x2 1050 MB/s [ 15.336749] md: bind [ 15.351743] raid6: sse2x4 1825 MB/s [ 15.351745] raid6: using algorithm sse2x4 (1825 MB/s) [ 15.351746] raid6: using ssse3x2 recovery algorithm [ 15.458061] md: bind [ 15.458361] xor: measuring software checksum speed [ 15.495852] prefetch64-sse: 8697.000 MB/sec [ 15.535879] generic_sse: 7937.000 MB/sec [ 15.535880] xor: using function: prefetch64-sse (8697.000 MB/sec) [ 15.580910] md: bind [ 15.729506] usbcore: registered new interface driver usbhid [ 15.729507] usbhid: USB HID core driver [ 15.758850] md: bind [ 15.818660] async_tx: api initialized (async) [ 16.331090] input: DELL Dell USB Wired Multimedia Keyboard as=20 /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:211= 2.00 01/input/input2 [ 16.331272] hid-generic 0003:413C:2112.0001: input,hidraw0: USB HID=20 v1.10 Keyboard [DELL Dell USB Wired Multimedia Keyboard] on=20 usb-0000:00:16.0-1.1/input0 [ 16.332699] input: DELL Dell USB Wired Multimedia Keyboard as=20 /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:413C:211= 2.00 02/input/input3 [ 16.332872] hid-generic 0003:413C:2112.0002: input,hidraw1: USB HID=20 v1.10 Device [DELL Dell USB Wired Multimedia Keyboard] on=20 usb-0000:00:16.0-1.1/input1 [ 17.175095] md: raid6 personality registered for level 6 [ 17.239252] md: raid5 personality registered for level 5 [ 17.302453] md: raid4 personality registered for level 4 [ 17.374907] md: raid10 personality registered for level 10 [ 17.441805] systemd-udevd[125]: renamed network interface eth0 to p1= 19p1 [ 17.625710] systemd-udevd[127]: renamed network interface eth1 to p1= 21p1 [ 17.861420] EXT4-fs (sda1): mounted filesystem with ordered data mod= e.=20 Opts: (null) [ 18.067549] hid-generic 0003:051D:0002.0003: hiddev0,hidraw2: USB HI= D=20 v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB= =20 =46W:q8] on usb-0000:00:16.0-1.2/input0 [ 18.210613] input: American Megatrends Inc. Virtual Keyboard and Mou= se=20 as=20 /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/000= 3:04 6B:FF10.0004/input/input4 [ 18.210762] hid-generic 0003:046B:FF10.0004: input,hidraw3: USB HID=20 v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on= =20 usb-0000:00:16.0-1.4.4/input0 [ 18.210915] input: American Megatrends Inc. Virtual Keyboard and Mou= se=20 as=20 /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/000= 3:04 6B:FF10.0005/input/input5 [ 18.211063] hid-generic 0003:046B:FF10.0005: input,hidraw4: USB HID=20 v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on=20 usb-0000:00:16.0-1.4.4/input1 [ 19.046203] init: plymouth-upstart-bridge main process (258) termina= ted=20 with status 1 [ 19.132023] init: plymouth-upstart-bridge main process ended, respaw= ning [ 19.347982] EXT4-fs (sda1): re-mounted. Opts: errors=3Dremount-ro [ 20.538396] systemd-udevd[475]: starting version 208 [ 20.613582] shpchp: Standard Hot Plug PCI Controller Driver version:= 0.4 [ 20.634330] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April = 27,=20 2011) [ 20.634337] bonding: Warning: miimon must be specified, otherwise=20 bonding will not detect link failure, speed and duplex which are essent= ial=20 for 802.3ad operation [ 20.634339] bonding: Forcing miimon to 100msec [ 20.634341] bonding: MII link monitoring set to 100 ms [ 20.654879] ipmi message handler version 39.2 [ 20.657974] IPMI System Interface driver. [ 20.658031] ipmi_si: probing via ACPI [ 20.658068] ipmi_si 00:07: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 20.658071] ipmi_si: Adding ACPI-specified kcs state machine [ 20.658097] ipmi_si: probing via SPMI [ 20.658100] ipmi_si: SPMI: io 0xca8 regsize 1 spacing 1 irq 0 [ 20.658102] ipmi_si: Adding SPMI-specified kcs state machine [ 20.658106] ipmi_si: Trying ACPI-specified kcs state machine at i/o=20 address 0xca2, slave address 0x0, irq 0 [ 20.674570] ismt_smbus 0000:00:13.0: irq 62 for MSI/MSI-X [ 20.716881] [drm] Initialized drm 1.1.0 20060810 [ 20.738741] [drm] AST 2300 detected [ 20.738779] [drm] dram 1632000000 1 32 01000000 [ 20.739578] [TTM] Zone kernel: Available graphics memory: 16460818 = kiB [ 20.739587] [TTM] Zone dma32: Available graphics memory: 2097152 k= iB [ 20.739595] [TTM] Initializing pool allocator [ 20.739609] [TTM] Initializing DMA pool allocator [ 20.811833] audit: type=3D1400 audit(1428871421.293:2): apparmor=3D"= STATUS"=20 operation=3D"profile_load" profile=3D"unconfined" name=3D"/sbin/dhclien= t"=20 pid=3D568 comm=3D"apparmor_parser" [ 20.811845] audit: type=3D1400 audit(1428871421.293:3): apparmor=3D"= STATUS"=20 operation=3D"profile_load" profile=3D"unconfined"=20 name=3D"/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3D568=20 comm=3D"apparmor_parser" [ 20.811853] audit: type=3D1400 audit(1428871421.293:4): apparmor=3D"= STATUS"=20 operation=3D"profile_load" profile=3D"unconfined"=20 name=3D"/usr/lib/connman/scripts/dhclient-script" pid=3D568=20 comm=3D"apparmor_parser" [ 20.813440] audit: type=3D1400 audit(1428871421.297:5): apparmor=3D"= STATUS"=20 operation=3D"profile_replace" profile=3D"unconfined" name=3D"/sbin/dhcl= ient"=20 pid=3D570 comm=3D"apparmor_parser" [ 20.813454] audit: type=3D1400 audit(1428871421.297:6): apparmor=3D"= STATUS"=20 operation=3D"profile_replace" profile=3D"unconfined"=20 name=3D"/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3D570=20 comm=3D"apparmor_parser" [ 20.813462] audit: type=3D1400 audit(1428871421.297:7): apparmor=3D"= STATUS"=20 operation=3D"profile_replace" profile=3D"unconfined"=20 name=3D"/usr/lib/connman/scripts/dhclient-script" pid=3D570=20 comm=3D"apparmor_parser" [ 20.833286] checking generic (de000000 300000) vs hw (de000000 10000= 00) [ 20.833292] fb: switching to astdrmfb from VESA VGA [ 20.833327] Console: switching to colour dummy device 80x25 [ 20.838100] fbcon: astdrmfb (fb0) is primary device [ 20.867738] Console: switching to colour frame buffer device 180x56 [ 20.906787] ast 0000:06:00.0: fb0: astdrmfb frame buffer device [ 20.906790] ast 0000:06:00.0: registered panic notifier [ 20.938914] init: avahi-cups-reload main process (624) terminated wi= th=20 status 1 [ 20.940219] [drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on= =20 minor 0 [ 20.982956] SSE version of gcm_enc/dec engaged. [ 21.016417] ipmi_si 00:07: Found new BMC (man_id: 0x000000, prod_id:= =20 0xaabb, dev_id: 0x20) [ 21.016435] ipmi_si 00:07: IPMI kcs interface initialized [ 21.191014] gpio_ich: GPIO from 196 to 255 on gpio_ich [ 21.409788] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 21.421277] bonding: bond0: Adding slave p119p1 [ 21.678578] IPv6: ADDRCONF(NETDEV_UP): p119p1: link is not ready [ 21.678883] bonding: bond0: Enslaving p119p1 as a backup interface w= ith=20 a down link [ 21.680512] bonding: bond0: Adding slave p121p1 [ 21.931185] IPv6: ADDRCONF(NETDEV_UP): p121p1: link is not ready [ 21.931511] bonding: bond0: Enslaving p121p1 as a backup interface w= ith=20 a down link [ 24.639849] igb 0000:08:00.0 p121p1: igb: p121p1 NIC Link is Up 1000= =20 Mbps Full Duplex, Flow Control: RX [ 24.711100] bonding: bond0: link status up for interface p121p1,=20 enabling it in 0 ms [ 24.711110] bonding: bond0: link status definitely up for interface=20 p121p1, 1000 Mbps full duplex [ 24.711116] bonding: bond0: now running without any active interface= ! [ 24.711440] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 25.168255] igb 0000:07:00.0 p119p1: igb: p119p1 NIC Link is Up 1000= =20 Mbps Full Duplex, Flow Control: RX [ 25.211419] bonding: bond0: link status up for interface p119p1,=20 enabling it in 200 ms [ 25.411569] bonding: bond0: link status definitely up for interface=20 p119p1, 1000 Mbps full duplex [ 36.150836] init: failsafe main process (770) killed by TERM signal [ 36.253915] audit: type=3D1400 audit(1428871436.725:8): apparmor=3D"= STATUS"=20 operation=3D"profile_replace" profile=3D"unconfined" name=3D"/sbin/dhcl= ient"=20 pid=3D1112 comm=3D"apparmor_parser" [ 36.253930] audit: type=3D1400 audit(1428871436.725:9): apparmor=3D"= STATUS"=20 operation=3D"profile_replace" profile=3D"unconfined"=20 name=3D"/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3D1112=20 comm=3D"apparmor_parser" [ 36.253938] audit: type=3D1400 audit(1428871436.725:10):=20 apparmor=3D"STATUS" operation=3D"profile_replace" profile=3D"unconfined= "=20 name=3D"/usr/lib/connman/scripts/dhclient-script" pid=3D1112=20 comm=3D"apparmor_parser" [ 36.256053] audit: type=3D1400 audit(1428871436.729:11):=20 apparmor=3D"STATUS" operation=3D"profile_load" profile=3D"unconfined"=20 name=3D"/usr/sbin/tcpdump" pid=3D1112 comm=3D"apparmor_parser" [ 39.963233] init: plymouth-upstart-bridge main process ended, respaw= ning [ 47.495473] systemd-logind[1716]: New seat seat0. [ 47.496236] systemd-logind[1716]: Watching system buttons on=20 /dev/input/event0 (Power Button) [ 47.498844] systemd-logind[1716]: Failed to start unit=20 user@1000.service: Unknown unit: user@1000.service [ 47.498933] systemd-logind[1716]: Failed to start user service: Unkn= own=20 unit: user@1000.service [ 47.500096] systemd-logind[1716]: New session 1 of user tm. [ 1401.719683] md: md127 stopped. [ 1401.719704] md: unbind [ 1401.733947] md: export_rdev(sdh) [ 1401.734095] md: unbind [ 1401.745943] md: export_rdev(sdf) [ 1401.746030] md: unbind [ 1401.753964] md: export_rdev(sdg) [ 1401.754049] md: unbind [ 1401.761953] md: export_rdev(sde) [ 1401.762038] md: unbind [ 1401.769959] md: export_rdev(sdb) [ 1401.770038] md: unbind [ 1401.785975] md: export_rdev(sdc) [ 1401.786064] md: unbind [ 1401.793981] md: export_rdev(sdd) [ 1403.392910] md: md127 stopped. [ 1403.396139] md: bind [ 1403.397115] md: bind [ 1403.397349] md: bind [ 1403.397532] md: bind [ 1403.397686] md: bind [ 1403.397846] md: bind [ 1403.397985] md: bind [ 1403.398356] md: md127 stopped. [ 1403.398369] md: unbind [ 1403.415283] md: export_rdev(sdc) [ 1403.415342] md: unbind [ 1403.435259] md: export_rdev(sdh) [ 1403.435290] md: unbind [ 1403.447270] md: export_rdev(sdb) [ 1403.447298] md: unbind [ 1403.459253] md: export_rdev(sdg) [ 1403.459268] md: unbind [ 1403.471260] md: export_rdev(sdf) [ 1403.471275] md: unbind [ 1403.483287] md: export_rdev(sde) [ 1403.483302] md: unbind [ 1403.495283] md: export_rdev(sdd) [40799.136302] systemd-logind[1716]: New session 16 of user tm. [40862.518901] md: md127 stopped. [40862.521171] md: bind [40862.521397] md: bind [40862.521647] md: bind [40862.521874] md: bind [40862.522105] md: bind [40862.522303] md: bind [40862.522394] md: md127 stopped. [40862.522406] md: unbind [40862.551020] md: export_rdev(sdc) [40862.551104] md: unbind [40862.571029] md: export_rdev(sdh) [40862.571060] md: unbind [40862.583040] md: export_rdev(sdb) [40862.583073] md: unbind [40862.595022] md: export_rdev(sdg) [40862.595036] md: unbind [40862.611045] md: export_rdev(sdf) [40862.611061] md: unbind [40862.627062] md: export_rdev(sde) [41116.350227] systemd-logind[1716]: New session 17 of user tm. [42775.055674] md: md127 stopped. [42775.057210] md: bind [42775.057329] md: bind [42775.057438] md: bind [42775.057571] md: bind [42775.057711] md: bind [42775.057836] md: bind [42775.057947] md: bind [42775.057992] md: md127 stopped. [42775.057999] md: unbind [42775.081647] md: export_rdev(sdc) [42775.081711] md: unbind [42775.089613] md: export_rdev(sdh) [42775.089648] md: unbind [42775.105598] md: export_rdev(sdb) [42775.105629] md: unbind [42775.109950] md: export_rdev(sdg) [42775.109966] md: unbind [42775.117639] md: export_rdev(sdf) [42775.117655] md: unbind [42775.125644] md: export_rdev(sde) [42775.125659] md: unbind [42775.133648] md: export_rdev(sdd) [53243.732604] systemd-logind[1716]: New session 23 of user tm. [56415.677328] systemd-logind[1716]: New session 25 of user tm=20 =8A. but i have kern.log form the fatal day > >Next, boot with a recent liveCD that has mdadm utilities (I recommend >systemrescuecd from sysrescuecd.org.) and use its kernel and tools to >try "mdadm -Afv /dev/md0 /dev/sd[b-h]=B2=20 Ok , i=B9m downloading, but only can try tonight, when =8Cim back home= =20 > >You may have to --stop a partial assembly, as rescue CDs often attempt >to assemble arrays found. And adjust the device letters if it boots >with your system disk as other than sda. > >Show the mdadm output if it fails. If it works, back up your critical >files immediately. You should then do a clean shutdown, and it should >let you boot back into your original system. ok > >Phil Thx, thomas =20 > -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html