I'm attaching the config.log from the gcc dir, as well as the config.log from zlib. Hope this helps! On Mar 4, 2010, at 9:39 PM, Khem Raj wrote: > On Thu, Mar 4, 2010 at 6:41 AM, Joshua Smith wrote: >> Oh, sorry about that. I've attached the do_configure log for gcc_cross. Doesn't look too helpful to me, but what do I know? If you meant some other configure log, let me know! >> >> In case it helps: before trying to build gcj inside OE, I was trying to build a native GCC compiler on the target machine (TouchBook, based on the Beagleboard), and I got this same error when I tried configuring with --disable-shared (with --enabled-shared I had other problems). >> > > its not config.log that you attached is it ? >> Thanks. >> >> -Joshua >> >> On Mar 4, 2010, at 12:23 AM, Khem Raj wrote: >> >>> On Wed, Mar 3, 2010 at 9:19 AM, Joshua Smith wrote: >>>> Update: I dug around in the log files and I think I have a more root cause of this error. >>>> >>>> configure: error: Link tests are not allowed after GCC_NO_EXECUTABLES. >>>> >>>> I've attached the whole log of the failing build. >>>> >>>> Any hints? >>>> >>>> On Mar 3, 2010, at 11:20 AM, Joshua Smith wrote: >>>> >>>>> Hello, >>>>> >>>>> I'm new to OE. I'm trying to get GCJ compiled for the TouchBook (an ARM-based tablet). After some searching and trial-and-error, I figured out that I need to add: >>>>> >>>>> JAVA_arm = ",java" to recipies/gcc-4.3.3.inc >>>>> >>>>> But now I'm getting an error when it tries to build gcc-cross-4.3.3: >>>>> >>>>> make[4]: Entering directory `/OE/build/tmp/work/armv7a-angstrom-linux-gnueabi/gcc-cross-4.3.3-r7.1/gcc-4.3.3/build.i686-linux.arm-angstrom-linux-gnueabi/64/zlib' >>>>> make[4]: *** No rule to make target `all'. Stop. >>>>> make[4]: Leaving directory `/OE/build/tmp/work/armv7a-angstrom-linux-gnueabi/gcc-cross-4.3.3-r7.1/gcc-4.3.3/build.i686-linux.arm-angstrom-linux-gnueabi/64/zlib' >>>>> make[3]: *** [multi-do] Error 1 >>>>> make[3]: Leaving directory `/OE/build/tmp/work/armv7a-angstrom-linux-gnueabi/gcc-cross-4.3.3-r7.1/gcc-4.3.3/build.i686-linux.arm-angstrom-linux-gnueabi/zlib' >>>>> make[2]: *** [all-multi] Error 2 >>>>> make[2]: Leaving directory `/OE/build/tmp/work/armv7a-angstrom-linux-gnueabi/gcc-cross-4.3.3-r7.1/gcc-4.3.3/build.i686-linux.arm-angstrom-linux-gnueabi/zlib' >>>>> make[1]: *** [all-zlib] Error 2 >>>>> >>>>> (I can give you more of the log if it would help, but this is the first error) >>>>> >>>>> I can see why adding Java would cause GCC to need zlib when maybe it didn't before. But I don't know what to change to get zlib configured as part of the gcc build process. >>> >>> for configure errors its better to post config.log which is generated >>> in the build tree. Thats where we can find the cause of error. >>> do_compile log wont help. >>> >>> >>>>> >>>>> Help? >>>>> >>>>> -Joshua Smith >>>>> >>>> >>>> _______________________________________________ >>>> Openembedded-devel mailing list >>>> Openembedded-devel@lists.openembedded.org >>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel >>>> >>>> >>> >>> _______________________________________________ >>> Openembedded-devel mailing list >>> Openembedded-devel@lists.openembedded.org >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel >> >> >> >> >> >> _______________________________________________ >> Openembedded-devel mailing list >> Openembedded-devel@lists.openembedded.org >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel >> >> > > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel