From: Peng Fan <peng.fan@nxp.com>
To: u-boot@lists.denx.de
Subject: [NXP-IMX] please pull nxp-imx-2021-4-6
Date: Wed, 7 Apr 2021 05:27:55 +0000 [thread overview]
Message-ID: <DB6PR0402MB2760E287A9690B634E7EDFDF88759@DB6PR0402MB2760.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <DB6PR0402MB276041361ADCC33BD18917DE88769@DB6PR0402MB2760.eurprd04.prod.outlook.com>
> Subject: [NXP-IMX] please pull nxp-imx-2021-4-6
Please ignore this PR, I'll resend a v2 PR
Thanks,
Peng.
>
> Hi Stefano,
>
> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you
> need me rebase on imx/master, I could redo this PR. This is quite a large PR,
> since lots stuff in downstream tree.
>
> I ran local buildman test for all boards, no issue found.
> ------------------------------------------
> convert to use binman for i.MX8MN/M/P EVK board i.MX8M caam/dek
> support hab update/fix for i.MX8M/7ULP env/distro cleanup for i.MX8M
> i.MX8M ddr script/driver update
> ------------------------------------------
>
> Thanks,
> Peng.
>
> The following changes since commit
> 90eba245a66aa20589404ba537215faf2012c1a3:
>
> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>
> are available in the Git repository at:
>
> https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
>
> for you to fetch changes up to
> 95dfcc086b419aece6835fd7aaad704de661e246:
>
> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>
> ----------------------------------------------------------------
> Aymen Sghaier (6):
> crypto: caam: Add CAAM support to i.MX8M platforms
> crypto: caam: Fix build warnings pointer casting
> crypto: Add blob command support for i.MX8M platforms
> crypto: caam: Fix pointer size to 32bit for i.MX8M
> crypto: caam: Add secure memory vid 3 support
> crypto: caam: RNG4 TRNG errata
>
> Breno Lima (13):
> imx: imx7 Support for Manufacturing Protection
> imx: Avoid hardcoded output ring size register offset (ORSR)
> imx: Ensure CAAM clock is enabled prior getting out_jr_size
> imx: Avoid hardcoded Job Ring Max size
> imx: hab: Enable hab.c to authenticate additional images in open
> configuration
> imx: hab: Check if IVT header is HABv4
> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
> imx: hab: Fix build warnings in 32-bit targets
> crypto: fsl: blob: Flush dcache range for destination address
> mx6dq: hab: Fix chip version in hab.h code
> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
> cmd: blob: Instantiate RNG before running CMD_BLOB
> fsl_mfgprot: Fix typo in sign_mppubk()
>
> Clement Faure (2):
> imx8m: Add DEK blob encapsulation for imx8m
> imx8: Add DEK blob encapsulation
>
> Clement Le Marquis (1):
> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM
> SCFGR register to 0x3
>
> Franck LENORMAND (3):
> crypto: caam: change JR running loop
> caam: enable support for iMX7ULP
> imx7ulp: Enable support for cmd blob
>
> Jacky Bai (1):
> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>
> Peng Fan (21):
> tools: imx image: fix write warning
> imx8mm/p: remove boot.cmd
> imx8mm_evk: add/cleanup variable for distro
> imx8mp_evk: add/cleanup variable for distro
> imx8mp_evk: spl: clean up including headers
> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
> power: pca9450: add a new parameter for power_pca9450_init
> imx8mn_evk: drop duplicated code
> imx8mn: Add LPDDR4 EVK board support
> imx: logos: use NXP logo
> imx8m: soc: update fuse path
> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
> imx: HAB: Update hab codes to support ARM64 and i.MX8M
> imx8m: add regs used by CAAM
> imx8mm_evk: switch to use binman to pack images
> doc: imx8mm_evk: update doc after using binman
> imx8mn-ddr4-evk: switch to use binman
> imx8mn-evk: switch to use binman
> doc: imx8mn_evk: update doc after using binman
> imx8mp-evk: switch to use binman
> doc: imx8mp-evk: update after using binman
>
> Sherry Sun (1):
> imx8mp: ddr: Add inline ECC feature support
>
> Utkarsh Gupta (2):
> imx: HAB: Validate IVT before authenticating image
> imx: hab: Display All HAB events via hab_status command
>
> Ye Li (18):
> imx8mm_evk: Update to latest LPDDR4 script
> imx8mm_evk: Switch to new imx8mm evk board
> imx8mp_evk: Update LPDDR4 timing for new FW 202006
> imx8mp_evk: Update LPDDR4 refresh time
> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
> imx8mn: Add support for 11x11 UltraLite part number
> imx8m: Update thermal and PMU kernel nodes for dual/single cores
> imx8m: ddr: Disable CA VREF Training for LPDDR4
> iMX8MQ: Recognize the B2 revision
> misc: ocotp: Update OCOTP driver for iMX8MQ B2
> imx8mq_evk: Applying default LPDDR4 script for B2
> imx: hab: Add function to authenticate kernel image
> hab: Change calling to ROM API failsafe
> imx: HAB: Add support for iMX8MM
> iMX8M: Add support to enable CONFIG_IMX_HAB
> imx: cmd_dek: Enable DEK only for chips supporting CAAM
> crypto: caam: Add fsl caam driver
> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>
> haidong.zheng (1):
> imx8mp: refine power on imx8mp board
>
> arch/arm/Kconfig | 6 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117
> ++++++++-
> arch/arm/dts/imx8mm-evk.dtsi | 127
> +++++-----
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115
> +++++++++
> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128
> ++++++++++
> arch/arm/dts/imx8mn-evk.dts | 128
> ++++++++++
> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112
> +++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
> arch/arm/include/asm/arch-imx8/image.h | 11 +
> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
> arch/arm/mach-imx/Kconfig | 44 +++-
> arch/arm/mach-imx/Makefile | 3 +
> arch/arm/mach-imx/cmd_dek.c | 262
> ++++++++++++++++++--
> arch/arm/mach-imx/cmd_mfgprot.c | 150
> ++++++++++++
> arch/arm/mach-imx/cpu.c | 8 +-
> arch/arm/mach-imx/hab.c | 417
> ++++++++++++++++++++++++++++----
> arch/arm/mach-imx/imx8/Kconfig | 1 +
> arch/arm/mach-imx/imx8m/Kconfig | 11 +
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
> arch/arm/mach-imx/imx8m/soc.c | 183
> ++++++++++++--
> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
> arch/arm/mach-imx/priblob.c | 33 +++
> board/freescale/imx8mm_evk/boot.cmd | 35 ---
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 692
> +++++++++++++++++++++-------------------------------
> board/freescale/imx8mm_evk/spl.c | 33 +--
> board/freescale/imx8mn_evk/Kconfig | 6 +-
> board/freescale/imx8mn_evk/Makefile | 6 +
> board/freescale/imx8mn_evk/ddr4_timing.c | 1057
> ++++++++++++++++++++++++++++++++++------------------------------------------
> ----
> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++
> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/spl.c | 50 +++-
> board/freescale/imx8mp_evk/boot.cmd | 25 --
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
> board/freescale/imx8mp_evk/lpddr4_timing.c | 372
> +++++++++++++++++++++-------
> board/freescale/imx8mp_evk/spl.c | 38 +--
> board/freescale/imx8mq_evk/spl.c | 2 +-
> board/phytec/phycore_imx8mp/spl.c | 2 +-
> cmd/Kconfig | 8 +
> cmd/Makefile | 1 +
> cmd/blob.c | 16 ++
> cmd/cmd_fsl_caam.c | 88
> +++++++
> configs/imx8mm_evk_defconfig | 6 +-
> configs/imx8mn_ddr4_evk_defconfig | 4 +-
> configs/imx8mn_evk_defconfig | 93 +++++++
> configs/imx8mp_evk_defconfig | 4 +-
> doc/board/freescale/imx8mm_evk.rst | 3 +-
> doc/board/freescale/imx8mn_evk.rst | 3 +-
> doc/board/freescale/imx8mp_evk.rst | 11 +-
> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/fsl/Kconfig | 6 +
> drivers/crypto/fsl/Makefile | 4 +-
> drivers/crypto/fsl/desc.h | 49 ++--
> drivers/crypto/fsl/desc_constr.h | 28 +--
> drivers/crypto/fsl/fsl_blob.c | 6 +
> drivers/crypto/fsl/fsl_hash.c | 6 +-
> drivers/crypto/fsl/fsl_mfgprot.c | 160
> ++++++++++++
> drivers/crypto/fsl/jobdesc.c | 16 +-
> drivers/crypto/fsl/jr.c | 53 ++--
> drivers/crypto/fsl/jr.h | 11 +-
> drivers/crypto/fsl/type.h | 16 ++
> drivers/crypto/fsl_caam.c | 720
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/crypto/fsl_caam_internal.h | 230
> ++++++++++++++++++
> drivers/ddr/imx/imx8m/Kconfig | 8 +
> drivers/misc/mxc_ocotp.c | 2 +-
> drivers/power/pmic/pmic_pca9450.c | 4 +-
> include/configs/imx8mm_evk.h | 8 +-
> include/configs/imx8mp_evk.h | 8 +-
> include/fsl_caam.h | 24 ++
> include/fsl_sec.h | 54 +++--
> include/power/pca9450.h | 2 +-
> tools/imx8image.c | 2 +-
> tools/imx8mimage.c | 2 +-
> tools/logos/freescale.bmp | Bin 46738 ->
> 47670 bytes
> 84 files changed, 8600 insertions(+), 1484 deletions(-) create mode 100644
> arch/arm/dts/imx8mn-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk.dts create mode 100644
> arch/arm/mach-imx/cmd_mfgprot.c create mode 100644
> arch/arm/mach-imx/priblob.c delete mode 100644
> board/freescale/imx8mm_evk/boot.cmd
> create mode 100644
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
> create mode 100644
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
> mode change 100644 => 100755
> board/freescale/imx8mp_evk/lpddr4_timing.c
> create mode 100644 cmd/cmd_fsl_caam.c
> create mode 100644 configs/imx8mn_evk_defconfig create mode 100644
> drivers/crypto/fsl/fsl_mfgprot.c create mode 100644
> drivers/crypto/fsl/type.h create mode 100644 drivers/crypto/fsl_caam.c
> create mode 100644 drivers/crypto/fsl_caam_internal.h
> create mode 100644 include/fsl_caam.h
next prev parent reply other threads:[~2021-04-07 5:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-06 9:34 [NXP-IMX] please pull nxp-imx-2021-4-6 Peng Fan
2021-04-06 9:45 ` Stefano Babic
2021-04-08 1:21 ` Peng Fan
2021-04-07 5:27 ` Peng Fan [this message]
2021-05-27 14:47 ` Frieder Schrempf
2021-05-27 14:59 ` Stefano Babic
2021-05-27 15:09 ` Frieder Schrempf
2021-05-27 15:27 ` Sean Anderson
2021-05-27 15:40 ` Stefano Babic
2021-05-27 15:42 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB6PR0402MB2760E287A9690B634E7EDFDF88759@DB6PR0402MB2760.eurprd04.prod.outlook.com \
--to=peng.fan@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.