From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Tue, 22 Oct 2019 02:49:53 +0000 Subject: [U-Boot] [PATCH 3/3] imx8: output SECO-FW, ATF and imx-mkimage commit IDs In-Reply-To: <20191021155851.16483-3-agust@denx.de> References: <20191021155851.16483-1-agust@denx.de> <20191021155851.16483-3-agust@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Anatolij, > Subject: [PATCH 3/3] imx8: output SECO-FW, ATF and imx-mkimage commit > IDs > > Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) > and add the commit IDs to the environment. > > Signed-off-by: Anatolij Gustschin > --- > arch/arm/mach-imx/imx8/misc.c | 61 > ++++++++++++++++++++++++++++++++++- > 1 file changed, 60 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-imx/imx8/misc.c > b/arch/arm/mach-imx/imx8/misc.c index fe73e29eee..b0693358e7 100644 > --- a/arch/arm/mach-imx/imx8/misc.c > +++ b/arch/arm/mach-imx/imx8/misc.c > @@ -1,6 +1,9 @@ > // SPDX-License-Identifier: GPL-2.0+ > #include > #include > +#include > + > +DECLARE_GLOBAL_DATA_PTR; > > int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate) > { @@ -25,9 +28,28 @@ int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, > sc_pm_clock_rate_t clk_rate) > return 0; > } > > +#define FSL_SIP_BUILDINFO 0xC2000003 > +#define FSL_SIP_BUILDINFO_GET_COMMITHASH 0x00 > +extern uint32_t _end_ofs; > + > +static void set_buildinfo_to_env(uint32_t scfw, uint32_t secofw, > + char *mkimage, char *atf) > +{ > + if (!mkimage || !atf) > + return; > + > + env_set("commit_mkimage", mkimage); > + env_set("commit_atf", atf); > + env_set_hex("commit_scfw", (ulong)scfw); > + env_set_hex("commit_secofw", (ulong)secofw); } > + > void build_info(void) > { > + u32 seco_build = 0, seco_commit = 0; > u32 sc_build = 0, sc_commit = 0; > + ulong atf_commit = 0; > + char *mkimage_commit, *temp; > > /* Get SCFW build and commit id */ > sc_misc_build_info(-1, &sc_build, &sc_commit); @@ -35,5 +57,42 @@ > void build_info(void) > printf("SCFW does not support build info\n"); > sc_commit = 0; /* Display 0 if build info not supported */ > } > - printf("Build: SCFW %x\n", sc_commit); > + > + /* Get SECO FW build and commit id */ > + sc_misc_seco_build_info(-1, &seco_build, &seco_commit); Use sc_seco_build_info. > + if (!seco_build) { > + debug("SECO FW does not support build info\n"); > + /* Display 0 when the build info is not supported */ > + seco_commit = 0; > + } > + > + /* > + * Get imx-mkimage commit id. > + * The imx-mkimage puts the commit hash behind the end of u-boot.bin > + */ > + mkimage_commit = (char *)(ulong)(CONFIG_SYS_TEXT_BASE + _end_ofs > + > + fdt_totalsize(gd->fdt_blob)); > + temp = mkimage_commit + 8; > + *temp = '\0'; > + > + if (strlen(mkimage_commit) == 0) { > + debug("IMX-MKIMAGE does not support build info\n"); > + mkimage_commit = "0"; /* Display 0 */ > + } We no need imx-mkimage, use mkimage in U-Boot no need this piece code. Regards, Peng. > + > + /* Get ARM Trusted Firmware commit id */ > + atf_commit = call_imx_sip(FSL_SIP_BUILDINFO, > + FSL_SIP_BUILDINFO_GET_COMMITHASH, 0, 0, 0); > + if (atf_commit == 0xffffffff) { > + debug("ATF does not support build info\n"); > + atf_commit = 0x30; /* Display 0 */ > + } > + > + printf("Build: SCFW %08x, SECO-FW %08x\n" > + " IMX-MKIMAGE %s, ATF %s\n", > + sc_commit, seco_commit, mkimage_commit, (char > *)&atf_commit); > + > + /* Set all to env */ > + set_buildinfo_to_env(sc_commit, seco_commit, mkimage_commit, > + (char *)&atf_commit); > } > -- > 2.17.1