Re: [PATCH] librte_pmd_packet: add PMD for AF_PACKET-based virtual devices

["Zhou, Danny" <danny.zhou-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>]

I want to run a common DPDK L2 or L3 forward benchmark for bi-direction traffics, so at least two ports are required. Just like how to measure Linux bridge or OVS performance, you need add at least two ports into a bridge.

> -----Original Message-----
> From: John W. Linville [mailto:linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org]
> Sent: Saturday, July 12, 2014 3:32 AM
> To: Zhou, Danny
> Cc: dev-VfR2kkLFssw@public.gmane.org
> Subject: Re: [dpdk-dev] [PATCH] librte_pmd_packet: add PMD for
> AF_PACKET-based virtual devices
> 
> I'm not sure that would make any sense -- the AF_PACKET sockets are mapped to
> specific interfaces.
> 
> What are you trying to do with a syntax like that?
> 
> John
> 
> On Fri, Jul 11, 2014 at 07:04:19PM +0000, Zhou, Danny wrote:
> > Does it support specifying multiple NIC interfaces using command line option like
> "--vdev=eth_packet0,iface=..."? Say "iface=eth0,eth1,eth2...", tried but it doesn't
> work.
> >
> > > -----Original Message-----
> > > From: Zhou, Danny
> > > Sent: Saturday, July 12, 2014 2:01 AM
> > > To: 'John W. Linville'
> > > Cc: dev-VfR2kkLFssw@public.gmane.org
> > > Subject: RE: [dpdk-dev] [PATCH] librte_pmd_packet: add PMD for
> > > AF_PACKET-based virtual devices
> > >
> > > Tried on 3.12, both of them are undefined. Anyway, will comment them
> > > out and see what performance it could achieve.
> > >
> > > > -----Original Message-----
> > > > From: John W. Linville [mailto:linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org]
> > > > Sent: Saturday, July 12, 2014 1:41 AM
> > > > To: Zhou, Danny
> > > > Cc: dev-VfR2kkLFssw@public.gmane.org
> > > > Subject: Re: [dpdk-dev] [PATCH] librte_pmd_packet: add PMD for
> > > > AF_PACKET-based virtual devices
> > > >
> > > > On Fri, Jul 11, 2014 at 05:20:42PM +0000, Zhou, Danny wrote:
> > > > > Looks like you used a pretty new kernel version with new socket
> > > > > options that old
> > > > kernel like my 3.12 does not support. When I tried this patch, it
> > > > just cannot build, and compiler complains like below. Which Linux
> > > > distribution does this
> > > patch work for?
> > > > How to ensure it works for old kernels?
> > > > >
> > > > > /home/danny/dpdk.org/dpdk/lib/librte_pmd_packet/rte_eth_packet.c
> > > > > : In function
> > > > rte_pmd_init_internals:
> > > > > /home/danny/dpdk.org/dpdk/lib/librte_pmd_packet/rte_eth_packet.c
> > > > > :524
> > > > > :1
> > > > > 7: error: PACKET_FANOUT_FLAG_ROLLOVER undeclared (first use in
> > > > > this
> > > > > function)
> > > > > /home/danny/dpdk.org/dpdk/lib/librte_pmd_packet/rte_eth_packet.c
> > > > > :524
> > > > > :1
> > > > > 7: note: each undeclared identifier is reported only once for
> > > > > each function it appears in
> > > > > /home/danny/dpdk.org/dpdk/lib/librte_pmd_packet/rte_eth_packet.c
> > > > > :557
> > > > > :3
> > > > > 3: error: PACKET_QDISC_BYPASS undeclared (first use in this
> > > > > function)
> > > >
> > > > Both of them are isolated, so for playing with it you could just comment those
> out.
> > > > It looks like PACKET_FANOUT_FLAG_ROLLOVER should have been in
> > > > 3.10, while PACKET_QDISC_BYPASS didn't show-up until 3.14...
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git annotate
> > > > include/uapi/linux/if_packet.h | grep PACKET_FANOUT_FLAG_ROLLOVER
> > > > 77f65ebdca506	(Willem de Bruijn	2013-03-19 10:18:11 +0000	64)#define
> > > > PACKET_FANOUT_FLAG_ROLLOVER	0x1000
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git show -s --format=short
> > > > 77f65ebdca506 commit 77f65ebdca506870d99bfabe52bde222511022ec
> > > > Author: Willem de Bruijn <willemb-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
> > > >
> > > >     packet: packet fanout rollover during socket overload
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git describe --contains
> > > > 77f65ebdca506
> > > > v3.10-rc1~66^2~423
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git annotate
> > > > include/uapi/linux/if_packet.h | grep PACKET_QDISC_BYPASS
> > > > d346a3fae3ff1	(Daniel Borkmann	2013-12-06 11:36:17 +0100	56)#define
> > > > PACKET_QDISC_BYPASS		20
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git show -s --format=short
> > > > d346a3fae3ff1 commit
> > > > d346a3fae3ff1d99f5d0c819bf86edf9094a26a1
> > > > Author: Daniel Borkmann <dborkman-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> > > >
> > > >     packet: introduce PACKET_QDISC_BYPASS socket option
> > > >
> > > > /home/linville/git/linux
> > > > [linville-x1.hq.tuxdriver.com]:> git describe --contains
> > > > d346a3fae3ff1
> > > > v3.14-rc1~94^2~564
> > > >
> > > > Is there an example of code in DPDK that requires specific kernel
> > > > versions?  What is the preferred method for coding such dependencies?
> > > >
> > > > John
> > > > --
> > > > John W. Linville		Someday the world will need a hero, and you
> > > > linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org			might be all we have.  Be ready.
> >
> 
> --
> John W. Linville		Someday the world will need a hero, and you
> linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org			might be all we have.  Be ready.