All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Arava, Jairaj" <jairaj.arava@intel.com>
To: Takashi Iwai <tiwai@suse.de>, Pshou <pshou@realtek.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Nujella, Sathyanarayana" <sathyanarayana.nujella@intel.com>,
	"Prabhu, Swarna" <swarna.prabhu@intel.com>,
	"Afzal, Naeem M" <naeem.m.afzal@intel.com>,
	"Hsu, Shui-Wen" <swhsu4021@realtek.com>,
	"Perati, RK" <rk.perati@intel.com>,
	"Mandri, Padmashree" <padmashree.mandri@intel.com>,
	Kailang <kailang@realtek.com>
Subject: RE: Sarien/Dorset device: After system resumed from suspend, 3.5m jack is still shown as detected when unplugged during suspend
Date: Fri, 16 Sep 2022 19:50:51 +0000	[thread overview]
Message-ID: <DM4PR11MB53570968A455F76371004B689F489@DM4PR11MB5357.namprd11.prod.outlook.com> (raw)
In-Reply-To: <874jx7vdhs.wl-tiwai@suse.de>

Hi Takashi,

This discussion is regarding the bug https://bugzilla.kernel.org/show_bug.cgi?id=215297.

As we know https://lore.kernel.org/alsa-devel/20210310112809.9215-3-tiwai@suse.de/ is causing the 3.5mm headset jack detection issue during system suspend resume. So after reverting this patch the issue is not seen since the unsol event is handled without this patch.

Since we  see in https://elixir.bootlin.com/linux/latest/source/sound/pci/hda/patch_realtek.c#L992 the codec driver has  snd_hda_jack_unsol_event as the unsol event handler. Hence after reverting your patch, from https://elixir.bootlin.com/linux/latest/source/sound/pci/hda/hda_bind.c#L56  the driver is calling https://elixir.bootlin.com/linux/latest/source/sound/pci/hda/hda_jack.c#L713 to handle the unsolv event.

Based on above observance, seems snd_hda_jack_unsol_event is mandatory for the intel platform Realtek codec driver to handle such unsolv enets.  Hence, @Pshou added the PM flag check as the patch was tested by Nvidia.

Thanks,
Jai 
-----Original Message-----
From: Takashi Iwai <tiwai@suse.de> 
Sent: Friday, September 16, 2022 3:08 AM
To: Pshou <pshou@realtek.com>
Cc: linux-kernel@vger.kernel.org; Takashi Iwai <tiwai@suse.de>; Arava, Jairaj <jairaj.arava@intel.com>; Nujella, Sathyanarayana <sathyanarayana.nujella@intel.com>; Prabhu, Swarna <swarna.prabhu@intel.com>; Afzal, Naeem M <naeem.m.afzal@intel.com>; Hsu, Shui-Wen <swhsu4021@realtek.com>; Perati, RK <rk.perati@intel.com>; Mandri, Padmashree <padmashree.mandri@intel.com>; Kailang <kailang@realtek.com>
Subject: Re: Sarien/Dorset device: After system resumed from suspend, 3.5m jack is still shown as detected when unplugged during suspend 

On Fri, 16 Sep 2022 07:34:38 +0200,
Pshou wrote:
> 
> 
> Hi Takashi Iwai:
> 
> Can you help me update this PATCH file?
> 
> Check if ignore unsol events duing system suspend/resume and NVIDIA 
> chip in hda_codec_unsol_event().
> 
> Signed-off-by:PeiSen Hou<pshou@realtek.com>
> 
> Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
> 
> diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
> 
> index 1a868dd9dc4b..75560ff6eb83 100644
> 
> --- a/sound/pci/hda/hda_bind.c
> 
> +++ b/sound/pci/hda/hda_bind.c
> 
> @@ -50,7 +50,8 @@ static void hda_codec_unsol_event(struct hdac_device 
> *dev, unsigned int ev)
> 
>        /* ignore unsol events during system suspend/resume */
> 
>       if (codec->core.dev.power.power_state.event != PM_EVENT_ON)
> 
> -               return;
> 
> +              if (codec->core.vendor_id == PCI_VENDOR_ID_NVIDIA)
> 
> +                      return;
> 
>        if (codec->patch_ops.unsol_event)
> 
>               codec->patch_ops.unsol_event(codec, ev);

Hmm, this doesn't look safe.  We also want to avoid the unsol event handling during the PM state transition, too.  So, if any, this should be allowed only at PM_EVENT_SUSPEND or PM_EVENT_HIBERNATE.

Also, checking the codec vendor ID here is no good way.  We may add a new flag for the special behavior (either allowing the unsol handling or prohibiting).

But, from your patch, I don't see any reason *why* this has to be changed in that way.  Could you give more backgrounds?


thanks,

Takashi

  reply	other threads:[~2022-09-16 19:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <ee87941f7f654213924aa1bc79db32f7@realtek.com>
2022-09-16 10:07 ` Sarien/Dorset device: After system resumed from suspend, 3.5m jack is still shown as detected when unplugged during suspend Takashi Iwai
2022-09-16 19:50   ` Arava, Jairaj [this message]
2022-09-17  5:51     ` Takashi Iwai
2022-09-17  6:29       ` Arava, Jairaj

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM4PR11MB53570968A455F76371004B689F489@DM4PR11MB5357.namprd11.prod.outlook.com \
    --to=jairaj.arava@intel.com \
    --cc=kailang@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=naeem.m.afzal@intel.com \
    --cc=padmashree.mandri@intel.com \
    --cc=pshou@realtek.com \
    --cc=rk.perati@intel.com \
    --cc=sathyanarayana.nujella@intel.com \
    --cc=swarna.prabhu@intel.com \
    --cc=swhsu4021@realtek.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.