RE: [PATCH v10 05/12] cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors

["Yuan, Perry" <Perry.Yuan@amd.com>]

[AMD Official Use Only - General]

Hi Wyes. 

> -----Original Message-----
> From: Karny, Wyes <Wyes.Karny@amd.com>
> Sent: Friday, January 6, 2023 7:19 PM
> To: Yuan, Perry <Perry.Yuan@amd.com>; rafael.j.wysocki@intel.com;
> Limonciello, Mario <Mario.Limonciello@amd.com>; Huang, Ray
> <Ray.Huang@amd.com>; viresh.kumar@linaro.org
> Cc: Sharma, Deepak <Deepak.Sharma@amd.com>; Fontenot, Nathan
> <Nathan.Fontenot@amd.com>; Deucher, Alexander
> <Alexander.Deucher@amd.com>; Huang, Shimmer
> <Shimmer.Huang@amd.com>; Du, Xiaojian <Xiaojian.Du@amd.com>; Meng,
> Li (Jassmine) <Li.Meng@amd.com>; linux-pm@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH v10 05/12] cpufreq: amd-pstate: implement Pstate EPP
> support for the AMD processors
> 
> Hi Perry,
> 
> On 1/6/2023 11:44 AM, Perry Yuan wrote:
> ----------------------------------->8-----------------------------------
> ----------------------------------->-------
> > +static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy) {
> > +	int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret;
> > +	struct amd_cpudata *cpudata;
> > +	struct device *dev;
> > +	int rc;
> > +	u64 value;
> 
> Please call `amd_perf_ctl_reset` function here, otherwise amd_pstate would
> behave unexpectedly.

Let me add this reset function for epp driver  in v11 with another Kconfig fix together. 
Thank you. 

Perry. 

> 
> > +
> > +	dev = get_cpu_device(policy->cpu);
> > +	if (!dev)
> > +		goto free_cpudata1;
> > +
> > +	cpudata = kzalloc(sizeof(*cpudata), GFP_KERNEL);
> > +	if (!cpudata)
> > +		return -ENOMEM;
> > +
> > +	cpudata->cpu = policy->cpu;
> > +	cpudata->epp_policy = 0;
> > +
> > +	rc = amd_pstate_init_perf(cpudata);
> > +	if (rc)
> > +		goto free_cpudata1;
> > +
> > +	min_freq = amd_get_min_freq(cpudata);
> > +	max_freq = amd_get_max_freq(cpudata);
> > +	nominal_freq = amd_get_nominal_freq(cpudata);
> > +	lowest_nonlinear_freq = amd_get_lowest_nonlinear_freq(cpudata);
> > +	if (min_freq < 0 || max_freq < 0 || min_freq > max_freq) {
> > +		dev_err(dev, "min_freq(%d) or max_freq(%d) value is
> incorrect\n",
> > +				min_freq, max_freq);
> > +		ret = -EINVAL;
> > +		goto free_cpudata1;
> > +	}
> > +
> > +	policy->cpuinfo.min_freq = min_freq;
> > +	policy->cpuinfo.max_freq = max_freq;
> > +	/* It will be updated by governor */
> > +	policy->cur = policy->cpuinfo.min_freq;
> > +
> > +	/* Initial processor data capability frequencies */
> > +	cpudata->max_freq = max_freq;
> > +	cpudata->min_freq = min_freq;
> > +	cpudata->nominal_freq = nominal_freq;
> > +	cpudata->lowest_nonlinear_freq = lowest_nonlinear_freq;
> > +
> > +	policy->driver_data = cpudata;
> > +
> > +	cpudata->epp_cached = amd_pstate_get_epp(cpudata, value);
> > +
> > +	policy->min = policy->cpuinfo.min_freq;
> > +	policy->max = policy->cpuinfo.max_freq;
> > +
> > +	/*
> > +	 * Set the policy to powersave to provide a valid fallback value in case
> > +	 * the default cpufreq governor is neither powersave nor
> performance.
> > +	 */
> > +	policy->policy = CPUFREQ_POLICY_POWERSAVE;
> > +
> > +	if (boot_cpu_has(X86_FEATURE_CPPC)) {
> > +		policy->fast_switch_possible = true;
> > +		ret = rdmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_REQ,
> &value);
> > +		if (ret)
> > +			return ret;
> > +		WRITE_ONCE(cpudata->cppc_req_cached, value);
> > +
> > +		ret = rdmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
> &value);
> > +		if (ret)
> > +			return ret;
> > +		WRITE_ONCE(cpudata->cppc_cap1_cached, value);
> > +	}
> > +	amd_pstate_boost_init(cpudata);
> > +
> > +	return 0;
> > +
> > +free_cpudata1:
> > +	kfree(cpudata);
> > +	return ret;
> > +}
> > +
> > +static int amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy) {
> > +	pr_debug("CPU %d exiting\n", policy->cpu);
> > +	policy->fast_switch_possible = false;
> > +	return 0;
> > +}
> > +
> > +static void amd_pstate_epp_init(unsigned int cpu) {
> > +	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
> > +	struct amd_cpudata *cpudata = policy->driver_data;
> > +	u32 max_perf, min_perf;
> > +	u64 value;
> > +	s16 epp;
> > +
> > +	max_perf = READ_ONCE(cpudata->highest_perf);
> > +	min_perf = READ_ONCE(cpudata->lowest_perf);
> > +
> > +	value = READ_ONCE(cpudata->cppc_req_cached);
> > +
> > +	if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE)
> > +		min_perf = max_perf;
> > +
> > +	/* Initial min/max values for CPPC Performance Controls Register */
> > +	value &= ~AMD_CPPC_MIN_PERF(~0L);
> > +	value |= AMD_CPPC_MIN_PERF(min_perf);
> > +
> > +	value &= ~AMD_CPPC_MAX_PERF(~0L);
> > +	value |= AMD_CPPC_MAX_PERF(max_perf);
> > +
> > +	/* CPPC EPP feature require to set zero to the desire perf bit */
> > +	value &= ~AMD_CPPC_DES_PERF(~0L);
> > +	value |= AMD_CPPC_DES_PERF(0);
> > +
> > +	if (cpudata->epp_policy == cpudata->policy)
> > +		goto skip_epp;
> > +
> > +	cpudata->epp_policy = cpudata->policy;
> > +
> > +	if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE) {
> > +		epp = amd_pstate_get_epp(cpudata, value);
> > +		if (epp < 0)
> > +			goto skip_epp;
> > +		/* force the epp value to be zero for performance policy */
> > +		epp = 0;
> > +	} else {
> > +		/* Get BIOS pre-defined epp value */
> > +		epp = amd_pstate_get_epp(cpudata, value);
> > +		if (epp)
> > +			goto skip_epp;
> > +	}
> > +	/* Set initial EPP value */
> > +	if (boot_cpu_has(X86_FEATURE_CPPC)) {
> > +		value &= ~GENMASK_ULL(31, 24);
> > +		value |= (u64)epp << 24;
> > +	}
> > +
> > +skip_epp:
> > +	WRITE_ONCE(cpudata->cppc_req_cached, value);
> > +	amd_pstate_set_epp(cpudata, epp);
> > +	cpufreq_cpu_put(policy);
> > +}
> > +
> > +static int amd_pstate_epp_set_policy(struct cpufreq_policy *policy) {
> > +	struct amd_cpudata *cpudata = policy->driver_data;
> > +
> > +	if (!policy->cpuinfo.max_freq)
> > +		return -ENODEV;
> > +
> > +	pr_debug("set_policy: cpuinfo.max %u policy->max %u\n",
> > +				policy->cpuinfo.max_freq, policy->max);
> > +
> > +	cpudata->policy = policy->policy;
> > +
> > +	amd_pstate_epp_init(policy->cpu);
> > +
> > +	return 0;
> > +}
> > +
> > +static int amd_pstate_epp_verify_policy(struct cpufreq_policy_data
> > +*policy) {
> > +	cpufreq_verify_within_cpu_limits(policy);
> > +	pr_debug("policy_max =%d, policy_min=%d\n", policy->max, policy-
> >min);
> > +	return 0;
> > +}
> > +
> >  static struct cpufreq_driver amd_pstate_driver = {
> >  	.flags		= CPUFREQ_CONST_LOOPS |
> CPUFREQ_NEED_UPDATE_LIMITS,
> >  	.verify		= amd_pstate_verify,
> > @@ -627,6 +973,16 @@ static struct cpufreq_driver amd_pstate_driver = {
> >  	.attr		= amd_pstate_attr,
> >  };
> >
> > +static struct cpufreq_driver amd_pstate_epp_driver = {
> > +	.flags		= CPUFREQ_CONST_LOOPS,
> > +	.verify		= amd_pstate_epp_verify_policy,
> > +	.setpolicy	= amd_pstate_epp_set_policy,
> > +	.init		= amd_pstate_epp_cpu_init,
> > +	.exit		= amd_pstate_epp_cpu_exit,
> > +	.name		= "amd_pstate_epp",
> > +	.attr		= amd_pstate_epp_attr,
> > +};
> > +
> >  static int __init amd_pstate_init(void)  {
> >  	int ret;
> > @@ -655,7 +1011,8 @@ static int __init amd_pstate_init(void)
> >  	/* capability check */
> >  	if (boot_cpu_has(X86_FEATURE_CPPC)) {
> >  		pr_debug("AMD CPPC MSR based functionality is
> supported\n");
> > -		amd_pstate_driver.adjust_perf = amd_pstate_adjust_perf;
> > +		if (cppc_state == AMD_PSTATE_PASSIVE)
> > +			current_pstate_driver->adjust_perf =
> amd_pstate_adjust_perf;
> >  	} else {
> >  		pr_debug("AMD CPPC shared memory based functionality is
> supported\n");
> >  		static_call_update(amd_pstate_enable, cppc_enable); @@ -
> 666,14
> > +1023,13 @@ static int __init amd_pstate_init(void)
> >  	/* enable amd pstate feature */
> >  	ret = amd_pstate_enable(true);
> >  	if (ret) {
> > -		pr_err("failed to enable amd-pstate with return %d\n", ret);
> > +		pr_err("failed to enable with return %d\n", ret);
> >  		return ret;
> >  	}
> >
> > -	ret = cpufreq_register_driver(&amd_pstate_driver);
> > +	ret = cpufreq_register_driver(current_pstate_driver);
> >  	if (ret)
> > -		pr_err("failed to register amd_pstate_driver with
> return %d\n",
> > -		       ret);
> > +		pr_err("failed to register with return %d\n", ret);
> >
> >  	return ret;
> >  }
> > @@ -695,6 +1051,12 @@ static int __init amd_pstate_param(char *str)
> >  		if (cppc_state == AMD_PSTATE_DISABLE)
> >  			pr_info("driver is explicitly disabled\n");
> >
> > +		if (cppc_state == AMD_PSTATE_ACTIVE)
> > +			current_pstate_driver = &amd_pstate_epp_driver;
> > +
> > +		if (cppc_state == AMD_PSTATE_PASSIVE)
> > +			current_pstate_driver = &amd_pstate_driver;
> > +
> >  		return 0;
> >  	}
> >
> > diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
> > index dae2ce0f6735..8341a2a2948a 100644
> > --- a/include/linux/amd-pstate.h
> > +++ b/include/linux/amd-pstate.h
> > @@ -47,6 +47,10 @@ struct amd_aperf_mperf {
> >   * @prev: Last Aperf/Mperf/tsc count value read from register
> >   * @freq: current cpu frequency value
> >   * @boost_supported: check whether the Processor or SBIOS supports
> > boost mode
> > + * @epp_policy: Last saved policy used to set energy-performance
> > + preference
> > + * @epp_cached: Cached CPPC energy-performance preference value
> > + * @policy: Cpufreq policy value
> > + * @cppc_cap1_cached Cached MSR_AMD_CPPC_CAP1 register value
> >   *
> >   * The amd_cpudata is key private data for each CPU thread in AMD P-
> State, and
> >   * represents all the attributes and goals that AMD P-State requests at
> runtime.
> > @@ -72,6 +76,12 @@ struct amd_cpudata {
> >
> >  	u64	freq;
> >  	bool	boost_supported;
> > +
> > +	/* EPP feature related attributes*/
> > +	s16	epp_policy;
> > +	s16	epp_cached;
> > +	u32	policy;
> > +	u64	cppc_cap1_cached;
> >  };
> >
> >  /*
> 
> --
> Thanks & Regards,
> Wyes