All of lore.kernel.org
 help / color / mirror / Atom feed
From: Slava Ovsiienko <viacheslavo@nvidia.com>
To: Jan Viktorin <viktorin@cesnet.cz>, Asaf Penso <asafp@nvidia.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Ori Kam <orika@nvidia.com>,
	"Jiawei(Jonny) Wang" <jiaweiw@nvidia.com>
Subject: Re: [dpdk-dev] Duplicating traffic with RTE Flow
Date: Mon, 1 Mar 2021 14:34:07 +0000	[thread overview]
Message-ID: <DM6PR12MB37534C744A4B82FEFC6F222EDF9A9@DM6PR12MB3753.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20210301132126.437df4df@tanguero.localdomain>

Hi, Jan

To use port action (I see it is in your sample action list) the flow should be applied to the FDB domain,
ie "transfer" attribute should be specified:

flow validate 0 ingress transfer...

With best regards, Slava

> -----Original Message-----
> From: Jan Viktorin <viktorin@cesnet.cz>
> Sent: Monday, March 1, 2021 14:21
> To: Asaf Penso <asafp@nvidia.com>
> Cc: dev@dpdk.org; Ori Kam <orika@nvidia.com>; Jiawei(Jonny) Wang
> <jiaweiw@nvidia.com>; Slava Ovsiienko <viacheslavo@nvidia.com>
> Subject: Re: [dpdk-dev] Duplicating traffic with RTE Flow
> 
> Hello Asaf,
> 
> it is a while we were in touch regarding this topic. Finally, I am again trying to
> get work this feature. I've seen that sampling is already upstreamed which is
> great. However, I am not very successful with that. There is nearly no
> documentation, just [1], I found no examples, just commit logs...
> 
> I tried:
> 
>  > set sample_actions 0 port_id id 1 / end  > flow validate 0 ingress pattern
> end actions sample ratio 1 index 0 / drop / end
>  port_flow_complain(): Caught PMD error type 1 (cause unspecified): port id
> action is valid in transfer mode only: Operation not supported  > flow validate
> 0 ingress transfer pattern end actions sample ratio 1 index 0 / drop / end
>  port_flow_complain(): Caught PMD error type 1 (cause unspecified): (no
> stated reason): Operation not supported
> 
> Using CentOS 7, DPDK 20.11.0, OFED-5.2-1.0.4.
> NICs: MT2892 Family [ConnectX-6 Dx] 101d (fw 22.28.1002), MT27800 Family
> [ConnectX-5] 1017 (fw 16.27.2008).
> 
> My primary goal is to be able to deliver exactly the same packets both to
> DPDK and to the Linux kernel. Doing this at RTE Flow level would be great due
> to performance and transparency.
> 
> Jan
> 
> [1] https://doc.dpdk.org/guides/prog_guide/rte_flow.html#action-sample
> 
> On Fri, 18 Sep 2020 14:23:42 +0000
> Asaf Penso <asafp@nvidia.com> wrote:
> 
> > Hello Jan,
> >
> > You can have a look in series [1] where we propose to add APIs to
> DPDK20.11 for both mirroring and sampling for packets, with additional
> actions of the different traffic.
> >
> > [1]
> > http://patches.dpdk.org/project/dpdk/list/?series=12045
> >
> > Regards,
> > Asaf Penso
> >
> > >-----Original Message-----
> > >From: dev <dev-bounces@dpdk.org> On Behalf Of Jan Viktorin
> > >Sent: Friday, September 18, 2020 3:56 PM
> > >To: dev@dpdk.org
> > >Subject: [dpdk-dev] Duplicating traffic with RTE Flow
> > >
> > >Hello all,
> > >
> > >we are looking for a way to duplicate ingress traffic in hardware.
> > >
> > >There is an example in [1] suggesting to insert two fate actions into
> > >the RTE Flow actions array like:
> > >
> > >  flow create 0 ingress pattern end \
> > >      actions queue index 0 / void / queue index 1 / end
> > >
> > >But our experience is that PMDs reject two fate actions (tried with
> > >mlx5). Another similar approach would be to deliver every single
> > >packet into two virtual
> > >functions:
> > >
> > >  flow create 0 ingress pattern end \
> > >     actions vf index 0 / vf index 1 / end
> > >
> > >Third possibility was to use passthru:
> > >
> > >  flow create 0 ingress pattern end \
> > >      actions passthru / vf index 0 / end  flow create 0 ingress
> > > pattern end \
> > >      actions vf index 1 / end
> > >
> > >Again, tried on mlx5 and it does not support the passthru.
> > >
> > >Last idea was to use isolate with passthru (to deliver both to DPDK
> > >application and to the kernel) but again there was no support on mlx5 for
> passthru...
> > >
> > >  flow isolate 0 true
> > >  flow create 0 ingress pattern end actions passthru / rss end / end
> > >
> > >Is there any other possibility or PMD+NIC that is known to solve such
> issue?
> > >
> > >Thanks
> > >Jan Viktorin
> > >
> > >[1]
> > >https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdoc
> > >.dpdk
> > >.org%2Fguides%2Fprog_guide%2Frte_flow.html%23table-rte-flow-redirect-
> > >queue-5-
> >
> >3&amp;data=02%7C01%7Casafp%40nvidia.com%7C1a46005bec5245e729e70
> 8d
> >
> >85bd24caf%7C43083d15727340c1b7db39efd9ccc17a%7C0%7C0%7C63736030
> 60
> >
> >73519816&amp;sdata=EOF%2Fz62crvBZK8rwzwKIWxj5cVlfPVnU3FLmcL9X2w0
> %3
> > >D&amp;reserved=0


  reply	other threads:[~2021-03-01 14:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-18 12:56 [dpdk-dev] Duplicating traffic with RTE Flow Jan Viktorin
2020-09-18 14:23 ` Asaf Penso
2020-09-21 20:03   ` Jan Viktorin
2020-09-23  2:28     ` Jiawei(Jonny) Wang
2020-09-23  8:29       ` Jan Viktorin
2020-09-27  6:33         ` Jiawei(Jonny) Wang
2021-03-01 12:21   ` Jan Viktorin
2021-03-01 14:34     ` Slava Ovsiienko [this message]
2021-03-01 14:43       ` Jan Viktorin
2021-03-11  2:11         ` Jiawei(Jonny) Wang
2021-03-11 16:32           ` Jan Viktorin
2021-03-12  9:32             ` Jiawei(Jonny) Wang
2021-03-15 13:22               ` Jan Viktorin
2021-03-15 17:57                 ` Jan Viktorin
2021-03-16  4:00                 ` Jiawei(Jonny) Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM6PR12MB37534C744A4B82FEFC6F222EDF9A9@DM6PR12MB3753.namprd12.prod.outlook.com \
    --to=viacheslavo@nvidia.com \
    --cc=asafp@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=jiaweiw@nvidia.com \
    --cc=orika@nvidia.com \
    --cc=viktorin@cesnet.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.