Re: [PATCH 0/5] 0 MHz is not a valid current frequency

["Lazar, Lijo" <Lijo.Lazar@amd.com>]

[-- Attachment #1: Type: text/plain, Size: 3038 bytes --]

[AMD Official Use Only]

>Or maybe just a list without default hint, i.e. no asterisk?

I think this is also fine meaning we are having trouble in determining the current frequency or DPM level. Evan/Alex? Don't know if this will crash the tools.

Thanks,
Lijo
________________________________
From: Tuikov, Luben <Luben.Tuikov@amd.com>
Sent: Wednesday, October 13, 2021 9:52:09 PM
To: Lazar, Lijo <Lijo.Lazar@amd.com>; amd-gfx@lists.freedesktop.org <amd-gfx@lists.freedesktop.org>
Cc: Deucher, Alexander <Alexander.Deucher@amd.com>
Subject: Re: [PATCH 0/5] 0 MHz is not a valid current frequency

On 2021-10-13 00:14, Lazar, Lijo wrote:
>
> On 10/13/2021 8:40 AM, Luben Tuikov wrote:
>> Some ASIC support low-power functionality for the whole ASIC or just
>> an IP block. When in such low-power mode, some sysfs interfaces would
>> report a frequency of 0, e.g.,
>>
>> $cat /sys/class/drm/card0/device/pp_dpm_sclk
>> 0: 500Mhz
>> 1: 0Mhz *
>> 2: 2200Mhz
>> $_
>>
>> An operating frequency of 0 MHz doesn't make sense, and this interface
>> is designed to report only operating clock frequencies, i.e. non-zero,
>> and possibly the current one.
>>
>> When in this low-power state, round to the smallest
>> operating frequency, for this interface, as follows,
>>
> Would rather avoid this -
>
> 1) It is manipulating FW reported value. If at all there is an uncaught
> issue in FW reporting of frequency values, that is masked here.
> 2) Otherwise, if 0MHz is described as GFX power gated case, this
> provides a convenient interface to check if GFX is power gated.
>
> If seeing a '0' is not pleasing, consider changing to something like
>        "NA" - not available (frequency cannot be fetched at the moment).

There's a ROCm tool which literally asserts if the values are not ordered in increasing order. Now since 0 < 550, but 0 is listed as the second entry, the tool simply asserts and crashes.

It is not clear what you'd rather see here:

$cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 550Mhz
1: N/A *
2: 2200MHz
$_

Is this what you want to see? (That'll crash other tools which expect %uMhz.)

Or maybe just a list without default hint, i.e. no asterisk?

$cat /sys/class/drm/card0/device/pp_dpm_sclk
0: 550Mhz
1: 2200MHz
$_

What should the output be?

We want to avoid showing 0, but still show numbers.

Regards,
Luben

>
> Thanks,
> Lijo
>
>> $cat /sys/class/drm/card0/device/pp_dpm_sclk
>> 0: 500Mhz *
>> 1: 2200Mhz
>> $_
>>
>> Luben Tuikov (5):
>>    drm/amd/pm: Slight function rename
>>    drm/amd/pm: Rename cur_value to curr_value
>>    drm/amd/pm: Rename freq_values --> freq_value
>>    dpm/amd/pm: Sienna: 0 MHz is not a current clock frequency
>>    dpm/amd/pm: Navi10: 0 MHz is not a current clock frequency
>>
>>   .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c   | 60 +++++++++------
>>   .../amd/pm/swsmu/smu11/sienna_cichlid_ppt.c   | 73 ++++++++++++-------
>>   2 files changed, 86 insertions(+), 47 deletions(-)
>>


[-- Attachment #2: Type: text/html, Size: 5034 bytes --]