From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keir Fraser Subject: Re: Problems booting on a Dual-Xeon with 2.4 and 2.6 kernels Date: Tue, 10 Aug 2004 00:07:23 +0100 Sender: xen-devel-admin@lists.sourceforge.net Message-ID: References: <200408092245170093.0089E7E4@mail.gmx.de> Return-path: In-Reply-To: Your message of "Mon, 09 Aug 2004 22:45:17 +0200." <200408092245170093.0089E7E4@mail.gmx.de> Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: sven.kretzschmar@gmx.de Cc: xen-devel@lists.sourceforge.net List-Id: xen-devel@lists.xenproject.org > Then during boot of the 2.6 kernel I got the following message during boot: > > fixmap and kmap areas overlap - this will crash > pkstart: ff800000h pkend: ffc00000h fixstart fbeec000h > ... > kernel BUG at arch/xen/i386/mm/init.c:583! > invalid operand: 0000 [#1] > ... > <0>Kernel panic: Attempted to kill the idel task! > In idle task - not syncing This is due to CONFIG_HIGHMEM currently being broken in our Linux 2.6 port. I guess fixing it won't be very hard. > During boot, the boot process of the newly installed kernel > showed that it recognizes the two 3ware Controlers, but then reports the > following errors: > 3w-xxxx: scsi0: Unit #0: Command(c7f92b00) timed out, resetting card. > 3w-xxxx: scsi0: Unit #0: Command(c7f92b00) timed out, resetting card. > 3w-xxxx: scsi0: Reset succeeded. > > Then it freezes and nothing more happens. > I don't know if the boot process would have continued without the 3ware > drivers, because I have no non-raid disks in this machine... I'll have a look at the driver. Maybe it's communicating with the controller in a strange way. -- Keir ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285