From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752153AbcDTQUz (ORCPT ); Wed, 20 Apr 2016 12:20:55 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:57274 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751450AbcDTQUU (ORCPT ); Wed, 20 Apr 2016 12:20:20 -0400 From: Mark Brown To: Wadim Egorov Cc: Mark Brown , linux-kernel@vger.kernel.org, broonie@kernel.org, lgirdwood@gmail.com In-Reply-To: <1461139268-45957-2-git-send-email-w.egorov@phytec.de> Message-Id: Date: Wed, 20 Apr 2016 17:20:07 +0100 X-SA-Exim-Connect-IP: 2a01:348:6:8808:fab::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: fan53555: Add support for FAN53555UC13X type" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: fan53555: Add support for FAN53555UC13X type has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From e57cbb70b7b3773f78fc6b8b70ab1eb3367e5350 Mon Sep 17 00:00:00 2001 From: Wadim Egorov Date: Wed, 20 Apr 2016 10:01:08 +0200 Subject: [PATCH] regulator: fan53555: Add support for FAN53555UC13X type IC type options 00, 13 and 23 are sharing the same DIE_ID 0. Let's differentiate between these revisions. FAN53555UC13X has the ID 0 and REV 0xf, starts at 800mV and increments in 10mV steps. Signed-off-by: Wadim Egorov Signed-off-by: Mark Brown --- drivers/regulator/fan53555.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index d4bfa9312724..d7da81a875cf 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -68,6 +68,12 @@ enum { FAN53555_CHIP_ID_08 = 8, }; +/* IC mask revision */ +enum { + FAN53555_CHIP_REV_00 = 0x3, + FAN53555_CHIP_REV_13 = 0xf, +}; + enum { SILERGY_SYR82X = 8, }; @@ -218,6 +224,22 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) /* Init voltage range and step */ switch (di->chip_id) { case FAN53555_CHIP_ID_00: + switch (di->chip_rev) { + case FAN53555_CHIP_REV_00: + di->vsel_min = 600000; + di->vsel_step = 10000; + break; + case FAN53555_CHIP_REV_13: + di->vsel_min = 800000; + di->vsel_step = 10000; + break; + default: + dev_err(di->dev, + "Chip ID %d with rev %d not supported!\n", + di->chip_id, di->chip_rev); + return -EINVAL; + } + break; case FAN53555_CHIP_ID_01: case FAN53555_CHIP_ID_03: case FAN53555_CHIP_ID_05: -- 2.8.0.rc3