From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755800AbcEaRqp (ORCPT ); Tue, 31 May 2016 13:46:45 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:58750 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755647AbcEaRqd (ORCPT ); Tue, 31 May 2016 13:46:33 -0400 From: Mark Brown To: Axel Lin Cc: Laxman Dewangan , Mark Brown , Mark Brown , Laxman Dewangan , Liam Girdwood , linux-kernel@vger.kernel.org In-Reply-To: <1464686760.11354.1.camel@ingics.com> Message-Id: Date: Tue, 31 May 2016 18:46:21 +0100 X-SA-Exim-Connect-IP: 2a01:348:6:8808:fab::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: tps51632: Fix setting ramp delay" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: Yes (on mezzanine.sirena.org.uk) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: tps51632: Fix setting ramp delay has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From c714a588fc39dc8c8f70014f5691217717983fb3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 31 May 2016 17:26:00 +0800 Subject: [PATCH] regulator: tps51632: Fix setting ramp delay According to the datasheet: SLEW Register(Address = 07h) b7 b6 b5 b4 b3 b2 b1 b0 48mV/us 42mV/us 36mV/us 30mV/us 24mV/us 18mV/us 12mV/us 6mV/us Current code does not set correct slew rate in some cases: e.g. Assume ramp_delay is 10000, current code sets slew register to 6mV/us. Fix the logic to set slew register. Signed-off-by: Axel Lin Acked-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/tps51632-regulator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index 572816e30095..c139890c1514 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct tps51632_chip *tps = rdev_get_drvdata(rdev); - int bit = ramp_delay/6000; + int bit; int ret; - if (bit) - bit--; + if (ramp_delay == 0) + bit = 0; + else + bit = DIV_ROUND_UP(ramp_delay, 6000) - 1; + ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit)); if (ret < 0) dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret); -- 2.8.1