From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Brown Subject: Applied "ASoC: tlv320aic3x: Add delay after power on and register sync" to the asoc tree Date: Sat, 31 Dec 2016 19:19:10 +0000 Message-ID: References: <20161223092112.7992-3-peter.ujfalusi@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mezzanine.sirena.org.uk (mezzanine.sirena.org.uk [106.187.55.193]) by alsa0.perex.cz (Postfix) with ESMTP id 4AC0F2670BE for ; Sat, 31 Dec 2016 20:19:18 +0100 (CET) In-Reply-To: <20161223092112.7992-3-peter.ujfalusi@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Peter Ujfalusi Cc: alsa-devel@alsa-project.org, Mark Brown , jsarha@ti.com, Liam Girdwood , jarkko.nikula@bitmer.com List-Id: alsa-devel@alsa-project.org The patch ASoC: tlv320aic3x: Add delay after power on and register sync has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 03303da5243f394f5cc5e530a8bc9f26ad2c79cb Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 23 Dec 2016 11:21:11 +0200 Subject: [PATCH] ASoC: tlv320aic3x: Add delay after power on and register sync When the codec is powered on, it's registers are in reset state as the power off will do a soft reset of the codec. After the register sync we need to add delay to remove the pop-noise on stream start. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic3x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index bb94d50052d7..29bf8c81ae02 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1393,6 +1393,12 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power) snd_soc_write(codec, AIC3X_PLL_PROGC_REG, pll_c); snd_soc_write(codec, AIC3X_PLL_PROGD_REG, pll_d); } + + /* + * Delay is needed to reduce pop-noise after syncing back the + * registers + */ + mdelay(50); } else { /* * Do soft reset to this codec instance in order to clear -- 2.11.0