Applied "ASoC: Intel: cht_bsw_rt5645: cosmetic fixes" to the asoc tree

[Mark Brown <broonie@kernel.org>]

The patch

   ASoC: Intel: cht_bsw_rt5645: cosmetic fixes

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6cdf01a5addfd3a2b2918fccc76535f20eb2cda9 Mon Sep 17 00:00:00 2001
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Date: Thu, 12 Oct 2017 18:37:59 -0500
Subject: [PATCH] ASoC: Intel: cht_bsw_rt5645: cosmetic fixes

Reorder variable names, change MCLK test, change quirks
No functional change

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/intel/boards/cht_bsw_rt5645.c | 73 ++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 38 deletions(-)

diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c
index d553e2b67c92..6ccb599c1082 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -21,13 +21,13 @@
  */
 
 #include <linux/module.h>
-#include <linux/acpi.h>
 #include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <asm/cpu_device_id.h>
 #include <asm/platform_sst_audio.h>
-#include <linux/clk.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -53,7 +53,7 @@ struct cht_mc_private {
 	struct clk *mclk;
 };
 
-#define CHT_RT5645_MAP(quirk)	((quirk) & 0xff)
+#define CHT_RT5645_MAP(quirk)	((quirk) & GENMASK(7, 0))
 #define CHT_RT5645_SSP2_AIF2     BIT(16) /* default is using AIF1  */
 #define CHT_RT5645_SSP0_AIF1     BIT(17)
 #define CHT_RT5645_SSP0_AIF2     BIT(18)
@@ -101,13 +101,11 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	}
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
-		if (ctx->mclk) {
-			ret = clk_prepare_enable(ctx->mclk);
-			if (ret < 0) {
-				dev_err(card->dev,
-					"could not configure MCLK state");
-				return ret;
-			}
+		ret = clk_prepare_enable(ctx->mclk);
+		if (ret < 0) {
+			dev_err(card->dev,
+				"could not configure MCLK state");
+			return ret;
 		}
 	} else {
 		/* Set codec sysclk source to its internal clock because codec PLL will
@@ -122,8 +120,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 			return ret;
 		}
 
-		if (ctx->mclk)
-			clk_disable_unprepare(ctx->mclk);
+		clk_disable_unprepare(ctx->mclk);
 	}
 
 	return 0;
@@ -258,11 +255,11 @@ static const struct dmi_system_id cht_rt5645_quirk_table[] = {
 
 static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 {
-	int ret;
-	int jack_type;
-	struct snd_soc_codec *codec = runtime->codec;
 	struct snd_soc_card *card = runtime->card;
 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
+	struct snd_soc_codec *codec = runtime->codec;
+	int jack_type;
+	int ret;
 
 	if ((cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) ||
 	    (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) {
@@ -320,26 +317,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
 
 	rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack);
 
-	if (ctx->mclk) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(ctx->mclk);
-		if (!ret)
-			clk_disable_unprepare(ctx->mclk);
 
-		ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+	/*
+	 * The firmware might enable the clock at
+	 * boot (this information may or may not
+	 * be reflected in the enable clock register).
+	 * To change the rate we must disable the clock
+	 * first to cover these cases. Due to common
+	 * clock framework restrictions that do not allow
+	 * to disable a clock that has not been enabled,
+	 * we need to enable the clock first.
+	 */
+	ret = clk_prepare_enable(ctx->mclk);
+	if (!ret)
+		clk_disable_unprepare(ctx->mclk);
+
+	ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+	if (ret)
+		dev_err(runtime->dev, "unable to set MCLK rate\n");
 
-		if (ret)
-			dev_err(runtime->dev, "unable to set MCLK rate\n");
-	}
 	return ret;
 }
 
@@ -545,15 +542,15 @@ struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
 
 static int snd_cht_mc_probe(struct platform_device *pdev)
 {
-	int ret_val = 0;
-	int i;
-	struct cht_mc_private *drv;
 	struct snd_soc_card *card = snd_soc_cards[0].soc_card;
 	struct sst_acpi_mach *mach;
+	struct cht_mc_private *drv;
 	const char *i2c_name = NULL;
-	int dai_index = 0;
 	bool found = false;
 	bool is_bytcr = false;
+	int dai_index = 0;
+	int ret_val = 0;
+	int i;
 
 	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
 	if (!drv)
@@ -590,7 +587,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 
 	/* fixup codec name based on HID */
 	i2c_name = sst_acpi_find_name_from_hid(mach->id);
-	if (i2c_name != NULL) {
+	if (i2c_name) {
 		snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name),
 			"%s%s", "i2c-", i2c_name);
 		cht_dailink[dai_index].codec_name = cht_rt5645_codec_name;
-- 
2.14.1