From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753840AbeDRL6n (ORCPT ); Wed, 18 Apr 2018 07:58:43 -0400 Received: from heliosphere.sirena.org.uk ([172.104.155.198]:39160 "EHLO heliosphere.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753713AbeDRL6k (ORCPT ); Wed, 18 Apr 2018 07:58:40 -0400 From: Mark Brown To: Anson Huang Cc: Robin Gong , Mark Brown , yibin.gong@nxp.com, shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, lgirdwood@gmail.com, broonie@kernel.org, Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Applied "regulator: pfuze100: update voltage setting for pfuze3000 sw1a" to the regulator tree In-Reply-To: <1521269828-8874-2-git-send-email-Anson.Huang@nxp.com> Message-Id: Date: Wed, 18 Apr 2018 12:58:26 +0100 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The patch regulator: pfuze100: update voltage setting for pfuze3000 sw1a has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 1dced996ee702e6af82a57c7b6c56b0cceaa6425 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 18 Mar 2018 11:23:21 +0800 Subject: [PATCH] regulator: pfuze100: update voltage setting for pfuze3000 sw1a pfuze3000 datasheet(Rev.9.0) from: https://www.nxp.com/docs/en/data-sheet/PF3000.pdf updates sw1a's voltage range, the settings for 1.450V and 1.475V are replaced with 1.8V and 3.3V: 5b'11110 1.450 (SW1B), 1.8 (SW1A/SW1AB) 5b'11111 1.475 (SW1B), 3.3 (SW1A/SW1AB) the voltage calculation using steps is NOT available for sw1a now, use voltage table instead. Signed-off-by: Anson Huang Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- drivers/regulator/pfuze100-regulator.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 63922a2167e5..680f076e3d85 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -86,6 +86,13 @@ static const int pfuze100_coin[] = { 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; +static const int pfuze3000_sw1a[] = { + 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000, +}; + static const int pfuze3000_sw2lo[] = { 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, }; @@ -343,7 +350,7 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), -- 2.17.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Brown Subject: Applied "regulator: pfuze100: update voltage setting for pfuze3000 sw1a" to the regulator tree Date: Wed, 18 Apr 2018 12:58:26 +0100 Message-ID: References: <1521269828-8874-2-git-send-email-Anson.Huang@nxp.com> Return-path: In-Reply-To: <1521269828-8874-2-git-send-email-Anson.Huang@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: Anson Huang Cc: Robin Gong , Mark Brown yibin.gong@nxp.com, shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, lgirdwood@gmail.combroonie@kernel.org, Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.orglinux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The patch regulator: pfuze100: update voltage setting for pfuze3000 sw1a has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 1dced996ee702e6af82a57c7b6c56b0cceaa6425 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 18 Mar 2018 11:23:21 +0800 Subject: [PATCH] regulator: pfuze100: update voltage setting for pfuze3000 sw1a pfuze3000 datasheet(Rev.9.0) from: https://www.nxp.com/docs/en/data-sheet/PF3000.pdf updates sw1a's voltage range, the settings for 1.450V and 1.475V are replaced with 1.8V and 3.3V: 5b'11110 1.450 (SW1B), 1.8 (SW1A/SW1AB) 5b'11111 1.475 (SW1B), 3.3 (SW1A/SW1AB) the voltage calculation using steps is NOT available for sw1a now, use voltage table instead. Signed-off-by: Anson Huang Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- drivers/regulator/pfuze100-regulator.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 63922a2167e5..680f076e3d85 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -86,6 +86,13 @@ static const int pfuze100_coin[] = { 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; +static const int pfuze3000_sw1a[] = { + 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000, +}; + static const int pfuze3000_sw2lo[] = { 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, }; @@ -343,7 +350,7 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), -- 2.17.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: broonie@kernel.org (Mark Brown) Date: Wed, 18 Apr 2018 12:58:26 +0100 Subject: Applied "regulator: pfuze100: update voltage setting for pfuze3000 sw1a" to the regulator tree In-Reply-To: <1521269828-8874-2-git-send-email-Anson.Huang@nxp.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The patch regulator: pfuze100: update voltage setting for pfuze3000 sw1a has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >>From 1dced996ee702e6af82a57c7b6c56b0cceaa6425 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 18 Mar 2018 11:23:21 +0800 Subject: [PATCH] regulator: pfuze100: update voltage setting for pfuze3000 sw1a pfuze3000 datasheet(Rev.9.0) from: https://www.nxp.com/docs/en/data-sheet/PF3000.pdf updates sw1a's voltage range, the settings for 1.450V and 1.475V are replaced with 1.8V and 3.3V: 5b'11110 1.450 (SW1B), 1.8 (SW1A/SW1AB) 5b'11111 1.475 (SW1B), 3.3 (SW1A/SW1AB) the voltage calculation using steps is NOT available for sw1a now, use voltage table instead. Signed-off-by: Anson Huang Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- drivers/regulator/pfuze100-regulator.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 63922a2167e5..680f076e3d85 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -86,6 +86,13 @@ static const int pfuze100_coin[] = { 2500000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000, }; +static const int pfuze3000_sw1a[] = { + 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, 1400000, 1425000, 1800000, 3300000, +}; + static const int pfuze3000_sw2lo[] = { 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, }; @@ -343,7 +350,7 @@ static struct pfuze_regulator pfuze200_regulators[] = { }; static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), -- 2.17.0