From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4C207C10DCE for ; Wed, 18 Mar 2020 14:26:02 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 19FA920772 for ; Wed, 18 Mar 2020 14:26:02 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="GnA7G9e5"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=crapouillou.net header.i=@crapouillou.net header.b="IALK9uCI" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 19FA920772 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=crapouillou.net Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Message-ID:Sender:Content-Type: Content-Transfer-Encoding:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:To:Subject:From: Date:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=wOFrhCCCUh8T608dYPt+YlZ8db1Bg/dpqXrgFbSaEvc=; b=GnA7G9e5OGnNjfcSd269lERAQq w+LqkI7gEkVohVzxWGg3TuL9oTodbD4FqGIczoZKG/LSvjec5JyVQqUP78PfdoSbVeV463Lb+iDPw geh9OGrjgHY1VT25KKU91lzNmWMP7iIZYI79/4W/JBxhUnVyRfYCInpDgVTIHVfsCbx2putegXBOW J6mhJiTuAs7rdKXEohq/+yuMaj+GutyN54j0Veis/IgnJ4cDcnyvWu+DOtwmq+sLFRkbV9fK8tIqY h1H9r+rGXvDIGUJ00IB7YWOW6wfR7burwAYd8FBVMqatvZAViVSfVg1GGinKka3qM6dv0JyGmAnYb Yt1NgKuA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jEZdu-0001fE-0s; Wed, 18 Mar 2020 14:25:58 +0000 Received: from outils.crapouillou.net ([89.234.176.41] helo=crapouillou.net) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jEZdp-0001e8-HT for linux-arm-kernel@lists.infradead.org; Wed, 18 Mar 2020 14:25:56 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=crapouillou.net; s=mail; t=1584541540; h=from:from:sender:reply-to:subject:subject:date:date:message-id:to:to: cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=XoZs/iGNg5X0SFbIXdwyhUZP+FOxe40B9STaGSo4ZLY=; b=IALK9uCI9hw9JzT8JratsRArxBeW1mY0F9RkKn4OCaCapNSTyTOEWDu8xlr3qScU3dKvbx g1CM/jSfq+/eK5Vp79vuUkPcKXnMtql10EjmREsZb/Gq/MUbwz7l8Qe0gQ/P9INXHwJh/v C0hD8/OpCqlQnbwc6W9IVwNkxoUi2CE= Date: Wed, 18 Mar 2020 15:25:22 +0100 From: Paul Cercueil Subject: Re: [PATCH 2/2] ARM: DTS: Add devicetree file for the Galaxy S2 To: Krzysztof Kozlowski In-Reply-To: <20200313090011.GB7416@pi3> References: <20200312153411.13535-1-paul@crapouillou.net> <20200312153411.13535-2-paul@crapouillou.net> <20200313090011.GB7416@pi3> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200318_072554_292696_EBEE90DB X-CRM114-Status: GOOD ( 21.45 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , devicetree@vger.kernel.org, Stenkin Evgeniy , linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Kukjin Kim , linux-arm-kernel@lists.infradead.org, Marek Szyprowski Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" Sender: "linux-arm-kernel" Message-ID: Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Krzysztof, Le ven. 13 mars 2020 =E0 10:00, Krzysztof Kozlowski a = =E9crit : > On Thu, Mar 12, 2020 at 04:34:11PM +0100, Paul Cercueil wrote: >> From: Stenkin Evgeniy >> = >> Add devicetree file for the Exynos 4210 based Galaxy S2 (i9100 = >> version). > = > Thanks for the patch! > = > It is an GT-I9100. > = > +Cc Marek (I have few questions further) > = > = >> = >> Signed-off-by: Stenkin Evgeniy >> Signed-off-by: Paul Cercueil >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos4210-i9100.dts | 816 = >> +++++++++++++++++++++++++ >> 2 files changed, 817 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts >> = >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index d6546d2676b9..522436d30690 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) +=3D \ >> exynos3250-monk.dtb \ >> exynos3250-rinato.dtb >> dtb-$(CONFIG_ARCH_EXYNOS4) +=3D \ >> + exynos4210-i9100.dtb \ >> exynos4210-origen.dtb \ >> exynos4210-smdkv310.dtb \ >> exynos4210-trats.dtb \ >> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts = >> b/arch/arm/boot/dts/exynos4210-i9100.dts >> new file mode 100644 >> index 000000000000..c218e34959be >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts >> @@ -0,0 +1,816 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Samsung's Exynos4210 based Galaxy S2 (i9100 version) device tree > = > Ditto > = >> + * >> + * Copyright (c) 2012 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * Copyright (c) 2020 Stenkin Evgeniy >> + * Copyright (c) 2020 Paul Cercueil >> + * >> + * Device tree source file for Samsung's Galaxy S2 smartphone = >> (i9100 version), >> + * which is based on Samsung's Exynos4210 SoC. > = > Duplicated description, you mentioned it before. > = >> + */ >> + >> +/dts-v1/; >> +#include "exynos4210.dtsi" >> +#include "exynos4412-ppmu-common.dtsi" >> + >> +#include >> +#include >> + >> +/ { >> + model =3D "Samsung Galaxy S2 (i9100)"; > = > GT-I9100 > = >> + compatible =3D "samsung,i9100", "samsung,exynos4210", = >> "samsung,exynos4"; > = > I think it shares a lot with Trats board... > = > Marek, how similar these > designs are? Maybe it is worth to split some parts and make common = > part? > = >> + >> + >> + memory@40000000 { >> + device_type =3D "memory"; >> + reg =3D <0x40000000 0x40000000>; >> + }; >> + > = > You do not have a chosen node, at least for stdout serial selection. > Probably you should have one... bootargs I guess could come from > bootloader. > = > = >> + vemmc_reg: regulator-0 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "VMEM_VDD_2.8V"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + gpio =3D <&gpk0 2 GPIO_ACTIVE_HIGH>; >> + enable-active-high; > = > This looks like a stub/fake regulator. Probably it shoould be replaced > with proper regulator coming from PMIC (few seems to be missing = > there). > = > I don't have the schematics so I cannot judge... I see Trats has the > same. > = > Marek, mayybe you know, is it really a separate regulator? > = >> + }; >> + >> + tsp_reg: regulator-1 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "TSP_FIXED_VOLTAGES"; >> + regulator-min-microvolt =3D <3300000>; >> + regulator-max-microvolt =3D <3300000>; >> + gpio =3D <&gpl0 3 GPIO_ACTIVE_HIGH>; >> + startup-delay-us =3D <70000>; >> + enable-active-high; >> + regulator-boot-on; >> + regulator-always-on; > = > always-on and boot-on should not be needed. You have a consumer for = > this > regulator. About this: the touchscreen driver does not use a regulator, so I = believe that's why these properties were here. I sent patches upstream to address the issue: = https://lkml.org/lkml/2020/3/15/94 I believe this means I cannot merge the i9100 devicetree until it is = acked. -Paul >> + }; >> + >> + cam_af_28v_reg: regulator-3 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "8M_AF_2.8V_EN"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + gpio =3D <&gpk1 1 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + }; >> + >> + cam_io_en_reg: regulator-4 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "CAM_IO_EN"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + gpio =3D <&gpe2 1 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + }; >> + >> + cam_io_12v_reg: regulator-5 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "8M_1.2V_EN"; >> + regulator-min-microvolt =3D <1200000>; >> + regulator-max-microvolt =3D <1200000>; >> + gpio =3D <&gpe2 5 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + }; >> + >> + vt_core_15v_reg: regulator-6 { >> + compatible =3D "regulator-fixed"; >> + regulator-name =3D "VT_CORE_1.5V"; >> + regulator-min-microvolt =3D <1500000>; >> + regulator-max-microvolt =3D <1500000>; >> + gpio =3D <&gpe2 2 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + }; >> + >> + gpio-keys { >> + compatible =3D "gpio-keys"; >> + >> + vol-down { >> + gpios =3D <&gpx2 1 GPIO_ACTIVE_LOW>; >> + linux,code =3D ; >> + label =3D "volume down"; >> + debounce-interval =3D <10>; >> + }; >> + >> + vol-up { >> + gpios =3D <&gpx2 0 GPIO_ACTIVE_LOW>; >> + linux,code =3D ; >> + label =3D "volume up"; >> + debounce-interval =3D <10>; >> + }; >> + >> + power { >> + gpios =3D <&gpx2 7 GPIO_ACTIVE_LOW>; >> + linux,code =3D ; >> + label =3D "power"; >> + debounce-interval =3D <10>; >> + wakeup-source; >> + }; >> + >> + ok { >> + gpios =3D <&gpx3 5 GPIO_ACTIVE_LOW>; >> + linux,code =3D ; >> + label =3D "ok"; >> + debounce-interval =3D <10>; >> + }; >> + }; >> + >> + wlan_pwrseq: sdhci3-pwrseq { >> + compatible =3D "mmc-pwrseq-simple"; >> + reset-gpios =3D <&gpl1 2 GPIO_ACTIVE_LOW>; >> + }; >> + >> + i2c_max17042_fuel: i2c-gpio-3 { > = > i2c-gpio-3 -> i2c-gpio > = >> + compatible =3D "i2c-gpio"; >> + #address-cells =3D <1>; >> + #size-cells =3D <0>; >> + >> + sda-gpios =3D <&gpy4 0 GPIO_ACTIVE_HIGH>; >> + scl-gpios =3D <&gpy4 1 GPIO_ACTIVE_HIGH>; >> + i2c-gpio,delay-us =3D <5>; >> + >> + battery@36 { >> + compatible =3D "maxim,max17042"; >> + >> + interrupt-parent =3D <&gpx2>; >> + interrupts =3D <3 2>; > = > s/2/IRQ_TYPE_EDGE_FALLING/ > = >> + >> + pinctrl-0 =3D <&max17042_fuel_irq>; >> + pinctrl-names =3D "default"; >> + >> + reg =3D <0x36>; >> + maxim,over-heat-temp =3D <700>; >> + maxim,over-volt =3D <4500>; >> + > = > Remove empty line. > = >> + }; >> + }; >> + >> + spi-lcd { >> + compatible =3D "spi-gpio"; >> + #address-cells =3D <1>; >> + #size-cells =3D <0>; >> + >> + num-chipselects =3D <1>; >> + cs-gpios =3D <&gpy4 3 GPIO_ACTIVE_HIGH>; >> + sck-gpios =3D <&gpy3 1 GPIO_ACTIVE_HIGH>; >> + mosi-gpios =3D <&gpy3 3 GPIO_ACTIVE_HIGH>; >> + >> + lcd@0 { >> + compatible =3D "samsung,ld9040"; >> + reg =3D <0>; >> + >> + spi-max-frequency =3D <1200000>; >> + spi-cpol; >> + spi-cpha; >> + >> + vdd3-supply =3D <&vmipi_reg>; >> + vci-supply =3D <&vcclcd_reg>; >> + >> + reset-gpios =3D <&gpy4 5 GPIO_ACTIVE_HIGH>; >> + power-on-delay =3D <10>; >> + reset-delay =3D <10>; >> + >> + panel-width-mm =3D <90>; >> + panel-height-mm =3D <154>; >> + >> + display-timings { >> + timing { >> + clock-frequency =3D <23492370>; >> + hactive =3D <480>; >> + vactive =3D <800>; >> + hback-porch =3D <16>; >> + hfront-porch =3D <16>; >> + vback-porch =3D <2>; >> + vfront-porch =3D <28>; >> + hsync-len =3D <2>; >> + vsync-len =3D <1>; >> + hsync-active =3D <0>; >> + vsync-active =3D <0>; >> + de-active =3D <0>; >> + pixelclk-active =3D <0>; >> + }; >> + }; >> + >> + port { >> + lcd_ep: endpoint { >> + remote-endpoint =3D <&fimd_dpi_ep>; >> + }; >> + }; >> + }; >> + }; >> + >> + fixed-rate-clocks { >> + xxti { >> + compatible =3D "samsung,clock-xxti"; >> + clock-frequency =3D <0>; >> + }; >> + >> + xusbxti { >> + compatible =3D "samsung,clock-xusbxti"; >> + clock-frequency =3D <24000000>; >> + }; >> + }; >> + >> + thermal-zones { >> + cpu_thermal: cpu-thermal { >> + cooling-maps { >> + map0 { >> + /* Corresponds to 800MHz */ >> + cooling-device =3D <&cpu0 2 2>; >> + }; >> + map1 { >> + /* Corresponds to 200MHz */ >> + cooling-device =3D <&cpu0 4 4>; >> + }; >> + }; >> + }; >> + }; >> + >> +}; >> + >> +&camera { >> + status =3D "okay"; >> +}; >> + >> +&cpu0 { >> + cpu0-supply =3D <&varm_breg>; >> +}; >> + >> +&exynos_usbphy { >> + status =3D "okay"; >> + >> + vbus-supply =3D <&safe1_sreg>; >> +}; >> + >> +&fimc_0 { >> + status =3D "okay"; >> + >> + assigned-clocks =3D <&clock CLK_MOUT_FIMC0>, <&clock = >> CLK_SCLK_FIMC0>; >> + assigned-clock-parents =3D <&clock CLK_SCLK_MPLL>; >> + assigned-clock-rates =3D <0>, <160000000>; >> +}; >> + >> +&fimc_1 { >> + status =3D "okay"; >> + >> + assigned-clocks =3D <&clock CLK_MOUT_FIMC1>, <&clock = >> CLK_SCLK_FIMC1>; >> + assigned-clock-parents =3D <&clock CLK_SCLK_MPLL>; >> + assigned-clock-rates =3D <0>, <160000000>; >> +}; >> + >> +&fimc_2 { >> + status =3D "okay"; >> + >> + assigned-clocks =3D <&clock CLK_MOUT_FIMC2>, <&clock = >> CLK_SCLK_FIMC2>; >> + assigned-clock-parents =3D <&clock CLK_SCLK_MPLL>; >> + assigned-clock-rates =3D <0>, <160000000>; >> +}; >> + >> +&fimc_3 { >> + status =3D "okay"; >> + >> + assigned-clocks =3D <&clock CLK_MOUT_FIMC3>, <&clock = >> CLK_SCLK_FIMC3>; >> + assigned-clock-parents =3D <&clock CLK_SCLK_MPLL>; >> + assigned-clock-rates =3D <0>, <160000000>; >> +}; >> + >> +&fimd { >> + status =3D "okay"; >> + #address-cells =3D <1>; >> + #size-cells =3D <0>; >> + >> + samsung,invert-vden; >> + samsung,invert-vclk; >> + >> + pinctrl-0 =3D <&lcd_clk>, <&lcd_data24>; >> + pinctrl-names =3D "default"; >> + >> + port@3 { >> + reg =3D <3>; >> + >> + fimd_dpi_ep: endpoint { >> + remote-endpoint =3D <&lcd_ep>; >> + }; >> + }; >> +}; >> + >> +&hsotg { >> + status =3D "okay"; >> + >> + dr_mode =3D "otg"; >> + vusb_d-supply =3D <&vusb_reg>; >> + vusb_a-supply =3D <&vusbdac_reg>; >> +}; >> + >> +&ehci { > = > Order the phandle/nodes in alphabetical order, please. So: > = > &ehci ... > &hsoth ... > &i2c ... > = > etc. > = >> + status =3D "okay"; >> + >> + port@0 { >> + status =3D "okay"; >> + }; >> + >> + port@1 { >> + status =3D "okay"; >> + }; >> + >> + port@2 { >> + status =3D "okay"; >> + }; >> +}; >> + > = > Double empty line. > = >> + >> +&i2c_3 { >> + status =3D "okay"; >> + >> + samsung,i2c-sda-delay =3D <100>; >> + samsung,i2c-slave-addr =3D <0x10>; >> + samsung,i2c-max-bus-freq =3D <100000>; >> + >> + pinctrl-0 =3D <&i2c3_bus>; >> + pinctrl-names =3D "default"; >> + >> + mxt224-touchscreen@4a { >> + compatible =3D "atmel,maxtouch"; >> + reg =3D <0x4a>; >> + >> + interrupt-parent =3D <&gpx0>; >> + interrupts =3D <4 IRQ_TYPE_EDGE_FALLING>; >> + >> + avdd-supply =3D <&tsp_reg>; >> + vdd-supply =3D <&tsp_reg>; >> + }; >> +}; >> + >> +&i2c_7 { >> + status =3D "okay"; >> + >> + samsung,i2c-sda-delay =3D <100>; >> + samsung,i2c-slave-addr =3D <0x10>; >> + samsung,i2c-max-bus-freq =3D <400000>; >> + >> + pinctrl-0 =3D <&i2c7_bus>; >> + pinctrl-names =3D "default"; >> + >> + ak8975@c { >> + compatible =3D "asahi-kasei,ak8975"; >> + reg =3D <0x0c>; >> + >> + gpios =3D <&gpx2 2 GPIO_ACTIVE_HIGH>; >> + }; >> +}; >> + >> + >> +&i2c_5 { >> + status =3D "okay"; >> + >> + samsung,i2c-sda-delay =3D <100>; >> + samsung,i2c-slave-addr =3D <0x10>; >> + samsung,i2c-max-bus-freq =3D <100000>; >> + >> + pinctrl-0 =3D <&i2c5_bus>; >> + pinctrl-names =3D "default"; >> + >> + max8997_pmic@66 { >> + compatible =3D "maxim,max8997-pmic"; >> + reg =3D <0x66>; >> + >> + interrupts-extended =3D <&gpx0 7 0>, <&gpx2 3 2>; >> + interrupt-parent =3D <&gpx0>; >> + interrupts =3D <7 IRQ_TYPE_NONE>; >> + >> + otg_en-gpios =3D <&gpx3 3 0>; >> + usb_sel-gpios =3D <&gpl0 6 0>; >> + >> + max8997,pmic-buck1-uses-gpio-dvs; >> + max8997,pmic-buck2-uses-gpio-dvs; >> + max8997,pmic-buck5-uses-gpio-dvs; >> + >> + max8997,pmic-ignore-gpiodvs-side-effect; >> + max8997,pmic-buck125-default-dvs-idx =3D <0>; >> + >> + max8997,pmic-buck125-dvs-gpios =3D <&gpx0 5 GPIO_ACTIVE_HIGH>, >> + <&gpx0 6 GPIO_ACTIVE_HIGH>, >> + <&gpl0 0 GPIO_ACTIVE_HIGH>; >> + >> + max8997,pmic-buck1-dvs-voltage =3D <1350000>, <1300000>, >> + <1250000>, <1200000>, >> + <1150000>, <1100000>, >> + <1000000>, <950000>; >> + >> + max8997,pmic-buck2-dvs-voltage =3D <1100000>, <1000000>, >> + <950000>, <900000>, >> + <1100000>, <1000000>, >> + <950000>, <900000>; >> + >> + max8997,pmic-buck5-dvs-voltage =3D <1200000>, <1200000>, >> + <1200000>, <1200000>, >> + <1200000>, <1200000>, >> + <1200000>, <1200000>; >> + >> + pinctrl-0 =3D <&max8997_irq>, <&otg_gp>, <&usb_sel>; >> + pinctrl-names =3D "default"; >> + >> + regulators { >> + vadc_reg: LDO1 { >> + regulator-name =3D "VADC_3.3V_C210"; >> + regulator-min-microvolt =3D <3300000>; >> + regulator-max-microvolt =3D <3300000>; >> + regulator-always-on; >> + >> + }; > = > Add empty line. > = >> + valive_reg: LDO2 { >> + regulator-name =3D "VALIVE_1.1V_C210"; >> + regulator-min-microvolt =3D <1100000>; >> + regulator-max-microvolt =3D <1100000>; >> + regulator-always-on; >> + >> + }; >> + >> + vusb_reg: LDO3 { >> + regulator-name =3D "VUSB_1.1V_C210"; >> + regulator-min-microvolt =3D <1100000>; >> + regulator-max-microvolt =3D <1100000>; >> + }; >> + >> + vmipi_reg: LDO4 { >> + regulator-name =3D "VMIPI_1.8V"; >> + regulator-min-microvolt =3D <1800000>; >> + regulator-max-microvolt =3D <1800000>; >> + regulator-always-on; >> + }; >> + >> + vhsic_reg: LDO5 { >> + regulator-name =3D "VHSIC_1.2V"; >> + regulator-min-microvolt =3D <1200000>; >> + regulator-max-microvolt =3D <1200000>; >> + regulator-always-on; >> + }; >> + >> + vpda_reg: LDO6 { >> + regulator-name =3D "VCC_1.8V_PDA"; >> + regulator-min-microvolt =3D <1800000>; >> + regulator-max-microvolt =3D <1800000>; >> + regulator-always-on; >> + }; >> + >> + vcam_reg: LDO7 { >> + regulator-name =3D "CAM_ISP_1.8V"; >> + regulator-min-microvolt =3D <1800000>; >> + regulator-max-microvolt =3D <1800000>; >> + }; >> + >> + vusbdac_reg: LDO8 { >> + regulator-name =3D "VUSB+VDAC_3.3V_C210"; >> + regulator-min-microvolt =3D <3300000>; >> + regulator-max-microvolt =3D <3300000>; >> + }; >> + >> + vccpda_reg: LDO9 { >> + regulator-name =3D "VCC_2.8V_PDA"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + regulator-always-on; >> + }; >> + >> + vtouch_reg: LDO11 { >> + regulator-name =3D "TOUCH_2.8V"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + regulator-always-on; >> + }; >> + >> + vpll_reg: LDO10 { >> + regulator-name =3D "VPLL_1.1V"; >> + regulator-min-microvolt =3D <1100000>; >> + regulator-max-microvolt =3D <1100000>; >> + regulator-always-on; >> + }; >> + >> + vtcam_reg: LDO12 { >> + regulator-name =3D "VT_CAM_1.8V"; >> + regulator-min-microvolt =3D <1800000>; >> + regulator-max-microvolt =3D <1800000>; >> + }; >> + >> + vcclcd_reg: LDO13 { >> + regulator-name =3D "VCC_3.0V_LCD"; >> + regulator-min-microvolt =3D <3000000>; >> + regulator-max-microvolt =3D <3000000>; >> + }; >> + >> + vmotor_reg: LDO14 { >> + regulator-name =3D "VCC_2.8V_MOTOR"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + }; >> + >> + vled_reg: LDO15 { >> + regulator-name =3D "LED_A_2.8V"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + }; >> + >> + camsensor_reg: LDO16 { >> + regulator-name =3D "CAM_SENSOR_IO_1.8V"; >> + regulator-min-microvolt =3D <1800000>; >> + regulator-max-microvolt =3D <1800000>; >> + }; >> + >> + vtf_reg: LDO17 { >> + regulator-name =3D "VTF_2.8V"; >> + regulator-min-microvolt =3D <2800000>; >> + regulator-max-microvolt =3D <2800000>; >> + }; >> + >> + vtouchled_reg: LDO18 { >> + regulator-name =3D "TOUCH_LED_3.3V"; >> + regulator-min-microvolt =3D <2500000>; >> + regulator-max-microvolt =3D <3300000>; >> + }; >> + >> + vddq_reg: LDO21 { >> + regulator-name =3D "VDDQ_M1M2_1.2V"; >> + regulator-min-microvolt =3D <1200000>; >> + regulator-max-microvolt =3D <1200000>; >> + regulator-always-on; >> + }; >> + >> + varm_breg: BUCK1 { >> + //regulator-name =3D "VARM_1.2V_C210"; >> + regulator-name =3D "vdd_arm"; >> + regulator-min-microvolt =3D <65000>; >> + regulator-max-microvolt =3D <2225000>; >> + regulator-always-on; >> + }; >> + >> + vint_breg: BUCK2 { >> + regulator-name =3D "VINT_1.1V_C210"; >> + regulator-min-microvolt =3D <65000>; >> + regulator-max-microvolt =3D <2225000>; >> + regulator-always-on; >> + }; >> + >> + vg3d_breg: BUCK3 { >> + regulator-name =3D "G3D_1.1V"; >> + regulator-min-microvolt =3D <900000>; >> + regulator-max-microvolt =3D <1200000>; >> + regulator-always-on; >> + }; >> + >> + camisp_breg: BUCK4 { >> + regulator-name =3D "CAM_ISP_CORE_1.2V"; >> + regulator-min-microvolt =3D <1200000>; >> + regulator-max-microvolt =3D <1200000>; >> + }; >> + >> + vmem_breg: BUCK5 { >> + regulator-name =3D "VMEM_1.2V"; >> + regulator-min-microvolt =3D <1200000>; >> + regulator-max-microvolt =3D <1200000>; >> + regulator-always-on; >> + }; >> + >> + vccsub_breg: BUCK7 { >> + regulator-name =3D "VCC_SUB_2.0V"; >> + regulator-min-microvolt =3D <2000000>; >> + regulator-max-microvolt =3D <2000000>; >> + regulator-always-on; >> + }; >> + >> + safe1_sreg: ESAFEOUT1 { >> + regulator-name =3D "SAFEOUT1"; >> + }; >> + >> + safe2_sreg: ESAFEOUT2 { >> + regulator-name =3D "SAFEOUT2"; >> + regulator-boot-on; >> + }; >> + >> + charger_reg: CHARGER { >> + regulator-name =3D "CHARGER"; >> + regulator-min-microamp =3D <60000>; >> + regulator-max-microamp =3D <2580000>; >> + regulator-always-on; >> + }; >> + >> + chargercv_reg: CHARGER_CV { >> + regulator-name =3D "CHARGER_CV"; >> + regulator-min-microvolt =3D <3800000>; >> + regulator-max-microvolt =3D <4100000>; >> + regulator-always-on; >> + }; >> + > = > Empty line, not needed. > = >> + }; >> + > = > Empty line, not needed. > = >> + }; >> +}; >> + >> + > = > Empty line, not needed. Please fix them in all places. > = >> +&gpu { >> + status =3D "okay"; >> + >> + mali-supply =3D <&vg3d_breg>; >> + regulator-microvolt-offset =3D <50000>; >> + regulator-microsecs-delay =3D <50>; >> +}; >> + > = > and more... > = >> + >> +&sdhci_0 { >> + status =3D "okay"; >> + >> + bus-width =3D <8>; >> + non-removable; >> + vmmc-supply =3D <&vemmc_reg>; >> + >> + pinctrl-0 =3D <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; >> + pinctrl-names =3D "default"; >> +}; >> + >> +&sdhci_2 { >> + status =3D "okay"; >> + >> + bus-width =3D <4>; >> + cd-gpios =3D <&gpx3 4 GPIO_ACTIVE_LOW>; >> + vmmc-supply =3D <&vtf_reg>; >> + >> + pinctrl-0 =3D <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; >> + pinctrl-names =3D "default"; >> +}; >> + >> +&ehci { > = > Duplicated. > = > Best regards, > Krzysztof > = _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel