[PATCH net-next 3/3] net: dpaa2-mac: add backplane link mode support

[Russell King <rmk+kernel@armlinux.org.uk>]

Add support for backplane link mode, which is, according to discussions
with NXP earlier in the year, is a mode where the OS (Linux) is able to
manage the PCS and Serdes itself.

This commit prepares the ground work for allowing 1G fiber connections
to be used with DPAA2 on the SolidRun CEX7 platforms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 3ddfb40eb5e4..ccaf7e35abeb 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -315,8 +315,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		goto err_put_node;
 	}
 
-	if (mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
-	    mac->attr.eth_if != DPMAC_ETH_IF_RGMII) {
+	if ((mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
+	     mac->attr.eth_if != DPMAC_ETH_IF_RGMII) ||
+	    mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE) {
 		err = dpaa2_pcs_create(mac, dpmac_node, mac->attr.id);
 		if (err)
 			goto err_put_node;
-- 
2.20.1