From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Mats_K=E4rrman?= Date: Wed, 23 Jan 2013 13:17:51 +0000 Subject: [U-Boot] mpc512x: Trouble migrating from 2012.07 to 2013.01 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi! I have a system using a MPC5125 processor working fine using U-Boot 2012.07. I have based my board adaption etc on the mpc5121ads board and also patched the necessary parts of the serial port driver. Now when I'm trying to migrate to U-Boot 2013.01 I face problems with a sudden hang. I see console output until the "Flash:" from arch/powerpc/lib/board.c::board_init_r() but nothing more until the board reboots on a watchdog reset after 30s. I have looked for relevant changes in the U-Boot code and tried some printf debugging. So far I have been unable to pin down exactly where things go wrong. Question: To help me decide where to look I would like to know if anyone has built the mpc5121ads board configuration using U-Boot 2013.01 and actually tested that it is still working? Thanks & best regards, Mats