From: Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: Patrick CARNEIRO RODRIGUEZ <p.carneiro@actiasodielec.fr>,
Kalle Valo <kvalo@qca.qualcomm.com>,
"ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: RE : RE : RE : Report Firmware firmware-2.bin_10.1.467.2-1 Error
Date: Wed, 30 Apr 2014 14:39:44 +0200 [thread overview]
Message-ID: <EE97821C81277E459BEA5C6384C6F241012F0EFBBCB2@srvexch01.SODIELEC.local> (raw)
In-Reply-To: <CA+BoTQkChYC+sTy4MSFCbGDvNoGHRko=Oxbkj=hVy+EQ4LP1Gg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 10216 bytes --]
>> It seems that the command arrives until the level of driver ath10k and works but when I verified by connecting a station to my access point and look at the out put of "iw wlan0 station dump", the value of txpower received at the >>station didn't change even when I changed the txpower of my access point from 1dBm to 20dBm (my station is near the access point).
>This works for me (latest github.com/kvalo/ath/master with 467.2).
>I can see "signal" values change in iw station dump on the connected
>client when I set different txpower values on ath10k AP.
I replace the ath from backports with the one from master tree of ath, but it is worse.
When I set a channel from 52 (or higher) for AP mode using the version of backports, I get a backtrace message output and then my wlan0 become ready:
br0: port 2(wlan0) entering disabled state
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: interface------------[ cut here ]------------
state UNINITIALWARNING: at /home/alberix2/Desktop/Wilinks_ath10k/ACCESS_POINT_A
PPLI/Source/Driver_ath10k/backports-3.15-rc1-1/net/wireless/nl80211.c:5824 nl802
11_start_radar_detection+0xf8/0x16c [cfg80211]()
IZED->COUNTRY_UPModules linked in:DATE
wlan0: int ath10k_pci(O)erface state COU ath10k_core(O)NTRY_UPDATE->DFS ath(O)
wlan0: DFS-CAC mac80211(O)-START freq=5260 cfg80211(O) chan=52 sec_cha compat(O)
n=0
arc4 ubifs ubi [last unloaded: compat]
Backtrace:
[<c0011938>] (dump_backtrace+0x0/0x118) from [<c050205c>] (dump_stack+0x18/0x20)
r6:bf49a62b r5:000016c0 r4:00000000 r3:c10b27ac
[<c0502044>] (dump_stack+0x0/0x20) from [<c0066c38>] (warn_slowpath_common+0x54/
0x70)
[<c0066be4>] (warn_slowpath_common+0x0/0x70) from [<c0066c78>] (warn_slowpath_nu
ll+0x24/0x2c)
r8:00000000 r7:00000000 r6:d2f9f000 r5:d2aa0000 r4:d2f9f3c8
r3:00000009
[<c0066c54>] (warn_slowpath_null+0x0/0x2c) from [<bf45eae8>] (nl80211_start_rada
r_detection+0xf8/0x16c [cfg80211])
[<bf45e9f0>] (nl80211_start_radar_detection+0x0/0x16c [cfg80211]) from [<c045348
8>] (genl_rcv_msg+0x1b4/0x1f4)
[<c04532d4>] (genl_rcv_msg+0x0/0x1f4) from [<c0452904>] (netlink_rcv_skb+0x58/0x
b8)
[<c04528ac>] (netlink_rcv_skb+0x0/0xb8) from [<c04532c4>] (genl_rcv+0x20/0x30)
r6:c082f600 r5:d2a7d0e0 r4:d2a7d0e0 r3:c04532a4
[<c04532a4>] (genl_rcv+0x0/0x30) from [<c04522d0>] (netlink_unicast+0x224/0x2c4)
r4:d0074400 r3:c04532a4
[<c04520ac>] (netlink_unicast+0x0/0x2c4) from [<c04526a4>] (netlink_sendmsg+0x29
0/0x320)
[<c0452414>] (netlink_sendmsg+0x0/0x320) from [<c0428eac>] (sock_sendmsg+0x98/0x
b4)
[<c0428e14>] (sock_sendmsg+0x0/0xb4) from [<c0429150>] (__sys_sendmsg+0x1d0/0x26
c)
r4:d281bf64
[<c0428f80>] (__sys_sendmsg+0x0/0x26c) from [<c042ab30>] (sys_sendmsg+0x44/0x68)
[<c042aaec>] (sys_sendmsg+0x0/0x68) from [<c000ddc0>] (ret_fast_syscall+0x0/0x30
)
r6:0012d850 r5:0012d888 r4:400c8900
---[ end trace c03fd18534c1267a ]---
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
br0: port 2(wlan0) entering forwarding state
br0: port 2(wlan0) entering forwarding state
But with the version from ath master tree, I always get wlan0: link is not ready (and there is no backtrace msg).
And in both versions, the firmware usually crashed when I set a channel lower than 52 (I don't get backtrace msg in these cases):
wlan0: AP-ENABLED
ath10k: firmware crashed!
ath10k: hardware name qca988x hw2.0 version 0x4100016c
ath10k: firmware version: 10.1.467.2-1
ath10k: target register Dump Location: 0x0040AAA4
ath10k: target Register Dump
ath10k: [00]: 0x4100016C 0x000015B3 0x0099F306 0x00955B31
ath10k: [04]: 0x0099F306 0x00060530 0x00000005 0x00000000
ath10k: [08]: 0x009B8164 0x004118C4 0x0043DD84 0x00400000
ath10k: [12]: 0x00000009 0xFFFFFFFF 0x0095808C 0x009580A2
ath10k: [16]: 0x00958080 0x0094085D 0x00000000 0x00000000
ath10k: [20]: 0x4099F306 0x0040ABB4 0x00955A00 0x00000003
ath10k: [24]: 0x809995A1 0x0040AC14 0x0040ACB4 0xC099F306
ath10k: [28]: 0x80999400 0x0040AC44 0x004343F0 0x0040ACCC
ath10k: [32]: 0x8098CE0E 0x0040AC64 0x004343F0 0x0040ACCC
ath10k: [36]: 0x809912AC 0x0040AC84 0x004343F0 0x0040ACCC
ath10k: [40]: 0x8099147A 0x0040ACA4 0x0041ED48 0x00434488
ath10k: [44]: 0x80991661 0x0040AD24 0x00000000 0x0042F2A0
ath10k: [48]: 0x8099081C 0x0040AD84 0x00434488 0x0042F1CC
ath10k: [52]: 0x809909D0 0x0040ADA4 0x00000000 0x0042D704
ath10k: [56]: 0x809968F1 0x0040AEC4 0x0041ED48 0x00000000
ath10k: suspend timed out - target pause event never came
ieee80211 phy0: Hardware restart was requested
ath10k: device successfully recovered
There is an ouput of my dmesg in the attached file if someone is interested in :D
One more question: The default country for regulatory domain of ath is US?
I found that it was defined in file "regd.c" and that's why even I set my country to FR ("iw reg set FR") I was not able to set up the channel 12 and 13. (Marked as disabled in output of "iw list" so I replace CTRY_UNITED_STATES with CTRY_FRANCE and then I can get the channel 12 and 13 worked. Is this legal?
@ Chun-Yeow:
>For TxRate, another option would be looking at
>"/sys/kernel/debug/ieee80211/phy0/ath10k/fw_stats".
When I "cat" that file there is nothing appear (it looks like empty) (But I can view other information from others files, such as: simulate_fw_crash, fw_dbglog, htt_stats_mask, wmi_services). Do you have any idea? :D
Thank you all of you for your support
NGUYEN Vu Hai
Acita-Sodielec
Route de Mayres - B.P. 9
12100 St GEORGES DE LUZENCON
FRANCE
________________________________________
De : Michal Kazior [michal.kazior@tieto.com]
Date d'envoi : jeudi 24 avril 2014 11:41
À : Vu Hai NGUYEN
Cc : Kalle Valo; Patrick CARNEIRO RODRIGUEZ; ath10k@lists.infradead.org
Objet : Re: RE : RE : Report Firmware firmware-2.bin_10.1.467.2-1 Error
On 24 April 2014 11:03, Vu Hai NGUYEN <vh.nguyen@actiasodielec.fr> wrote:
> Thank you for your response, the problem is solved when I download the latest version of backport (3.15) and compile ath10k with it (last time my version is 3.13 and as you said, It might not include the patch).
> Now I can load the firmware 10.1.467.2-1 but I get new problem too.
> Does ath10k support all the command of "iw"?
> For example I set up mode access point and tried to change the txpower by the command: "iw wlan0 set txpower fixed 1200" (same thing as "iwconfig wlan0 txpower 12dBm" , right?)
> The output of "iwconfig" is:
> wlan0 IEEE 802.11abgn Mode:Master Tx-Power=12 dBm
> Retry short limit:7 RTS thr:off Fragment thr:off
> Power Management:on
>
> And output of "dmesg":
> ath10k: mac config power 12
> ath10k: wmi pdev set param 3 value 24
> ath10k: wmi pdev set param 4 value 24
>
> It seems that the command arrives until the level of driver ath10k and works but when I verified by connecting a station to my access point and look at the out put of "iw wlan0 station dump", the value of txpower received at the station didn't change even when I changed the txpower of my access point from 1dBm to 20dBm (my station is near the access point).
This works for me (latest github.com/kvalo/ath/master with 467.2).
I can see "signal" values change in iw station dump on the connected
client when I set different txpower values on ath10k AP.
> Same thing when I do with the command set bit rates: "iw wlan0 set bitrates legacy-2.4 54 ht-mcs-2.4"
>
> Out put of dmesg:
> ath10k: mac fixed rate pream 0x00 nss 0x00 rate 0x04
> ath10k: wmi vdev id 0x0 set param 27 value 4
> ath10k: wmi vdev id 0x0 set param 34 value 1
> ath10k: wmi vdev id 0x0 set param 28 value 0
> ath10k: wmi event debug mesg len 16
>
> But the out put of " iw wlan0 station dump" did not show any change when I varied the bit rate of my access point too.
Again, this works for me.
To be clear - ath10k is incapable of reporting "tx bitrate" (it always
reports 6mbps). If you want to verify if the bitrate mask works you
must check "rx bitrate" on the other side, i.e. on the connected
client.
Or just use a separate sniffer and see if AP is sends frames with
different txpower/bitrate values.
Michał
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 127056 bytes --]
Linux version 3.2.36 (alberix2@nguyen-actiasodielec) (gcc version 4.6.2 (Linaro
GCC branch-4.6.2. Marvell GCC 201201-883.01c949de) ) #157 Wed Apr 30 12:47:13 CE
ST 2014
CPU: Marvell PJ4Bv7 Processor [561f5811] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: Marvell Armada-370
Using UBoot passing parameters structure
>>>>>>>Tag MAC 00:00:00:00:00:00
>>>>>>>Tag MAC 86:48:25:43:50:00
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c111a7bc, node_mem_map c1184000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048
Kernel command line: console=ttyS0,115200 panic=1 modeboot=2 vboot=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 497716k/497716k available, 26572k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xfa800000 ( 416 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0772000 (7592 kB)
.init : 0xc0772000 - 0xc10a8000 (9432 kB)
.data : 0xc10a8000 - 0xc1127f38 ( 512 kB)
.bss : 0xc1127f5c - 0xc11837ac ( 367 kB)
NR_IRQS:256
a370_time_init
sched_clock: 32 bits at 600MHz, resolution 1ns, wraps every 7158ms
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: no hardware support available
devtmpfs: initialized
xor: measuring software checksum speed
arm4regs : 1150.400 MB/sec
8regs : 814.000 MB/sec
32regs : 1145.200 MB/sec
xor: using function: arm4regs (1150.400 MB/sec)
NET: Registered protocol family 16
L0 cache Enabled
Speculative Prefetch Disabled
Aurora L2 Cache Enabled
Support IO coherency.
Enable DLB and DRAM write coalescing
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 512MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
DEVICE_CS0 ....base f2000000, size 32MB
DEVICE_CS1 ....no such
DEVICE_CS2 ....no such
DEVICE_CS3 ....no such
PEX0_MEM ....base e0000000, size 32MB
PEX0_IO ....base f1100000, size 1MB
PEX1_MEM ....base e2000000, size 32MB
PEX1_IO ....base f1200000, size 1MB
INTER_REGS ....base d0000000, size 1MB
DMA_UART ....no such
SPI_CS0 ....base f0000000, size 16MB
SPI_CS1 ....no such
SPI_CS2 ....no such
SPI_CS3 ....no such
SPI_CS4 ....no such
SPI_CS5 ....no such
SPI_CS6 ....no such
SPI_CS7 ....no such
BOOT_ROM_CS ....no such
DEV_BOOTCS ....base f5000000, size 16MB
PMU_SCRATCHPAD ....no such
CRYPT0_ENG ....base c8010000, size 64KB
Marvell Armada370 Board-- RD-88F6710 Soc: MV6710 A1 LE
LSP version: linux-3.2.y-2013_Q1.0p2
Detected Tclk 200000000, SysClk 600000000, FabricClk 600000000
Marvell USB EHCI Host controller #0: d004d600
Marvell USB EHCI Host controller #1: d004d400
pci 0000:00:00.0: [168c:003c] type 0 class 0x000280
pci 0000:00:00.0: reg 10: [mem 0x40000000-0x401fffff 64bit]
pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:00.0: PME# disabled
PCI: bus0: Fast back to back transfers disabled
PCI: bus1: Fast back to back transfers enabled
pci 0000:00:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit]
pci 0000:00:00.0: BAR 0: set to [mem 0xe0000000-0xe01fffff 64bit] (PCI address [
0xe0000000-0xe01fffff])
pci 0000:00:00.0: BAR 6: assigned [mem 0xe0200000-0xe020ffff pref]
bio: create slab <bio-0> at 0
raid6: int32x1 135 MB/s
raid6: int32x2 210 MB/s
raid6: int32x4 202 MB/s
raid6: int32x8 232 MB/s
raid6: using algorithm int32x8 (232 MB/s)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
Switching to clocksource armada370_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 32 bytes, default 32
cesadev_init(c077a004)
mvCesaInit: channels=1, session=640, queue=64
Armada XP hwmon thermal sensor initialized.
Initializing Armada-XP CPU power management (WFI)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 972
async_tx: api initialized (async)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Initializing ths8200_init
Initializing dove_adi9889_init
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor )
mv_xor mv_xor.1: Marvell XOR: ( xor )
mv_xor mv_xor.2: Marvell XOR: ( cpy )
mv_xor mv_xor.3: Marvell XOR: ( fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xd0012000 (irq = 41) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
lkdtm: No crash points registered, enable through debugfs
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 55
ata2: SATA max UDMA/133 irq 55
mvSFlashInit ERROR: Unknown SPI flash device!
ERROR: sflash_probe - Failed to initialize the SFlash.
armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabl
ed using BCH 4bit ECC
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron NAND 1GiB 3,3V 8-bit)
Bad block table found at page 262016, version 0x01
Bad block table found at page 261888, version 0x01
Creating 7 MTD partitions on "armada-nand":
0x000000000000-0x000000400000 : "uboot"
0x000000400000-0x000000800000 : "uboot-env"
0x000000800000-0x000004800000 : "App1"
0x000004800000-0x000008800000 : "App2"
0x000008800000-0x00000c800000 : "nand-config"
0x00000c800000-0x000010800000 : "nand-jdb"
0x000010800000-0x000040000000 : "User"
mv_eth_probe: port_mask=0x2, cpu_mask=0x1
0 - Base 0x00000000 , Size = 0x00000000.
4 - Base 0xf2000000 , Size = 0x00000000.
8 - Base 0xe0000000 , Size = 0x00000000.
9 - Base 0xf1100000 , Size = 0x00000000.
10 - Base 0xe2000000 , Size = 0x00000000.
11 - Base 0xf1200000 , Size = 0x00000000.
12 - Base 0xd0000000 , Size = 0x00000000.
14 - Base 0xf0000000 , Size = 0x00000000.
23 - Base 0xf5000000 , Size = 0x00000000.
25 - Base 0xc8010000 , Size = 0x00000000.
o 2 Giga ports supported
o SKB recycle supported (Enabled)
o NETA acceleration mode 1
o RX Queue support: 8 Queues * 128 Descriptors
o TX Queue support: 8 Queues * 532 Descriptors
o GSO supported
o GRO supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Driver ERROR statistics enabled
o Switch support enabled
o Loading Switch QuarterDeck driver
o Device ID : 0x176
o No. of Ports : 7
o CPU Port : 5
o Disable disconnected Switch Port #4 and force link down
o Setting Switch Port #5 connected to GMAC port for 1000 Full with FC
o Disable disconnected Switch Port #6 and force link down
o Loading network interface(s)
o Port 1 is connected to Linux netdevice
o Using default netconfig string from Kconfig for port 1
net_config_str[1]: 0
o Working in External Switch mode
Port 1: Link-up, Full-duplex, Speed-100Mbps.
giga p=1: mtu=1500, mac=d002be64
o eth0, ifindex = 2, GbE port = 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
sky2: driver version 1.30
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.0: Marvell Orion EHCI
ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100
ata1: SATA link down (SStatus 0 SControl F300)
ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_marvell ehci_marvell.1: Marvell Orion EHCI
ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2
ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100
ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mousedev: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
Linux telephony interface: v1.00
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
cpuidle: using governor menu
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1: new high-speed USB device number 2 using ehci_marvell
ata2: SATA link down (SStatus 0 SControl F300)
cs42l51-codec 0-004a: failed to read I2C
ALSA device list:
No soundcards found.
oprofile: no performance counters
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
8021q: 802.1Q VLAN Support v1.8
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
rtc-mv rtc-mv: setting system clock to 2014-04-28 16:02:19 UTC (1398700939)
Freeing init memory: 9432K
UBI: attaching mtd4 to ubi0
UBI DBG (pid 670): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
UBI DBG (pid 670): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
UBI DBG (pid 670): io_init: min_io_size 4096
UBI DBG (pid 670): io_init: max_write_size 4096
UBI DBG (pid 670): io_init: hdrs_min_io_size 4096
UBI DBG (pid 670): io_init: ec_hdr_alsize 4096
UBI DBG (pid 670): io_init: vid_hdr_alsize 4096
UBI DBG (pid 670): io_init: vid_hdr_offset 4096
UBI DBG (pid 670): io_init: vid_hdr_aloffset 4096
UBI DBG (pid 670): io_init: vid_hdr_shift 0
UBI DBG (pid 670): io_init: leb_start 8192
UBI DBG (pid 670): io_init: max_erroneous 16
UBI: physical eraseblock size: 524288 bytes (512 KiB)
UBI: logical eraseblock size: 516096 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI DBG (pid 670): ubi_scan: scanning is finished
UBI: max. sequence number: 675
UBI: attached mtd4 to ubi0
UBI: MTD device name: "nand-config"
UBI: MTD device size: 64 MiB
UBI: number of good PEBs: 128
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 105
UBI: total number of reserved PEBs: 23
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 6/5
UBI: image sequence number: 590045203
UBI: background thread "ubi_bgt0d" started, PID 673
UBI: attaching mtd5 to ubi1
UBI DBG (pid 674): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
UBI DBG (pid 674): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
UBI DBG (pid 674): io_init: min_io_size 4096
UBI DBG (pid 674): io_init: max_write_size 4096
UBI DBG (pid 674): io_init: hdrs_min_io_size 4096
UBI DBG (pid 674): io_init: ec_hdr_alsize 4096
UBI DBG (pid 674): io_init: vid_hdr_alsize 4096
UBI DBG (pid 674): io_init: vid_hdr_offset 4096
UBI DBG (pid 674): io_init: vid_hdr_aloffset 4096
UBI DBG (pid 674): io_init: vid_hdr_shift 0
UBI DBG (pid 674): io_init: leb_start 8192
UBI DBG (pid 674): io_init: max_erroneous 16
UBI: physical eraseblock size: 524288 bytes (512 KiB)
UBI: logical eraseblock size: 516096 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI DBG (pid 674): ubi_scan: scanning is finished
UBI: max. sequence number: 715
UBI: attached mtd5 to ubi1
UBI: MTD device name: "nand-jdb"
UBI: MTD device size: 64 MiB
UBI: number of good PEBs: 128
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 105
UBI: total number of reserved PEBs: 23
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 7/5
UBI: image sequence number: 1893155953
UBI: background thread "ubi_bgt1d" started, PID 677
UBI error: ubi_create_volume: volume "config" exists (ID 0)
UBI error: ubi_create_volume: cannot create volume 1, error -17
UBI error: ubi_create_volume: volume "jdb" exists (ID 0)
UBI error: ubi_create_volume: cannot create volume 1, error -17
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "config"
UBIFS: file system size: 4644864 bytes (4536 KiB, 4 MiB, 9 LEBs)
UBIFS: journal size: 3612673 bytes (3528 KiB, 3 MiB, 5 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 219388 bytes (214 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "jdb"
UBIFS: file system size: 4644864 bytes (4536 KiB, 4 MiB, 9 LEBs)
UBIFS: journal size: 3612673 bytes (3528 KiB, 3 MiB, 5 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 219388 bytes (214 KiB)
pool #1: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
Port 0: Link-down
eth0: link up
Port 1: Link-up, Full-duplex, Speed-100Mbps.
Port 2: Link-down
Port 3: Link-down
Port -1: Link-down
eth0: started
Loading modules backported from Linux version v3.15-rc1-0-gc9eaa44
Backport generated by backports.git v3.15-rc1-1-0-g2a25483
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (
dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ath10k: device supports MSI-X
ath10k_pci 0000:00:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit]
ath10k_pci 0000:00:00.0: BAR 0: set to [mem 0xe0000000-0xe01fffff 64bit] (PCI ad
dress [0xe0000000-0xe01fffff])
ath10k: boot pci_mem 0xe2400000
ath10k: boot chip_id 0x043202ff hw_revision 0x2
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr d26ca000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2858000
ath10k: boot ce dest ring id 2 entries 32 base_addr d26c7000
ath10k: boot ce src ring id 3 entries 32 base_addr d268d000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2920000
ath10k: boot ce src ring id 7 entries 2 base_addr d292f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d292e000
ath10k: pci irq legacy
ath10k: bmi get target info
ath10k: Hardware name qca988x hw2.0 version 0x4100016c
ath10k: found fw version 10.1.467.2-1
ath10k: found fw timestamp 1391440175
ath10k: found otp image ie (6917 B)
ath10k: found fw image ie (190250 B)
ath10k: found firmware features ie (1 B)
ath10k: Enabling feature bit: 1
ath10k: Enabling feature bit: 2
ath10k: features
00000000: 06 00 00 00 ....
ath10k: using fw api 2
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd2751cbc length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd2751cbc length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12de0000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: qca988x hw2.0 (0x4100016c) fw 10.1.467.2-1 api 2 htt 2.1
ath10k: boot suspend complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: FR
ath: Regpair used: 0x37
Debug PCR pour etre sur qu'on passe bien ici
cfg80211: Calling CRDA for country: FR
cfg80211: Regulatory domain changed to country: FR
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (
dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr c09ae000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2d3a000
ath10k: boot ce dest ring id 2 entries 32 base_addr d269b000
ath10k: boot ce src ring id 3 entries 32 base_addr c09c1000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2d50000
ath10k: boot ce src ring id 7 entries 2 base_addr d2d5f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d2d5e000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd20edd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd20edd3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12bd0000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: mac config channel 2412 mhz flags 0x1a0
ath10k: mac radar config update: chan 2412MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config channel to 2412MHz (cf1 2412MHz cf2 0MHz width 20 (noht))
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac vdev 0 psmode disable
ath10k: wmi set powersave id 0x0 mode 0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath10k: mac vdev 0 psmode disable
ath10k: wmi set powersave id 0x0 mode 0
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: peer-unmap-event: unknown peer id 2
ath10k: boot suspend complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr c09be000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2886000
ath10k: boot ce dest ring id 2 entries 32 base_addr c09bd000
ath10k: boot ce src ring id 3 entries 32 base_addr d2d5f000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2a90000
ath10k: boot ce src ring id 7 entries 2 base_addr d2a9f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d2a9e000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd2973d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd2973d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12cd0000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: mac config channel 2412 mhz flags 0x1a0
ath10k: mac radar config update: chan 2412MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac vdev 0 psmode disable
ath10k: wmi set powersave id 0x0 mode 0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: peer-unmap-event: unknown peer id 2
ath10k: boot suspend complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr d2bd8000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2966000
ath10k: boot ce dest ring id 2 entries 32 base_addr d2a9f000
ath10k: boot ce src ring id 3 entries 32 base_addr d2a97000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2a00000
ath10k: boot ce src ring id 7 entries 2 base_addr d2a0f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d2a0e000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12ad0000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: mac config channel 2412 mhz flags 0x1a0
ath10k: mac radar config update: chan 2412MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac vdev 0 psmode disable
ath10k: wmi set powersave id 0x0 mode 0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
eth0: stopped
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: peer-unmap-event: unknown peer id 2
ath10k: boot suspend complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
Port 0: Link-down
eth0: link up
Port 1: Link-up, Full-duplex, Speed-100Mbps.
Port 2: Link-down
Port 3: Link-down
Port -1: Link-down
eth0: started
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr c09c1000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2d1a000
ath10k: boot ce dest ring id 2 entries 32 base_addr c099b000
ath10k: boot ce src ring id 3 entries 32 base_addr d2a07000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2af0000
ath10k: boot ce src ring id 7 entries 2 base_addr d2aff000
ath10k: boot ce dest ring id 7 entries 2 base_addr d2afe000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12b10000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 2 subtype 0
ath10k: WMI vdev create: id 0 type 2 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 1 value 1
ath10k: wmi sta ps param vdev_id 0x0 param 2 value 0
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: wmi pdev set wmm params
ath10k: wmi sta ps param vdev_id 0x0 param 4 value 0
ath10k: wmi sta ps param vdev_id 0x0 param 0 value 0
ath10k: mac config channel 2412 mhz flags 0x1a0
ath10k: mac radar config update: chan 2412MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: mac vdev 0 psmode disable
ath10k: wmi set powersave id 0x0 mode 0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
mv_eth_tool_get_settings is not supported on eth0
device eth0 entered promiscuous mode
device wlan0 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
br0: port 1(eth0) entering forwarding state
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: peer-unmap-event: unknown peer id 2
ath10k: boot suspend complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00001000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000804
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
br0: port 2(wlan0) entering disabled state
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x00000000
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr d2afe000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2ca0000
ath10k: boot ce dest ring id 2 entries 32 base_addr d2aff000
ath10k: boot ce src ring id 3 entries 32 base_addr d2af8000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2950000
ath10k: boot ce src ring id 7 entries 2 base_addr d295f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d295e000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd2925d3c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12e60000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 1 subtype 0
ath10k: WMI vdev create: id 0 type 1 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: wmi pdev set param 13 value 50
ath10k: wmi vdev id 0x0 set param 38 value 3747
ath10k: wmi vdev id 0x0 set param 39 value 3895
ath10k: wmi vdev id 0x0 set param 40 value 3900
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 1
ath10k: wmi vdev id 0x0 set param 7 value 1
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: mac config channel 2412 mhz flags 0x1a0
ath10k: mac radar config update: chan 2412MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ath10k: mac vdev 0 rts threshold -1
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi mgmt tx skb d2b47c20 len 52 ftype 00 stype c0
ath10k: mac config channel 5240 mhz flags 0x100
ath10k: mac radar config update: chan 5240MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config channel to 5240MHz (cf1 5240MHz cf2 0MHz width 20)
ath10k: mac config power 14
ath10k: wmi pdev set param 3 value 28
ath10k: wmi pdev set param 4 value 28
ath10k: wmi vdev id 0x0 set param 3 value 100
ath10k: mac vdev 0 beacon_interval 100
ath10k: vdev 0 set beacon tx mode to staggered
ath10k: wmi pdev set param 7 value 0
ath10k: mac vdev 0 start center_freq 5240 phymode 11na-ht20
ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5240, mode 4, ch_flags: 0x4, max_
power: 40
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x0 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac vdev 0 up
ath10k: WMI_TBTTOFFSET_UPDATE_EVENTID
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
br0: port 2(wlan0) entering forwarding state
br0: port 2(wlan0) entering forwarding state
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 2
ath10k: wmi vdev id 0x0 set param 7 value 2
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi mgmt tx skb d2a429e0 len 52 ftype 00 stype c0
ath10k: wmi mgmt tx skb d2c5d900 len 56 ftype 00 stype b0
ath10k: vdev 0 set beacon tx mode to staggered
ath10k: wmi pdev set param 7 value 0
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: wmi mgmt tx skb d2c48820 len 152 ftype 00 stype 10
ath10k: mac vdev 0 peer create 00:15:61:10:51:de (new sta) num_peers 1
ath10k: wmi peer create vdev_id 0 peer_addr 00:15:61:10:51:de
ath10k: mac sta 00:15:61:10:51:de associated
ath10k: mac ht peer 00:15:61:10:51:de mcs cnt 8 nss 1
ath10k: mac peer 00:15:61:10:51:de phymode 11na-ht20
ath10k: wmi peer assoc vdev 0 addr 00:15:61:10:51:de
ath10k: wmi vdev 0 peer 0x00:15:61:10:51:de set param 1 value 0
ath10k: wmi event debug mesg len 64
br0: received packet on eth0 with own address as source address
ath10k: firmware crashed!
ath10k: hardware name qca988x hw2.0 version 0x4100016c
ath10k: firmware version: 10.1.467.2-1
ath10k: target register Dump Location: 0x0040AAA4
ath10k: target Register Dump
ath10k: [00]: 0x4100016C 0x000015B3 0x0099F306 0x00955B31
ath10k: [04]: 0x0099F306 0x00060530 0x00000005 0x0040AC62
ath10k: [08]: 0x009B8164 0x004118C4 0x0043DD84 0x00400000
ath10k: [12]: 0x00000009 0xFFFFFFFF 0x0095808C 0x009580A2
ath10k: [16]: 0x00958080 0x0094085D 0x00000000 0x00000000
ath10k: [20]: 0x4099F306 0x0040ABB4 0x00955A00 0x00000003
ath10k: [24]: 0x809995A1 0x0040AC14 0x0040ACB4 0xC099F306
ath10k: [28]: 0x80999400 0x0040AC44 0x004343F0 0x0040ACCC
ath10k: [32]: 0x8098CE0E 0x0040AC64 0x004343F0 0x0040ACCC
ath10k: [36]: 0x809912AC 0x0040AC84 0x004343F0 0x0040ACCC
ath10k: [40]: 0x8099147A 0x0040ACA4 0x0041ED48 0x00434488
ath10k: [44]: 0x80991661 0x0040AD24 0x00000000 0x0042E9FC
ath10k: [48]: 0x8099081C 0x0040AD84 0x00434488 0x0042E928
ath10k: [52]: 0x809909D0 0x0040ADA4 0x00000000 0x0042D704
ath10k: [56]: 0x809968F1 0x0040AEC4 0x0041ED48 0x00000000
ath10k: suspend timed out - target pause event never came
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000c00a
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000000a
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000000a
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000000a
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ieee80211 phy0: Hardware restart was requested
ath10k: boot performing warm chip reset
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000000a
ath10k: boot host cpu intr cause: 0x00000000
ath10k: boot target cpu intr cause: 0x0000000a
ath10k: boot target reset state: 0x00000800
ath10k: boot warm reset complete
ath10k: boot ce src ring id 0 entries 16 base_addr d2951000
ath10k: boot ce dest ring id 1 entries 512 base_addr d2996000
ath10k: boot ce dest ring id 2 entries 32 base_addr d2e89000
ath10k: boot ce src ring id 3 entries 32 base_addr d2bff000
ath10k: boot ce src ring id 4 entries 4096 base_addr d2d10000
ath10k: boot ce src ring id 7 entries 2 base_addr d2d1f000
ath10k: boot ce dest ring id 7 entries 2 base_addr d2d1e000
ath10k: bmi start
ath10k: bmi write address 0x400800 length 4
ath10k: bmi read address 0x400810 length 4
ath10k: bmi write address 0x400810 length 4
ath10k: bmi write address 0x400844 length 4
ath10k: bmi write address 0x400904 length 4
ath10k: bmi read address 0x4008ac length 4
ath10k: boot push board extended data addr 0x0
ath10k: bmi read address 0x400854 length 4
ath10k: bmi write address 0x401cc0 length 2116
ath10k: bmi write address 0x400858 length 4
ath10k: bmi fast download address 0x1234 buffer 0xe211a034 length 6917
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211a034 length 6916
ath10k: bmi lz data buffer 0xd02d9e6c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi execute address 0x1234 param 0x0
ath10k: bmi fast download address 0x1234 buffer 0xe211bb44 length 190250
ath10k: bmi lz stream start address 0x1234
ath10k: bmi lz data buffer 0xe211bb44 length 190248
ath10k: bmi lz data buffer 0xd02d9e6c length 4
ath10k: bmi lz stream start address 0x0
ath10k: bmi write address 0x400814 length 4
ath10k: bmi done
ath10k: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready
ath10k: boot htc ep 0 ul polled 0 dl polled 0
ath10k: boot htc service 'Control' eid 0 TX flow control disabled
ath10k: boot htc service HTT Data does not allocate target credits
ath10k: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready
ath10k: boot htc ep 1 ul polled 1 dl polled 0
ath10k: boot htc service 'HTT Data' eid 1 TX flow control disabled
ath10k: htt tx max num pending tx 1424
ath10k: htt rx ring size 1024 fill_level 1000
ath10k: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready
ath10k: boot htc ep 2 ul polled 0 dl polled 0
ath10k: firmware has requested 1 memory chunks
ath10k: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 404 actual units
145
ath10k: wmi event service ready sw_ver 0x4100270f abi_ver 1 phy_cap 0x00000003 h
t_cap 0x0000085b vht_cap 0x338001b2 vht_supp_msc 0x0000ffea sys_cap_info 0x00000
000 mem_reqs 1 num_rf_chains 3
ath10k: boot wmi ready
ath10k: firmware 10.1.467.2-1 booted
ath10k: wmi sending 1 memory chunks info.
ath10k: wmi chunk 0 len 58580 requested, addr 0x12a60000
ath10k: wmi init 10x
ath10k: wmi event debug print 'P 145 V 16 T 443'
ath10k: wmi event ready sw_version 1090529039 abi_version 1 mac_addr 04:f0:21:0e
:38:be status 0 skb->len 20 ev-sz 20
ath10k: htt target version 2.1
ath10k: wmi pdev set param 30 value 1
ath10k: wmi pdev set param 10 value 1
ath10k: wmi pdev set param 31 value 0
ath10k: mac channel [0/32] freq 2412 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [1/32] freq 2417 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [2/32] freq 2422 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [3/32] freq 2427 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [4/32] freq 2432 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [5/32] freq 2437 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [6/32] freq 2442 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [7/32] freq 2447 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [8/32] freq 2452 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [9/32] freq 2457 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [10/32] freq 2462 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [11/32] freq 2467 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [12/32] freq 2472 maxpower 40 regpower 40 antenna 0 mode 1
ath10k: mac channel [13/32] freq 5180 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [14/32] freq 5200 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [15/32] freq 5220 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [16/32] freq 5240 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [17/32] freq 5260 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [18/32] freq 5280 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [19/32] freq 5300 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [20/32] freq 5320 maxpower 40 regpower 40 antenna 0 mode 0
ath10k: mac channel [21/32] freq 5500 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [22/32] freq 5520 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [23/32] freq 5540 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [24/32] freq 5560 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [25/32] freq 5580 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [26/32] freq 5600 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [27/32] freq 5620 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [28/32] freq 5640 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [29/32] freq 5660 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [30/32] freq 5680 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: mac channel [31/32] freq 5700 maxpower 54 regpower 54 antenna 0 mode 0
ath10k: wmi pdev regdomain rd 37 rd2g 37 rd5g 37 ctl2g 30 ctl5g 30
ath10k: mac vdev create 0 (add interface) type 1 subtype 0
ath10k: WMI vdev create: id 0 type 1 subtype 0 macaddr 04:f0:21:0e:38:be
ath10k: wmi vdev id 0x0 set param 31 value 0
ath10k: vdev param 0 not supported by firmware
ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: wmi pdev set param 13 value 50
ath10k: wmi vdev id 0x0 set param 38 value 3747
ath10k: wmi vdev id 0x0 set param 39 value 3895
ath10k: wmi vdev id 0x0 set param 40 value 3900
ath10k: wmi vdev id 0x0 set param 1 value -1
ath10k: wmi vdev id 0x0 set param 2 value -1
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: wmi pdev set wmm params
ath10k: mac config channel 5240 mhz flags 0x100
ath10k: mac radar config update: chan 5240MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config power 14
ath10k: wmi pdev set param 3 value 28
ath10k: wmi pdev set param 4 value 28
ath10k: wmi vdev id 0x0 set param 3 value 100
ath10k: mac vdev 0 beacon_interval 100
ath10k: vdev 0 set beacon tx mode to staggered
ath10k: wmi pdev set param 7 value 0
ath10k: mac vdev 0 create peer 04:f0:21:0e:38:be
ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: mac vdev 0 start center_freq 5240 phymode 11na-ht20
ath10k: wmi vdev start id 0x0 flags: 0x0, freq 5240, mode 4, ch_flags: 0x4, max_
power: 40
ath10k: WMI_VDEV_START_RESP_EVENTID
ath10k: wmi mgmt vdev up id 0x0 assoc id 0 bssid 04:f0:21:0e:38:be
ath10k: mac vdev 0 up
ath10k: mac vdev 0 cts_prot 0
ath10k: wmi vdev id 0x0 set param 43 value 0
ath10k: mac vdev 0 slot_time 2
ath10k: wmi vdev id 0x0 set param 7 value 2
ath10k: WMI_TBTTOFFSET_UPDATE_EVENTID
ath10k: mac vdev 0 preamble 1n
ath10k: wmi vdev id 0x0 set param 8 value 1
ath10k: mac vdev 0 peer create 00:15:61:10:51:de (new sta) num_peers 2
ath10k: wmi peer create vdev_id 0 peer_addr 00:15:61:10:51:de
ath10k: mac sta 00:15:61:10:51:de associated
ath10k: mac ht peer 00:15:61:10:51:de mcs cnt 8 nss 1
ath10k: mac peer 00:15:61:10:51:de phymode 11na-ht20
ath10k: wmi peer assoc vdev 0 addr 00:15:61:10:51:de
ath10k: wmi vdev 0 peer 0x00:15:61:10:51:de set param 1 value 0
ath10k: device successfully recovered
ath10k: wmi mgmt tx skb d2c5d3c0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc6460 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc6520 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc65e0 len 180 ftype 00 stype 50
ath10k: wmi event debug mesg len 52
ath10k: wmi mgmt tx skb d2bc62e0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc6220 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc6160 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bc60a0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcaf00 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcae40 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcad80 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcacc0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcac00 len 180 ftype 00 stype 50
eth0: no IPv6 routers present
ath10k: wmi mgmt tx skb d2bcab40 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bcaa80 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca9c0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca900 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca840 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca780 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca6c0 len 180 ftype 00 stype 50
br0: no IPv6 routers present
ath10k: wmi mgmt tx skb d2bca600 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca540 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca480 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca3c0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca300 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca240 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca180 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2bca0c0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64f20 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64e60 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64da0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64ce0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64c20 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64b60 len 180 ftype 00 stype 50
wlan0: no IPv6 routers present
ath10k: wmi mgmt tx skb d2b64aa0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b649e0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64920 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b64860 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b647a0 len 180 ftype 00 stype 50
ath10k: wmi mgmt tx skb d2b646e0 len 180 ftype 00 stype 50
ath10k: mac sta 00:15:61:10:51:de disassociated
ath10k: mac vdev 0 peer delete 00:15:61:10:51:de (sta gone)
ath10k: wmi peer delete vdev_id 0 peer_addr 00:15:61:10:51:de
ath10k: wmi vdev stop id 0x0
ath10k: WMI_VDEV_STOPPED_EVENTID
ath10k: mac config channel 5240 mhz flags 0x100
ath10k: mac radar config update: chan 5240MHz radar 0 chan radar 0 chan state US
ABLE
ath10k: mac config channel to 5240MHz (cf1 5240MHz cf2 0MHz width 20 (noht))
ath10k: mac config power 20
ath10k: wmi pdev set param 3 value 40
ath10k: wmi pdev set param 4 value 40
ath10k: wmi peer delete vdev_id 0 peer_addr 04:f0:21:0e:38:be
ath10k: Failed to remove peer for AP vdev 0: -110
ath10k: mac vdev 0 delete (remove interface)
ath10k: WMI vdev delete id 0
ath10k: removing stale peer 04:f0:21:0e:38:be from vdev_id 0
br0: port 2(wlan0) entering forwarding state
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-04-30 12:43 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-10 4:14 Crash during driver startup Ben Greear
2014-04-10 10:05 ` [PATCH] ath10k: double check bmi xfer pointers Michal Kazior
2014-04-10 10:05 ` Michal Kazior
2014-04-10 13:42 ` Ben Greear
2014-04-10 13:42 ` Ben Greear
2014-04-11 5:40 ` Kalle Valo
2014-04-11 5:40 ` Kalle Valo
2014-04-11 5:47 ` Michal Kazior
2014-04-11 5:47 ` Michal Kazior
2014-04-11 7:58 ` Michal Kazior
2014-04-11 7:58 ` Michal Kazior
2014-04-11 15:09 ` load module ath10k: ieee80211 phy0: Failed to initialize wep: -2 Vu Hai NGUYEN
2014-04-14 6:39 ` Michal Kazior
2014-04-14 8:10 ` Kalle Valo
2014-04-14 15:49 ` RE : " Vu Hai NGUYEN
2014-04-15 8:20 ` Report Firmware firmware-2.bin_10.1.467.2-1 Error Vu Hai NGUYEN
2014-04-15 11:02 ` Kalle Valo
2014-04-16 11:51 ` RE : " Vu Hai NGUYEN
2014-04-16 11:51 ` Vu Hai NGUYEN
2014-04-24 6:35 ` Kalle Valo
2014-04-24 9:03 ` RE : " Vu Hai NGUYEN
2014-04-24 9:41 ` Michal Kazior
2014-04-24 10:18 ` Yeoh Chun-Yeow
2014-04-30 12:39 ` Vu Hai NGUYEN [this message]
2014-05-07 7:36 ` ath10k does not support selection antenna yet? Vu Hai NGUYEN
2014-05-07 7:48 ` Michal Kazior
2014-05-07 8:16 ` Yeoh Chun-Yeow
2014-05-07 8:16 ` RE : " Vu Hai NGUYEN
2014-05-07 9:26 ` Janusz Dziedzic
2014-05-07 14:11 ` Ben Greear
2014-05-07 14:21 ` Adrian Chadd
2014-05-07 14:33 ` Ben Greear
2014-05-07 14:50 ` Adrian Chadd
2014-05-07 15:09 ` Ben Greear
2014-04-14 8:05 ` [PATCH] ath10k: double check bmi xfer pointers Kalle Valo
2014-04-14 8:05 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=EE97821C81277E459BEA5C6384C6F241012F0EFBBCB2@srvexch01.SODIELEC.local \
--to=vh.nguyen@actiasodielec.fr \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@qca.qualcomm.com \
--cc=michal.kazior@tieto.com \
--cc=p.carneiro@actiasodielec.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.