All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: Xu Jiucheng <Jiucheng.Xu@freescale.com>
Cc: Matthew McClintock <msm@freescale.com>, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] powerpc/85xx: Add dts files for P1021RDB-PC board
Date: Tue, 10 Jul 2012 06:48:24 -0500	[thread overview]
Message-ID: <EFC9D38C-4F08-4655-A0DA-9D92A3559C96@kernel.crashing.org> (raw)
In-Reply-To: <1341909561-6591-1-git-send-email-Jiucheng.Xu@freescale.com>


On Jul 10, 2012, at 3:39 AM, Xu Jiucheng wrote:

> P1021RDB-PC Overview
> -----------------
> 1Gbyte DDR3 (on board DDR)
> 16Mbyte NOR flash
> 32Mbyte eSLC NAND Flash
> 256 Kbit M24256 I2C EEPROM
> 128 Mbit SPI Flash memory
> Real-time clock on I2C bus
> SD/MMC connector to interface with the SD memory card
> PCIex
> 	- x1 PCIe slot or x1 PCIe to dual SATA controller
> 	- x1 mini-PCIe slot
> USB 2.0
> 	- ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic=92s =
GL850A
> 	- Two USB2.0 Type A receptacles
> 	- One USB2.0 signal to Mini PCIe slot
> eTSEC1: Connected to RGMII PHY VSC7385
> eTSEC2: Connected to SGMII PHY VSC8221
> eTSEC3: Connected to SGMII PHY AR8021
> DUART interface: supports two UARTs up to 115200 bps for console =
display
>=20
> Signed-off-by: Xu Jiucheng <Jiucheng.Xu@freescale.com>
> Signed-off-by: Matthew McClintock <msm@freescale.com>
> ---
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi    |  236 =
+++++++++++++++++++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc_32b.dts |   96 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc_36b.dts |   96 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb.dts        |   96 ------------
> arch/powerpc/boot/dts/p1021rdb.dtsi       |  236 =
-----------------------------
> arch/powerpc/boot/dts/p1021rdb_36b.dts    |   96 ------------
> 6 files changed, 428 insertions(+), 428 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
> create mode 100644 arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb.dts
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb.dtsi
> delete mode 100644 arch/powerpc/boot/dts/p1021rdb_36b.dts

Do we really need a 32 & 36 bit device tree for this board?  Isnt the =
memory fixed so why not just have 32b?

Also, why are you removing the dts for the older P1021RDB??

- k=

  parent reply	other threads:[~2012-07-10 11:48 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-10  8:39 [PATCH] powerpc/85xx: Add dts files for P1021RDB-PC board Xu Jiucheng
2012-07-10  8:39 ` [PATCH 2/2] powerpc/85xx: Create dts of each core in CAMP mode for P1021RDB-PC Xu Jiucheng
2012-07-10 12:25   ` Tabi Timur-B04825
2012-07-11 14:47     ` Kumar Gala
2012-07-11 14:49       ` Timur Tabi
2012-07-11 14:52         ` AW: " Schneider, Kolja
2012-07-11 14:56           ` Timur Tabi
2012-07-11 14:53         ` Kumar Gala
2012-07-11 14:56           ` Timur Tabi
2012-07-12  3:16             ` Kumar Gala
2012-07-12  3:53               ` Tabi Timur-B04825
2012-07-12  4:05                 ` Kumar Gala
2012-07-10 15:57   ` Scott Wood
2012-07-10 11:48 ` Kumar Gala [this message]
2012-07-11  9:58   ` [PATCH] powerpc/85xx: Add dts files for P1021RDB-PC board Jiucheng Xu
2012-07-11 12:31     ` Kumar Gala
2012-07-11 12:43 ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=EFC9D38C-4F08-4655-A0DA-9D92A3559C96@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=Jiucheng.Xu@freescale.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msm@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.