From: Prafulla Wadaskar <prafulla@marvell.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 5/5] Pantheon: Add Board Support for Marvell dkb board
Date: Mon, 10 Jan 2011 06:34:31 -0800 [thread overview]
Message-ID: <F766E4F80769BD478052FB6533FA745D19F461641D@SC-VEXCH4.marvell.com> (raw)
In-Reply-To: <1294632087-8025-6-git-send-email-leiwen@marvell.com>
> -----Original Message-----
> From: Lei Wen [mailto:leiwen at marvell.com]
> Sent: Monday, January 10, 2011 9:31 AM
> To: u-boot at lists.denx.de; Prafulla Wadaskar; Yu Tang; Ashish Karkare;
> Prabhanjan Sarnaik; adrian . wenl @ gmail . com "
> Subject: [PATCH V2 5/5] Pantheon: Add Board Support for Marvell dkb
> board
>
> DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with
> * Processor upto 806Mhz
> * LPDDR1/2
> * x8/x16 SLC/MLC NAND
> * Footprints for eMMC & MMC x8 card
>
> With Peripherals:
> * Parallel LCD I/F
> * Audio codecs (88PM8607)
> * MIPI CSI-2 camera
> * Marvell 88W8787 802.11n/BT module
> * Marvell 2G/3G RF
> * Dual analog mics & speakers, headset jack, LED, ambient
> * USB2.0 HS host, OTG (mini AB)
> * GPIO, GPIO expander with DIP switches for easier selection
> * UART serial over USB, CIR
>
> This patch adds basic board support with DRAM and UART functionality
>
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> ---
> MAINTAINERS | 4 +++
> board/Marvell/dkb/Makefile | 51 +++++++++++++++++++++++++++++++++++
> board/Marvell/dkb/dkb.c | 53 ++++++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/dkb.h | 64
> ++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 173 insertions(+), 0 deletions(-)
> create mode 100644 board/Marvell/dkb/Makefile
> create mode 100644 board/Marvell/dkb/dkb.c
> create mode 100644 include/configs/dkb.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 96fad4b..0a37a01 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -839,6 +839,10 @@ Prafulla Wadaskar <prafulla@marvell.com>
> rd6281a ARM926EJS (Kirkwood SoC)
> sheevaplug ARM926EJS (Kirkwood SoC)
>
> +Lei Wen <leiwen@marvell.com>
> +
> + dkb ARM926EJS (PANTHEON 88AP920 SOC)
> +
> Matthias Weisser <weisserm@arcor.de>
>
> jadecpu ARM926EJS (MB86R01 SoC)
> diff --git a/board/Marvell/dkb/Makefile b/board/Marvell/dkb/Makefile
> new file mode 100644
> index 0000000..8835f8e
> --- /dev/null
> +++ b/board/Marvell/dkb/Makefile
> @@ -0,0 +1,51 @@
> +#
> +# (C) Copyright 2010
Ditto
Regards..
Prafulla . .
next prev parent reply other threads:[~2011-01-10 14:34 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-10 4:01 [U-Boot] [PATCH V2 0/5] Add Pantheon soc and dkb board support Lei Wen
2011-01-10 4:01 ` [U-Boot] [PATCH V2 1/5] mv: seperate kirkwood and armada from common setting Lei Wen
2011-01-10 14:30 ` Prafulla Wadaskar
2011-01-10 4:01 ` [U-Boot] [PATCH V2 2/5] ARM: Add Support for Marvell Pantheon Familiy SoCs Lei Wen
2011-01-10 14:33 ` Prafulla Wadaskar
2011-01-25 21:32 ` Wolfgang Denk
2011-01-26 2:01 ` Lei Wen
2011-01-26 7:50 ` Wolfgang Denk
2011-01-10 4:01 ` [U-Boot] [PATCH V2 3/5] serial: add pantheon soc support Lei Wen
2011-01-25 21:25 ` Wolfgang Denk
2011-01-26 6:49 ` Prafulla Wadaskar
2011-01-10 4:01 ` [U-Boot] [PATCH V2 4/5] mvmfp: add MFP configuration support for PANTHEON Lei Wen
2011-01-25 21:34 ` Wolfgang Denk
2011-01-26 1:51 ` Lei Wen
2011-01-26 7:39 ` Wolfgang Denk
2011-01-26 7:48 ` Lei Wen
2011-01-26 8:06 ` Wolfgang Denk
2011-01-26 8:08 ` Lei Wen
2011-01-26 7:44 ` Wolfgang Denk
2011-01-26 7:51 ` Lei Wen
2011-01-26 8:07 ` Wolfgang Denk
2011-01-26 8:09 ` Lei Wen
2011-01-10 4:01 ` [U-Boot] [PATCH V2 5/5] Pantheon: Add Board Support for Marvell dkb board Lei Wen
2011-01-10 14:34 ` Prafulla Wadaskar [this message]
2011-01-10 14:35 ` [U-Boot] [PATCH V2 0/5] Add Pantheon soc and dkb board support Prafulla Wadaskar
2011-01-10 14:51 ` Lei Wen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F766E4F80769BD478052FB6533FA745D19F461641D@SC-VEXCH4.marvell.com \
--to=prafulla@marvell.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.