From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wenyou.Yang at microchip.com Date: Tue, 7 Feb 2017 06:15:52 +0000 Subject: [U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT In-Reply-To: <20bdde9c-9d17-958a-5f9f-864e51953740@biessmann.org> References: <1477639009-10675-1-git-send-email-wenyou.yang@atmel.com> <20bdde9c-9d17-958a-5f9f-864e51953740@biessmann.org> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Andreas, Thank you very much for your review! a lot of patches. > -----Original Message----- > From: Andreas Bie?mann [mailto:andreas at biessmann.org] > Sent: 2017?2?7? 3:52 > To: Wenyou Yang - A41535 ; U-Boot Mailing List > > Subject: Re: [U-Boot] [PATCH v2 0/8] board: sama5d4: convert boards to support > DM/DT > > Hi Wenyou, > > On 28.10.16 09:16, Wenyou Yang wrote: > > The purpose of patch set is to convert the board to support Device > > Tree and Driver Model. > > > > They are based on the following patches: > > 1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver > > http://lists.denx.de/pipermail/u-boot/2016-October/270991.html > > 2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of > SAMA5D4 > > http://lists.denx.de/pipermail/u-boot/2016-October/271004.html > > 3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early debug > UART > > http://lists.denx.de/pipermail/u-boot/2016-October/270250.html > > 4./ [PATCH v1 0/3] gpio: at91_gpio: Add option and clock support > > http://lists.denx.de/pipermail/u-boot/2016-October/270687.html > > 5./ [PATCH v10] dm: at91: Add driver model support for the spi driver > > http://lists.denx.de/pipermail/u-boot/2016-October/270516.html > > > > could you please send this series rebased on current ToT? Okay, I will rebase it and sent. > > Andreas > > > Changes in v2: > > - Restore the wrong removal #define CONFIG_USB_ETHER. > > - Update the commit log. > > - Restore the wrong removal of USB related code. > > - Update the commit log. > > - Restore wrong removal of #define CONFIG_USB_ETHER. > > - Update the commit log. > > - Restore the wrong removal USB related code. > > - Update the commit log. > > > > Wenyou Yang (8): > > configs: at91-sama5_common: fix for CONFIG_AT91_GPIO > > board: sama5d4_xplained: move config options to defconfig > > board: sama5d4_xplained: clean up code > > board: sama5d4_xplained: enable early debug UART > > board: sama5d4ek: move config options to defconfig > > board: sama5d4ek: clean up code > > board: sama5d4ek: enable early debug UART > > configs: sama5d4: move CONFIG_SYS_NO_FLASH to *defconfig > > > > board/atmel/sama5d4_xplained/sama5d4_xplained.c | 100 ++++------------------- > > board/atmel/sama5d4ek/sama5d4ek.c | 101 ++++-------------------- > > configs/sama5d4_xplained_mmc_defconfig | 31 +++++++- > > configs/sama5d4_xplained_nandflash_defconfig | 33 +++++++- > > configs/sama5d4_xplained_spiflash_defconfig | 31 +++++++- > > configs/sama5d4ek_mmc_defconfig | 30 +++++++ > > configs/sama5d4ek_nandflash_defconfig | 30 +++++++ > > configs/sama5d4ek_spiflash_defconfig | 30 +++++++ > > include/configs/at91-sama5_common.h | 2 + > > include/configs/sama5d4_xplained.h | 28 +------ > > include/configs/sama5d4ek.h | 29 +------ > > 11 files changed, 216 insertions(+), 229 deletions(-) > > Best Regards, Wenyou Yang